[PATCH v3 02/13] clk: sunxi: add ahb1 clock for A83T

From: Vishnu Patekar
Date: Sat Mar 05 2016 - 10:44:35 EST


AHB1 on A83T is similar to ahb1 on A31, except parents are different.
clock index 0b1x is PLL6.

Signed-off-by: Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>
Acked-by: Chen-Yu Tsai <wens@xxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
drivers/clk/sunxi/clk-sunxi.c | 76 +++++++++++++++++++++++
2 files changed, 77 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index c09f59b..2ee7841 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -29,6 +29,7 @@ Required properties:
"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
"allwinner,sun9i-a80-cpus-clk" - for the CPUS on A80
"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
+ "allwinner,sun8i-a83t-ahb1-clk" - for the AHB1 clock on A83T
"allwinner,sun8i-h3-ahb2-clk" - for the AHB2 clock on H3
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 99f60ef..0ae1f09 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -344,6 +344,67 @@ static void sun6i_ahb1_recalc(struct factors_request *req)
req->rate >>= req->p;
}

+#define SUN8I_A83T_AHB1_PARENT_PLL6 2
+/**
+ * sun8i_a83t_get_ahb_factors() - calculates m, p factors for AHB
+ * AHB rate is calculated as follows
+ * rate = parent_rate >> p
+ *
+ * if parent is pll6, then
+ * parent_rate = pll6 rate / (m + 1)
+ */
+
+static void sun8i_a83t_get_ahb1_factors(struct factors_request *req)
+{
+ u8 div, calcp, calcm = 1;
+
+ /*
+ * clock can only divide, so we will never be able to achieve
+ * frequencies higher than the parent frequency
+ */
+ if (req->parent_rate && req->rate > req->parent_rate)
+ req->rate = req->parent_rate;
+
+ div = DIV_ROUND_UP(req->parent_rate, req->rate);
+
+ /* calculate pre-divider if parent is pll6 */
+ if (req->parent_index >= SUN8I_A83T_AHB1_PARENT_PLL6) {
+ if (div < 4)
+ calcp = 0;
+ else if (div / 2 < 4)
+ calcp = 1;
+ else if (div / 4 < 4)
+ calcp = 2;
+ else
+ calcp = 3;
+
+ calcm = DIV_ROUND_UP(div, 1 << calcp);
+ } else {
+ calcp = __roundup_pow_of_two(div);
+ calcp = calcp > 3 ? 3 : calcp;
+}
+
+ req->rate = (req->parent_rate / calcm) >> calcp;
+ req->p = calcp;
+ req->m = calcm - 1;
+}
+
+/**
+* sun8i_a83t_ahb1_recalc() - calculates AHB clock rate from m, p factors and
+* parent index
+*/
+static void sun8i_a83t_ahb1_recalc(struct factors_request *req)
+{
+ req->rate = req->parent_rate;
+
+/* apply pre-divider first if parent is pll6 */
+ if (req->parent_index >= SUN6I_AHB1_PARENT_PLL6)
+ req->rate /= req->m + 1;
+
+ /* clk divider */
+ req->rate >>= req->p;
+}
+
/**
* sun4i_get_apb1_factors() - calculates m, p factors for APB1
* APB1 rate is calculated as follows
@@ -555,6 +616,14 @@ static const struct factors_data sun6i_ahb1_data __initconst = {
.recalc = sun6i_ahb1_recalc,
};

+static const struct factors_data sun8i_a83t_ahb1_data __initconst = {
+ .mux = 12,
+ .muxmask = BIT(1) | BIT(0),
+ .table = &sun6i_ahb1_config,
+ .getter = sun8i_a83t_get_ahb1_factors,
+ .recalc = sun8i_a83t_ahb1_recalc,
+};
+
static const struct factors_data sun4i_apb1_data __initconst = {
.mux = 24,
.muxmask = BIT(1) | BIT(0),
@@ -627,6 +696,13 @@ static void __init sun6i_ahb1_clk_setup(struct device_node *node)
CLK_OF_DECLARE(sun6i_a31_ahb1, "allwinner,sun6i-a31-ahb1-clk",
sun6i_ahb1_clk_setup);

+static void __init sun8i_a83t_ahb1_clk_setup(struct device_node *node)
+{
+ sunxi_factors_clk_setup(node, &sun8i_a83t_ahb1_data);
+}
+CLK_OF_DECLARE(sun8i_a83t_ahb1, "allwinner,sun8i-a83t-ahb1-clk",
+ sun8i_a83t_ahb1_clk_setup);
+
static void __init sun4i_apb1_clk_setup(struct device_node *node)
{
sunxi_factors_clk_setup(node, &sun4i_apb1_data);
--
1.9.1