[PATCH v2] tty: serial: 8250: add MOXA Smartio MUE boards support

From: Mathieu OTHACEHE
Date: Sat Feb 20 2016 - 06:00:52 EST


Add support for :

- CP-102E: 2 ports RS232 PCIE card
- CP-102EL: 2 ports RS232 PCIE card
- CP-132EL: 2 ports RS422/485 PCIE card
- CP-114EL: 4 ports RS232/422/485 PCIE card
- CP-104EL-A: 4 ports RS232 PCIE card
- CP-168EL-A: 8 ports RS232 PCIE card
- CP-118EL-A: 8 ports RS232/422/485 PCIE card
- CP-118E-A: 8 ports RS422/485 PCIE card
- CP-138E-A: 8 ports RS422/485 PCIE card
- CP-134EL-A: 4 ports RS422/485 PCIE card
- CP-116E-A (A): 8 ports RS232/422/485 PCIE card
- CP-116E-A (B): 8 ports RS232/422/485 PCIE card

This patch is based on information extracted from
vendor mxupcie driver available on MOXA website.

I was able to test it on a CP-168EL-A on PC.

Signed-off-by: Mathieu OTHACEHE <m.othacehe@xxxxxxxxx>
---

Hi,

Here is v2 of the driver, I moved driver code from 8250_pci.c to 8250_moxa.c
as suggested by Andy.

I also fixed other problems pointed out by Jiri and Andy.

Thanks,
Mathieu

Changelog:
V2:
* Move everything to 8250_moxa.c
* Use PCI_DEVICE macro
* Group driver_data by port number as this is the only singularity between boards.

drivers/tty/serial/8250/8250_moxa.c | 162 ++++++++++++++++++++++++++++++++++++
drivers/tty/serial/8250/Kconfig | 10 +++
drivers/tty/serial/8250/Makefile | 1 +
3 files changed, 173 insertions(+)
create mode 100644 drivers/tty/serial/8250/8250_moxa.c

diff --git a/drivers/tty/serial/8250/8250_moxa.c b/drivers/tty/serial/8250/8250_moxa.c
new file mode 100644
index 0000000..c88586b
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_moxa.c
@@ -0,0 +1,162 @@
+/*
+ * 8250_moxa.c - MOXA Smartio/Industio MUE multiport serial driver.
+ *
+ * Author: Mathieu OTHACEHE <m.othacehe@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "8250.h"
+
+#define PCI_DEVICE_ID_MOXA_CP102E 0x1024
+#define PCI_DEVICE_ID_MOXA_CP102EL 0x1025
+#define PCI_DEVICE_ID_MOXA_CP104EL_A 0x1045
+#define PCI_DEVICE_ID_MOXA_CP114EL 0x1144
+#define PCI_DEVICE_ID_MOXA_CP116E_A_A 0x1160
+#define PCI_DEVICE_ID_MOXA_CP116E_A_B 0x1161
+#define PCI_DEVICE_ID_MOXA_CP118EL_A 0x1182
+#define PCI_DEVICE_ID_MOXA_CP118E_A_I 0x1183
+#define PCI_DEVICE_ID_MOXA_CP132EL 0x1322
+#define PCI_DEVICE_ID_MOXA_CP134EL_A 0x1342
+#define PCI_DEVICE_ID_MOXA_CP138E_A 0x1381
+#define PCI_DEVICE_ID_MOXA_CP168EL_A 0x1683
+
+#define MOXA_BASE_BAUD 921600
+#define MOXA_UART_OFFSET 0x200
+
+struct moxa8250_board {
+ unsigned int num_ports;
+ int line[0];
+};
+
+enum {
+ moxa8250_2p = 0,
+ moxa8250_4p,
+ moxa8250_8p
+};
+
+static struct moxa8250_board moxa8250_boards[] = {
+ [moxa8250_2p] = { .num_ports = 2},
+ [moxa8250_4p] = { .num_ports = 4},
+ [moxa8250_8p] = { .num_ports = 8},
+};
+
+static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct uart_8250_port uart;
+ struct moxa8250_board *brd;
+ void __iomem *ioaddr;
+ int nr_ports, ret, i, offset;
+
+ brd = &moxa8250_boards[id->driver_data];
+ nr_ports = brd->num_ports;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ brd = devm_kzalloc(&pdev->dev, sizeof(struct moxa8250_board) +
+ sizeof(unsigned int) * nr_ports, GFP_KERNEL);
+ if (!brd)
+ return -ENOMEM;
+
+ memset(&uart, 0, sizeof(struct uart_8250_port));
+
+ uart.port.dev = &pdev->dev;
+ uart.port.irq = pdev->irq;
+ uart.port.private_data = brd;
+ uart.port.uartclk = MOXA_BASE_BAUD * 16;
+ uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+
+ ioaddr = pcim_iomap(pdev, 1, 0);
+
+ for (i = 0; i < nr_ports; i++) {
+
+ /*
+ * MOXA Smartio MUE boards with 4 ports have
+ * a different offset for port #3
+ */
+ if (nr_ports == 4 && i == 3)
+ offset = 7 * MOXA_UART_OFFSET;
+ else
+ offset = i * MOXA_UART_OFFSET;
+
+ uart.port.iotype = UPIO_MEM;
+ uart.port.iobase = 0;
+ uart.port.mapbase = pci_resource_start(pdev, 1) + offset;
+ uart.port.membase = ioaddr + offset;
+ uart.port.regshift = 0;
+
+ dev_dbg(&pdev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
+ uart.port.iobase, uart.port.irq, uart.port.iotype);
+
+ brd->line[i] = serial8250_register_8250_port(&uart);
+ if (brd->line[i] < 0) {
+ dev_err(&pdev->dev,
+ "Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+ uart.port.iobase, uart.port.irq,
+ uart.port.iotype, brd->line[i]);
+ break;
+ }
+ }
+
+ pci_set_drvdata(pdev, brd);
+ return 0;
+}
+
+static void moxa8250_remove(struct pci_dev *pdev)
+{
+ struct moxa8250_board *brd = pci_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < brd->num_ports; i++)
+ serial8250_unregister_port(brd->line[i]);
+}
+
+static const struct pci_device_id pci_ids[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102E),
+ .driver_data = moxa8250_2p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102EL),
+ .driver_data = moxa8250_2p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104EL_A),
+ .driver_data = moxa8250_4p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114EL),
+ .driver_data = moxa8250_4p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_A),
+ .driver_data = moxa8250_8p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP116E_A_B),
+ .driver_data = moxa8250_8p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118EL_A),
+ .driver_data = moxa8250_8p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118E_A_I),
+ .driver_data = moxa8250_8p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132EL),
+ .driver_data = moxa8250_2p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134EL_A),
+ .driver_data = moxa8250_4p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP138E_A),
+ .driver_data = moxa8250_8p},
+ {PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168EL_A),
+ .driver_data = moxa8250_8p},
+ {0}
+};
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver moxa8250_pci_driver = {
+ .name = "8250_moxa",
+ .id_table = pci_ids,
+ .probe = moxa8250_probe,
+ .remove = moxa8250_remove,
+};
+
+module_pci_driver(moxa8250_pci_driver);
+
+MODULE_AUTHOR("Mathieu OTHACEHE");
+MODULE_DESCRIPTION("MOXA SmartIO MUE driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 67ad6b0..349f571 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -402,6 +402,16 @@ config SERIAL_8250_MID
present on the UART found on Intel Medfield SOC and various other
Intel platforms.

+config SERIAL_8250_MOXA
+ tristate "MOXA SmartIO MUE support"
+ depends on SERIAL_8250 && PCI
+ help
+ Say Y here if you have a Moxa SmartIO MUE multiport serial card.
+ If unsure, say N.
+
+ This driver can also be built as a module. The module will be called
+ 8250_moxa. If you want to do that, say M here.
+
config SERIAL_OF_PLATFORM
tristate "Devicetree based probing for 8250 ports"
depends on SERIAL_8250 && OF
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 5c1869f..c9a2d6e 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o
obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o
obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o
+obj-$(CONFIG_SERIAL_8250_MOXA) += 8250_moxa.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += 8250_of.o

CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
--
2.7.0