Re: [PATCH 1/1] MIPS: DTS: cavium-octeon: provide model attribute

[Heinrich Schuchardt]

On 02/15/2016 12:16 PM, Sergei Shtylyov wrote:
> Hello.
> 
> On 2/15/2016 8:26 AM, Heinrich Schuchardt wrote:
> 
>> Downstream packages like Debian flash-kernel rely on
>> /proc/device-tree/model
>> to determine how to install an updated kernel image.
>>
>> Most dts files provide this property.
>> It is suggested by IEEE Std 1275-1994.
>>
>> This patch adds a model attribute for Octeon CPUs.
>>
>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@xxxxxx>
>> ---
>>   arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts | 1 +
>>   arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts | 1 +
>>   2 files changed, 2 insertions(+)
>>
>> diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
>> b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
>> index 9c48e05..a746678 100644
>> --- a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
>> +++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
>> @@ -8,6 +8,7 @@
>>    */
>>   / {
>>       compatible = "cavium,octeon-3860";
>> +    model = "Cavium Octeon 3XXX";
>>       #address-cells = <2>;
>>       #size-cells = <2>;
>>       interrupt-parent = <&ciu>;
>> diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
>> b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
>> index 79b46fc..c8a292a 100644
>> --- a/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
>> +++ b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
>> @@ -8,6 +8,7 @@
>>    */
>>   / {
>>       compatible = "cavium,octeon-6880";
>> +    model = "Cavium Octeon 68XX";
>>       #address-cells = <2>;
>>       #size-cells = <2>;
>>       interrupt-parent = <&ciu2>;
> 
>     The ePAPR 1.1 standard says:
> 
> 2.3.2 model
> 
> Property: model
> Value type: <string>
> Description:
>     The model property value is a <string> that specifies the
>      manufacturer’s model number of the device.
> 
>     The recommended format is: “manufacturer,model”, where manufacturer
>     is a string describing the name of the manufacturer (such as a stock
>     ticker symbol), and model specifies the model number.
> 
> Example:
>     model = “fsl,MPC8349EMITX”;
> 
> MBR, Sergei
> 
> 

Hello Sergei, hello Arnd,

thank you for reviewing.

IEEE Std 1275-1994 says stock symbols should be in upper case.

I guess international standards should have precedence over papers valid
for a single architecture (power.org).

Would you support a patch having the following strings?

model = "CAVM, Octeon 3860";
model = "CAVM, Octeon 6880";

Otherwise, please, make a suggestion.

Best regards

Heinrich Schuchardt