[PATCH 4.2.y-ckt 267/273] net: phy: bcm7xxx: Fix bcm7xxx_config_init() check

From: Kamal Mostafa
Date: Mon Mar 07 2016 - 18:01:53 EST


4.2.8-ckt5 -stable review patch. If anyone has any objections, please let me know.

---8<------------------------------------------------------------

From: Florian Fainelli <f.fainelli@xxxxxxxxx>

commit 258bf44364263cb6391f35ebaca3c2366655bded upstream.

Since we were wrongly advertising gigabit features for these 10/100 only
Ethernet PHYs, bcm7xxx_config_init() which is supposed to apply workaround
would have not run since the check would be true, now that we have fixed the
PHY features, remove that check since it has no reasoning to be there anymore.

Fixes: e18556ee3bd83 ("net: phy: bcm7xxx: do not use PHY_BRCM_100MBPS_WAR")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Kamal Mostafa <kamal@xxxxxxxxxxxxx>
---
drivers/net/phy/bcm7xxx.c | 4 ----
1 file changed, 4 deletions(-)

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 24e2071..38b57f6 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -324,10 +324,6 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
phy_read(phydev, MII_BCM7XXX_AUX_MODE);

- /* Workaround only required for 100Mbits/sec capable PHYs */
- if (phydev->supported & PHY_GBIT_FEATURES)
- return 0;
-
/* set shadow mode 2 */
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
--
2.7.0