[PATCH v4 0/4] Add Ethernet support on STM32F429

From: Alexandre TORGUE
Date: Fri Mar 04 2016 - 10:58:23 EST


STM32F429 Chip embeds a Synopsys 3.50a MAC IP.
This series:
-enhance current stmmac driver to control it (code already
available) and adds basic glue for STM32F429 chip.
-Enable basic Net config in kernel.

Note that DT patches are not present because STM32 pinctrl code is not
yet avalaible.

Changes since v3:
-Fix "tx-clk" and "rx-clk" as required clocks. Driver and bindings are
modified.

Changes since v2:
-Fix alphabetic order in Kconfig and Makefile.
-Improve code according to Joachim review.
-Binding: remove useless entry.

Changes since v1:
-Fix Kbuild issue in Kconfig.
-Remove init/exit callbacks. Suspend/Resume and remove driver is no more
driven in stmmac_pltfr but directly in dwmac-stm32 glue driver.
-Take into account Joachim review.

Regards.

Alexandre.

Alexandre TORGUE (4):
net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
Documentation: Bindings: Add STM32 DWMAC glue
net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP
ARM: STM32: Enable Ethernet in stm32_defconfig

.../devicetree/bindings/net/stm32-dwmac.txt | 35 ++++
arch/arm/configs/stm32_defconfig | 9 +
drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++
drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 193 +++++++++++++++++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 +
6 files changed, 251 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c

--
1.9.1