Re: Nokia N900: musb is in wrong state after boot

From: Pali RohÃr
Date: Sat Jan 23 2016 - 07:57:50 EST


On Thursday 21 January 2016 20:21:13 Tony Lindgren wrote:
> * joerg Reisenweber <joerg@xxxxxxxxxxxx> [160121 10:45]:
> > On Thu 21 January 2016 09:41:46 Tony Lindgren wrote:
> > > Then for supporting the USB host mode.. We should add regulator
> > > support to the USB PHY driver so if the ID pin is grounded, the
> > > PHY driver enables the VBUS regulator. That too seems to need
> > > some coordination between the drivers/phy/phy-twl4030-usb.c and
> > > 1707 driver if the ID pin interrupt is only detected in
> > > drivers/phy/phy-twl4030-usb.c.
> >
> > Note that, while this is probably a good thing to do, it needs to
> > be sufficiently loose coupling to allow user to 'intercept' this
> > VBOOS regulator enabling and instead allow device charging while
> > in externally powered hostmode. There's even a spec for this in
> > USB-docs-foo iirc, something along a certain resistor value on ID
> > to GND - alas I guess the twl4030 is not capable to detect such
> > sophisticated signaling, and anyway it's always desirable to allow
> > user to manually override the VBOOST and enable VBUS-charging
> > while in hostmode.
>
> OK, I think this is what's happening with the Motorola LapDock BTW.
> It always feeds the VBUS, well most of the time. Do you have some
> pointer to the "certain resistor value on ID to GND" spec? Is it
> maybe part of the carkit related parts of the USB spec?
>
> > On N900 the situation is even more complex since the 1707 doesn't
> > support genuine ID detection, neither does it support emulated ID
> > grounding. And there's no other method than a ID=GND message from
> > PHY to musb core to make the musb core state engine transfer into
> > proper hostmode. Thus my H-E-N hostmode botch abuses debug flags
> > to force the musb core into a "emulated" hostmode and this mode
> > doesn't support USB speed detection. Thus speed settings are
> > forced onto musb core and PHY by software, and the musb core speed
> > bits are only effective before session enabled.
> > Bottom line: you need VBUS to try and negotiate speed with the
> > attached device in hostmode, but to actually set this speed you
> > detected by software means, you need to disable and discharge VBUS
> > again, or musb core won't care about the speed you set. To be
> > utterly clear: unconditional enabling of VBUS in ID=GND won't
> > work.
> >
> > This is quite complex and it's questionable if it could get handled
> > reasonably in kernel space. *Very* N900 specific niche solution,
> > I'd not think it's suited for upstreaming.
>
> Yeah OK. I think we should be able to support the aux VBUS regulator
> part with mainline kernel though.
>
> Regards,
>
> Tony

Hello, attached patch for musb debugfs adds option to force both
hostmode with speed. It is just example, I tested only compilation.

Something like that will be needed for usb host mode on Nokia N900.

--
Pali RohÃr
pali.rohar@xxxxxxxxx
From fd67b58e3538c0732750ecad915cde736da099dc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali.rohar@xxxxxxxxx>
Date: Sat, 9 Jan 2016 16:57:59 +0100
Subject: [PATCH] musb: debugfs: Add support in testmode for forcing host mode
together with speed

---
drivers/usb/musb/musb_debugfs.c | 44 +++++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 9b22d94..62c13a2 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -147,28 +147,34 @@ static int musb_test_mode_show(struct seq_file *s, void *unused)

test = musb_readb(musb->mregs, MUSB_TESTMODE);

- if (test & MUSB_TEST_FORCE_HOST)
+ if (test & (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS))
+ seq_printf(s, "force host full-speed\n");
+
+ else if (test & (MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS))
+ seq_printf(s, "force host high-speed\n");
+
+ else if (test & MUSB_TEST_FORCE_HOST)
seq_printf(s, "force host\n");

- if (test & MUSB_TEST_FIFO_ACCESS)
+ else if (test & MUSB_TEST_FIFO_ACCESS)
seq_printf(s, "fifo access\n");

- if (test & MUSB_TEST_FORCE_FS)
+ else if (test & MUSB_TEST_FORCE_FS)
seq_printf(s, "force full-speed\n");

- if (test & MUSB_TEST_FORCE_HS)
+ else if (test & MUSB_TEST_FORCE_HS)
seq_printf(s, "force high-speed\n");

- if (test & MUSB_TEST_PACKET)
+ else if (test & MUSB_TEST_PACKET)
seq_printf(s, "test packet\n");

- if (test & MUSB_TEST_K)
+ else if (test & MUSB_TEST_K)
seq_printf(s, "test K\n");

- if (test & MUSB_TEST_J)
+ else if (test & MUSB_TEST_J)
seq_printf(s, "test J\n");

- if (test & MUSB_TEST_SE0_NAK)
+ else if (test & MUSB_TEST_SE0_NAK)
seq_printf(s, "test SE0 NAK\n");

return 0;
@@ -206,30 +212,36 @@ static ssize_t musb_test_mode_write(struct file *file,
if (copy_from_user(buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;

- if (strstarts(buf, "force host"))
+ if (strstarts(buf, "force host full-speed"))
+ test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_FS;
+
+ else if (strstarts(buf, "force host high-speed"))
+ test = MUSB_TEST_FORCE_HOST | MUSB_TEST_FORCE_HS;
+
+ else if (strstarts(buf, "force host"))
test = MUSB_TEST_FORCE_HOST;

- if (strstarts(buf, "fifo access"))
+ else if (strstarts(buf, "fifo access"))
test = MUSB_TEST_FIFO_ACCESS;

- if (strstarts(buf, "force full-speed"))
+ else if (strstarts(buf, "force full-speed"))
test = MUSB_TEST_FORCE_FS;

- if (strstarts(buf, "force high-speed"))
+ else if (strstarts(buf, "force high-speed"))
test = MUSB_TEST_FORCE_HS;

- if (strstarts(buf, "test packet")) {
+ else if (strstarts(buf, "test packet")) {
test = MUSB_TEST_PACKET;
musb_load_testpacket(musb);
}

- if (strstarts(buf, "test K"))
+ else if (strstarts(buf, "test K"))
test = MUSB_TEST_K;

- if (strstarts(buf, "test J"))
+ else if (strstarts(buf, "test J"))
test = MUSB_TEST_J;

- if (strstarts(buf, "test SE0 NAK"))
+ else if (strstarts(buf, "test SE0 NAK"))
test = MUSB_TEST_SE0_NAK;

musb_writeb(musb->mregs, MUSB_TESTMODE, test);
--
1.7.9.5

Attachment: signature.asc
Description: This is a digitally signed message part.