Re: [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT

From: Andrew Lunn
Date: Wed Feb 10 2016 - 13:09:32 EST


On Tue, Feb 09, 2016 at 09:01:12PM +0100, Bernhard Walle wrote:
> We need that for a custom hardware that needs the reverse reset
> sequence.
>
> Signed-off-by: Bernhard Walle <bernhard@xxxxxxxxx>

Thanks for updating the Documentation.

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

Andrew

> ---
> Changes compared to v1:
> - Add documentation to 'phy-reset-gpios' that flags are ignored
> as suggested by Andrew Lunn.
>
> Documentation/devicetree/bindings/net/fsl-fec.txt | 7 ++++++-
> drivers/net/ethernet/freescale/fec_main.c | 8 ++++++--
> 2 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
> index a9eb611..0caa429 100644
> --- a/Documentation/devicetree/bindings/net/fsl-fec.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
> @@ -7,11 +7,16 @@ Required properties:
> - phy-mode : See ethernet.txt file in the same directory
>
> Optional properties:
> -- phy-reset-gpios : Should specify the gpio for phy reset
> +- phy-reset-gpios : Should specify the gpio for phy reset. Additional
> + flags are ignored, see the non-standard 'phy-reset-active-low' property
> + instead.
> - phy-reset-duration : Reset duration in milliseconds. Should present
> only if property "phy-reset-gpios" is available. Missing the property
> will have the duration be 1 millisecond. Numbers greater than 1000 are
> invalid and 1 millisecond will be used instead.
> +- phy-reset-active-low : If present then the reset sequence using the GPIO
> + specified in the "phy-reset-gpios" property is reversed (H=reset state,
> + L=operation state).
> - phy-supply : regulator that powers the Ethernet PHY.
> - phy-handle : phandle to the PHY device connected to this device.
> - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index 41c81f6..98caf87 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -3229,6 +3229,7 @@ static int fec_enet_init(struct net_device *ndev)
> static void fec_reset_phy(struct platform_device *pdev)
> {
> int err, phy_reset;
> + bool active_low = false;
> int msec = 1;
> struct device_node *np = pdev->dev.of_node;
>
> @@ -3244,14 +3245,17 @@ static void fec_reset_phy(struct platform_device *pdev)
> if (!gpio_is_valid(phy_reset))
> return;
>
> + active_low = of_property_read_bool(np, "phy-reset-active-low");
> +
> err = devm_gpio_request_one(&pdev->dev, phy_reset,
> - GPIOF_OUT_INIT_LOW, "phy-reset");
> + active_low ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
> + "phy-reset");
> if (err) {
> dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
> return;
> }
> msleep(msec);
> - gpio_set_value_cansleep(phy_reset, 1);
> + gpio_set_value_cansleep(phy_reset, !active_low);
> }
> #else /* CONFIG_OF */
> static void fec_reset_phy(struct platform_device *pdev)
> --
> 2.7.1
>