Re: [PATCH v2] irqchip: irq-mvebu-odmi: new driver for platform MSI on Marvell 7K/8K

From: Marc Zyngier
Date: Thu Feb 18 2016 - 11:41:32 EST


Hey Thomas,

It looks really nice, except for a couple of points, see below.

On 18/02/16 15:58, Thomas Petazzoni wrote:
> This commits adds a new irqchip driver that handles the ODMI
> controller found on Marvell 7K/8K processors. The ODMI controller
> provide MSI interrupt functionality to on-board peripherals, much like
> the GIC-v2m.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> ---
> Changes v1 -> v2:
> - Better commit title, as suggested by Marc Zyngier.
> - Improve the DT binding documentation, as suggested by Marc Zingier:
> add a reference to the GIC documentation, be more specific about
> the marvell,spi-base values, and add the requirement of the
> interrupt-parent property.
> - As suggested by Marc Zyngier, use a single global bitmap to
> allocate all ODMIs, regardless of the frame they belong to. As part
> of this change, the hwirq used to identify the interrupt inside the
> ODMI irqdomain are 0-based (instead of being based on their
> corresponding SPI base value), which allows to significantly
> simplify the allocation/free logic.
> ---
> .../marvell,odmi-controller.txt | 41 ++++
> drivers/irqchip/Kconfig | 4 +
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-mvebu-odmi.c | 248 +++++++++++++++++++++
> 4 files changed, 294 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
> create mode 100644 drivers/irqchip/irq-mvebu-odmi.c
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
> new file mode 100644
> index 0000000..252d5c9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
> @@ -0,0 +1,41 @@
> +
> +* Marvell ODMI for MSI support
> +
> +Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller
> +which can be used by on-board peripheral for MSI interrupts.
> +
> +Required properties:
> +
> +- compatible : The value here should contain "marvell,odmi-controller".
> +
> +- interrupt,controller : Identifies the node as an interrupt controller.
> +
> +- msi-controller : Identifies the node as an MSI controller.
> +
> +- marvell,odmi-frames : Number of ODMI frames available. Each frame
> + provides a number of events.
> +
> +- reg : List of register definitions, one for each
> + ODMI frame.
> +
> +- marvell,spi-base : List of GIC base SPI interrupts, one for each
> + ODMI frame. Those SPI interrupts are 0-based,
> + i.e marvell,spi-base = <128> will use SPI #96.
> + See Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
> + for details about the GIC Device Tree binding.
> +
> +- interrupt-parent : Reference to the parent interrupt controller.
> +
> +Example:
> +
> + odmi: odmi@300000 {
> + compatible = "marvell,odmi-controller";
> + interrupt-controller;
> + msi-controller;
> + marvell,odmi-frames = <4>;
> + reg = <0x300000 0x4000>,
> + <0x304000 0x4000>,
> + <0x308000 0x4000>,
> + <0x30C000 0x4000>;
> + marvell,spi-base = <128>, <136>, <144>, <152>;
> + };
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index 715923d..18bed3c 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -217,3 +217,7 @@ config IRQ_MXS
> def_bool y if MACH_ASM9260 || ARCH_MXS
> select IRQ_DOMAIN
> select STMP_DEVICE
> +
> +config MVEBU_ODMI
> + bool
> + select GENERIC_MSI_IRQ_DOMAIN
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 18caacb..29c388f 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -59,3 +59,4 @@ obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
> obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
> obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
> obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
> +obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
> diff --git a/drivers/irqchip/irq-mvebu-odmi.c b/drivers/irqchip/irq-mvebu-odmi.c
> new file mode 100644
> index 0000000..0017f05
> --- /dev/null
> +++ b/drivers/irqchip/irq-mvebu-odmi.c
> @@ -0,0 +1,248 @@
> +/*
> + * Copyright (C) 2016 Marvell
> + *
> + * Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#define pr_fmt(fmt) "GIC-ODMI: " fmt
> +
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +#define GICP_ODMIN_SET 0x40
> +#define GICP_ODMI_INT_NUM_SHIFT 12
> +#define GICP_ODMIN_GM_EP_R0 0x110
> +#define GICP_ODMIN_GM_EP_R1 0x114
> +#define GICP_ODMIN_GM_EA_R0 0x108
> +#define GICP_ODMIN_GM_EA_R1 0x118
> +
> +/*
> + * We don't support the group events, so we simply have 8 interrupts
> + * per frame.
> + */
> +#define NODMIS_PER_FRAME 8
> +#define NODMIS_SHIFT 3
> +#define NODMIS_MASK 7

All these values are directly related, so it would be nice if they would
be expressed in term of each other:

#define NODMIS_SHIFT 3
#define NODMIS_PER_FRAME (1 << NODMIS_SHIFT)
#define NODMIS_MASK (NODMIS_PER_FRAME - 1)


> +
> +struct odmi_data {
> + struct resource res;
> + void __iomem *base;
> + unsigned int spi_base;
> +};
> +
> +static struct odmi_data *odmis;
> +static unsigned long *odmis_bm;
> +static unsigned int odmis_count;
> +
> +/* Protects odmis_bm */
> +static DEFINE_SPINLOCK(odmis_bm_lock);
> +
> +static int odmi_set_affinity(struct irq_data *d,
> + const struct cpumask *mask, bool force)
> +{
> + int ret;
> +
> + ret = irq_chip_set_affinity_parent(d, mask, force);
> + if (ret == IRQ_SET_MASK_OK)
> + ret = IRQ_SET_MASK_OK_DONE;
> +
> + return ret;
> +}
> +
> +static void odmi_compose_msi_msg(struct irq_data *d, struct msi_msg *msg)
> +{
> + struct odmi_data *odmi;
> + phys_addr_t addr;
> + unsigned int odmin;
> +
> + if (WARN_ON(d->hwirq >= odmis_count * NODMIS_PER_FRAME))
> + return;
> +
> + odmi = &odmis[d->hwirq >> NODMIS_SHIFT];
> + odmin = d->hwirq & NODMIS_MASK;
> +
> + addr = odmi->res.start + GICP_ODMIN_SET;
> +
> + msg->address_hi = upper_32_bits(addr);
> + msg->address_lo = lower_32_bits(addr);
> + msg->data = odmin << GICP_ODMI_INT_NUM_SHIFT;
> +}
> +
> +static struct irq_chip odmi_irq_chip = {
> + .name = "ODMI",
> + .irq_mask = irq_chip_mask_parent,
> + .irq_unmask = irq_chip_unmask_parent,
> + .irq_eoi = irq_chip_eoi_parent,
> + .irq_set_affinity = odmi_set_affinity,
> + .irq_compose_msi_msg = odmi_compose_msi_msg,
> +};
> +
> +static int odmi_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> + unsigned int nr_irqs, void *args)
> +{
> + struct odmi_data *odmi = NULL;
> + struct irq_fwspec fwspec;
> + struct irq_data *d;
> + unsigned int hwirq, odmin;
> + int ret;
> +
> + spin_lock(&odmis_bm_lock);
> + hwirq = find_first_zero_bit(odmis_bm, NODMIS_PER_FRAME * odmis_count);
> + if (hwirq >= NODMIS_PER_FRAME * odmis_count) {
> + spin_unlock(&odmis_bm_lock);
> + return -ENOSPC;
> + }
> +
> + __set_bit(hwirq, odmis_bm);
> + spin_unlock(&odmis_bm_lock);
> +
> + odmi = &odmis[hwirq >> NODMIS_SHIFT];
> + odmin = hwirq & NODMIS_MASK;
> +
> + fwspec.fwnode = domain->parent->fwnode;
> + fwspec.param_count = 3;
> + fwspec.param[0] = GIC_SPI;
> + fwspec.param[1] = odmi->spi_base - 32 + odmin;
> + fwspec.param[2] = IRQ_TYPE_EDGE_RISING;
> +
> + ret = irq_domain_alloc_irqs_parent(domain, virq, 1, &fwspec);
> + if (ret) {
> + pr_err("Cannot allocate parent IRQ\n");
> + spin_lock(&odmis_bm_lock);
> + __clear_bit(odmin, odmis_bm);
> + spin_unlock(&odmis_bm_lock);
> + return ret;
> + }
> +
> + /* Configure the interrupt line to be edge */
> + d = irq_domain_get_irq_data(domain->parent, virq);
> + d->chip->irq_set_type(d, IRQ_TYPE_EDGE_RISING);
> +
> + irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
> + &odmi_irq_chip, NULL);
> +
> + return 0;
> +}
> +
> +static void odmi_irq_domain_free(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs)
> +{
> + struct irq_data *d = irq_domain_get_irq_data(domain, virq);
> +
> + if (d->hwirq >= odmis_count * NODMIS_PER_FRAME) {
> + pr_err("Failed to teardown msi. Invalid hwirq %lu\n", d->hwirq);
> + return;
> + }
> +
> + irq_domain_free_irqs_parent(domain, virq, nr_irqs);
> +
> + /* Actually free the MSI */
> + spin_lock(&odmis_bm_lock);
> + __clear_bit(d->hwirq, odmis_bm);
> + spin_unlock(&odmis_bm_lock);
> +}
> +
> +static const struct irq_domain_ops odmi_domain_ops = {
> + .alloc = odmi_irq_domain_alloc,
> + .free = odmi_irq_domain_free,
> +};
> +
> +static struct irq_chip odmi_msi_irq_chip = {
> + .name = "ODMI",
> +};
> +
> +static struct msi_domain_ops odmi_msi_ops = {
> +};
> +
> +static struct msi_domain_info odmi_msi_domain_info = {
> + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
> + .ops = &odmi_msi_ops,
> + .chip = &odmi_msi_irq_chip,
> +};
> +
> +static int __init mvebu_odmi_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + struct irq_domain *inner_domain, *plat_domain;
> + int ret, i;
> +
> + if (of_property_read_u32(node, "marvell,odmi-frames", &odmis_count))
> + return -EINVAL;
> +
> + odmis = kcalloc(odmis_count, sizeof(struct odmi_data), GFP_KERNEL);
> + if (!odmis)
> + return -ENOMEM;
> +
> + odmis_bm = kzalloc(odmis_count * NODMIS_PER_FRAME / BITS_PER_BYTE,
> + GFP_KERNEL);

Blah. this will allocate the exact number of bytes, which you will then
access as longs, touching memory that's not yours in the process (I've
been recently bitten and publicly shamed...).

Consider the following:

odmis_bm = kzalloc(BITS_TO_LONGS(odmis_count * NODMIS_PER_FRAME) *
sizeof(long), GFP_KERNEL);

> + if (!odmis_bm) {
> + ret = -ENOMEM;
> + goto err_alloc;
> + }
> +
> + for (i = 0; i < odmis_count; i++) {
> + struct odmi_data *odmi = &odmis[i];
> +
> + ret = of_address_to_resource(node, i, &odmi->res);
> + if (ret)
> + goto err_unmap;
> +
> + odmi->base = of_io_request_and_map(node, i, "odmi");
> + if (IS_ERR(odmi->base)) {
> + ret = PTR_ERR(odmi->base);
> + goto err_unmap;
> + }
> +
> + if (of_property_read_u32_index(node, "marvell,spi-base",
> + i, &odmi->spi_base)) {
> + ret = -EINVAL;
> + goto err_unmap;
> + }
> + }
> +
> + inner_domain = irq_domain_create_linear(of_node_to_fwnode(node),
> + odmis_count * NODMIS_PER_FRAME,
> + &odmi_domain_ops, NULL);
> + if (!inner_domain) {
> + ret = -ENOMEM;
> + goto err_unmap;
> + }
> +
> + inner_domain->parent = irq_find_host(parent);
> +
> + plat_domain = platform_msi_create_irq_domain(of_node_to_fwnode(node),
> + &odmi_msi_domain_info,
> + inner_domain);
> + if (!plat_domain) {
> + ret = -ENOMEM;
> + goto err_remove_inner;
> + }
> +
> + return 0;
> +
> +err_remove_inner:
> + irq_domain_remove(inner_domain);
> +err_unmap:
> + for (i = 0; i < odmis_count; i++) {
> + struct odmi_data *odmi = &odmis[i];
> +
> + if (odmi->base && !IS_ERR(odmi->base))
> + iounmap(odmis[i].base);
> + }
> + kfree(odmis_bm);
> +err_alloc:
> + kfree(odmis);
> + return ret;
> +}
> +
> +IRQCHIP_DECLARE(mvebu_odmi, "marvell,odmi-controller", mvebu_odmi_init);
>

Thanks,

M.
--
Jazz is not dead. It just smells funny...