[PATCH v2 02/51] mtd: create an mtd_oobavail() helper and make use of it

From: Boris Brezillon
Date: Thu Feb 04 2016 - 05:29:48 EST


Currently, all MTD drivers/sublayers exposing an OOB area are
doing the same kind of test to extract the available OOB size
based on the mtd_info and mtd_oob_ops structures.
Move this common logic into an inline function and make use of it.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
Suggested-by: Priit Laes <plaes@xxxxxxxxx>
---
drivers/mtd/mtdpart.c | 5 +----
drivers/mtd/nand/nand_base.c | 16 ++++------------
drivers/mtd/onenand/onenand_base.c | 19 +++----------------
include/linux/mtd/mtd.h | 5 +++++
4 files changed, 13 insertions(+), 32 deletions(-)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 10bf304..08de4b2 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -126,10 +126,7 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
if (ops->oobbuf) {
size_t len, pages;

- if (ops->mode == MTD_OPS_AUTO_OOB)
- len = mtd->oobavail;
- else
- len = mtd->oobsize;
+ len = mtd_oobavail(mtd, ops);
pages = mtd_div_by_ws(mtd->size, mtd);
pages -= mtd_div_by_ws(from, mtd);
if (ops->ooboffs + ops->ooblen > pages * len)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 21c48ff..7f21719 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1723,8 +1723,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
- uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
- mtd->oobavail : mtd->oobsize;
+ uint32_t max_oobsize = mtd_oobavail(mtd, ops);

uint8_t *bufpoi, *oob, *buf;
int use_bufpoi;
@@ -2075,10 +2074,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,

stats = mtd->ecc_stats;

- if (ops->mode == MTD_OPS_AUTO_OOB)
- len = mtd->oobavail;
- else
- len = mtd->oobsize;
+ len = mtd_oobavail(mtd, ops);

if (unlikely(ops->ooboffs >= len)) {
pr_debug("%s: attempt to start read outside oob\n",
@@ -2575,8 +2571,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
uint32_t writelen = ops->len;

uint32_t oobwritelen = ops->ooblen;
- uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
- mtd->oobavail : mtd->oobsize;
+ uint32_t oobmaxlen = mtd_oobavail(mtd, ops);

uint8_t *oob = ops->oobbuf;
uint8_t *buf = ops->datbuf;
@@ -2766,10 +2761,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
pr_debug("%s: to = 0x%08x, len = %i\n",
__func__, (unsigned int)to, (int)ops->ooblen);

- if (ops->mode == MTD_OPS_AUTO_OOB)
- len = mtd->oobavail;
- else
- len = mtd->oobsize;
+ len = mtd_oobavail(mtd, ops);

/* Do not allow write past end of page */
if ((ops->ooboffs + ops->ooblen) > len) {
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index d70bbfd..03a80de 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1124,11 +1124,7 @@ static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
(int)len);

- if (ops->mode == MTD_OPS_AUTO_OOB)
- oobsize = mtd->oobavail;
- else
- oobsize = mtd->oobsize;
-
+ oobsize = mtd_oobavail(mtd, ops);
oobcolumn = from & (mtd->oobsize - 1);

/* Do not allow reads past end of device */
@@ -1229,11 +1225,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
pr_debug("%s: from = 0x%08x, len = %i\n", __func__, (unsigned int)from,
(int)len);

- if (ops->mode == MTD_OPS_AUTO_OOB)
- oobsize = mtd->oobavail;
- else
- oobsize = mtd->oobsize;
-
+ oobsize = mtd_oobavail(mtd, ops);
oobcolumn = from & (mtd->oobsize - 1);

/* Do not allow reads past end of device */
@@ -1885,12 +1877,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
/* Check zero length */
if (!len)
return 0;
-
- if (ops->mode == MTD_OPS_AUTO_OOB)
- oobsize = mtd->oobavail;
- else
- oobsize = mtd->oobsize;
-
+ oobsize = mtd_oobavail(mtd, ops);
oobcolumn = to & (mtd->oobsize - 1);

column = to & (mtd->writesize - 1);
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 9cf13c4..7712721 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -264,6 +264,11 @@ static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
return mtd->dev.of_node;
}

+static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
+{
+ return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
+}
+
int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
void **virt, resource_size_t *phys);
--
2.1.4