Re: [PATCH v5 2/3] mtd: nand: Add support for Arasan Nand Flash Controller

From: punnaiah choudary kalluri
Date: Mon Mar 07 2016 - 21:47:30 EST


HI Brian,

On Tue, Mar 8, 2016 at 5:37 AM, Brian Norris
<computersforpeace@xxxxxxxxx> wrote:
> + Boris
>
> Punnaiah,
>
> Can you fix the threading on your mail client? Your patch series does
> not appear as a thread, because you didn't get the mail headers right
> (References and In-Reply-To). If you're having trouble, try git-send-email.

Sure and thanks for the review. I will address the below commnets in v6 and
release the patches for review soon.

Regards,
Punnaiah.

>
> On Sat, Nov 21, 2015 at 08:09:48PM +0530, Punnaiah Choudary Kalluri wrote:
>> Added the basic driver for Arasan Nand Flash Controller used in
>> Zynq UltraScale+ MPSoC. It supports only Hw Ecc and upto 24bit
>> correction.
>>
>> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
>> ---
>> Changes in v5:
>> - Renamed the driver filei as arasan_nand.c
>> - Fixed all comments relaqted coding style
>> - Fixed comments related to propagating the errors
>> - Modified the anfc_write_page_hwecc as per the write_page
>> prototype
>> Changes in v4:
>> - Added support for onfi timing mode configuration
>> - Added clock supppport
>> - Added support for multiple chipselects
>> Changes in v3:
>> - Removed unused variables
>> - Avoided busy loop and used jifies based implementation
>> - Fixed compiler warnings "right shift count >= width of type"
>> - Removed unneeded codei and improved error reporting
>> - Added onfi version check to ensure reading the valid address cycles
>> Changes in v2:
>> - Added missing of.h to avoid kbuild system report error
>> ---
>> drivers/mtd/nand/Kconfig | 6 +
>> drivers/mtd/nand/Makefile | 1 +
>> drivers/mtd/nand/arasan_nand.c | 1010 ++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 1017 insertions(+)
>> create mode 100644 drivers/mtd/nand/arasan_nand.c
>>
>> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
>> index 2896640..9c620fb 100644
>> --- a/drivers/mtd/nand/Kconfig
>> +++ b/drivers/mtd/nand/Kconfig
>> @@ -546,4 +546,10 @@ config MTD_NAND_HISI504
>> help
>> Enables support for NAND controller on Hisilicon SoC Hip04.
>>
>> +config MTD_NAND_ARASAN
>
> I think you have some missing dependencies here, like HAS_IOMEM.
>
>> + tristate "Support for Arasan Nand Flash controller"
>> + help
>> + Enables the driver for the Arasan Nand Flash controller on
>> + Zynq UltraScale+ MPSoC.
>> +
>> endif # MTD_NAND
>> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
>> index 2c7f014..3b993cb 100644
>> --- a/drivers/mtd/nand/Makefile
>> +++ b/drivers/mtd/nand/Makefile
>> @@ -55,5 +55,6 @@ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
>> obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
>> obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
>> obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
>> +obj-$(CONFIG_MTD_NAND_ARASAN) += arasan_nand.o
>>
>> nand-objs := nand_base.o nand_bbt.o nand_timings.o
>> diff --git a/drivers/mtd/nand/arasan_nand.c b/drivers/mtd/nand/arasan_nand.c
>> new file mode 100644
>> index 0000000..e882e63
>> --- /dev/null
>> +++ b/drivers/mtd/nand/arasan_nand.c
>> @@ -0,0 +1,1010 @@
>> +/*
>> + * Arasan Nand Flash Controller Driver
>> + *
>> + * Copyright (C) 2014 - 2015 Xilinx, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it under
>> + * the terms of the GNU General Public License version 2 as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + */
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io-64-nonatomic-lo-hi.h>
>> +#include <linux/module.h>
>> +#include <linux/mtd/mtd.h>
>> +#include <linux/mtd/nand.h>
>> +#include <linux/mtd/partitions.h>
>> +#include <linux/of.h>
>> +#include <linux/of_mtd.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define DRIVER_NAME "arasan_nand"
>> +#define EVNT_TIMEOUT 1000
>> +#define STATUS_TIMEOUT 2000
>> +
>> +#define PKT_OFST 0x00
>> +#define MEM_ADDR1_OFST 0x04
>> +#define MEM_ADDR2_OFST 0x08
>> +#define CMD_OFST 0x0C
>> +#define PROG_OFST 0x10
>> +#define INTR_STS_EN_OFST 0x14
>> +#define INTR_SIG_EN_OFST 0x18
>> +#define INTR_STS_OFST 0x1C
>> +#define READY_STS_OFST 0x20
>> +#define DMA_ADDR1_OFST 0x24
>> +#define FLASH_STS_OFST 0x28
>> +#define DATA_PORT_OFST 0x30
>> +#define ECC_OFST 0x34
>> +#define ECC_ERR_CNT_OFST 0x38
>> +#define ECC_SPR_CMD_OFST 0x3C
>> +#define ECC_ERR_CNT_1BIT_OFST 0x40
>> +#define ECC_ERR_CNT_2BIT_OFST 0x44
>> +#define DMA_ADDR0_OFST 0x50
>> +#define DATA_INTERFACE_REG 0x6C
>> +
>> +#define PKT_CNT_SHIFT 12
>> +
>> +#define ECC_ENABLE BIT(31)
>> +#define DMA_EN_MASK GENMASK(27, 26)
>> +#define DMA_ENABLE 0x2
>> +#define DMA_EN_SHIFT 26
>> +#define REG_PAGE_SIZE_MASK GENMASK(25, 23)
>> +#define REG_PAGE_SIZE_SHIFT 23
>> +#define REG_PAGE_SIZE_512 0
>> +#define REG_PAGE_SIZE_1K 5
>> +#define REG_PAGE_SIZE_2K 1
>> +#define REG_PAGE_SIZE_4K 2
>> +#define REG_PAGE_SIZE_8K 3
>> +#define REG_PAGE_SIZE_16K 4
>> +#define CMD2_SHIFT 8
>> +#define ADDR_CYCLES_SHIFT 28
>> +
>> +#define XFER_COMPLETE BIT(2)
>> +#define READ_READY BIT(1)
>> +#define WRITE_READY BIT(0)
>> +#define MBIT_ERROR BIT(3)
>> +#define ERR_INTRPT BIT(4)
>> +
>> +#define PROG_PGRD BIT(0)
>> +#define PROG_ERASE BIT(2)
>> +#define PROG_STATUS BIT(3)
>> +#define PROG_PGPROG BIT(4)
>> +#define PROG_RDID BIT(6)
>> +#define PROG_RDPARAM BIT(7)
>> +#define PROG_RST BIT(8)
>> +#define PROG_GET_FEATURE BIT(9)
>> +#define PROG_SET_FEATURE BIT(10)
>> +
>> +#define ONFI_STATUS_FAIL BIT(0)
>> +#define ONFI_STATUS_READY BIT(6)
>> +
>> +#define PG_ADDR_SHIFT 16
>> +#define BCH_MODE_SHIFT 25
>> +#define BCH_EN_SHIFT 27
>> +#define ECC_SIZE_SHIFT 16
>> +
>> +#define MEM_ADDR_MASK GENMASK(7, 0)
>> +#define BCH_MODE_MASK GENMASK(27, 25)
>> +
>> +#define CS_MASK GENMASK(31, 30)
>> +#define CS_SHIFT 30
>> +
>> +#define PAGE_ERR_CNT_MASK GENMASK(16, 8)
>> +#define PKT_ERR_CNT_MASK GENMASK(7, 0)
>> +
>> +#define NVDDR_MODE BIT(9)
>> +#define NVDDR_TIMING_MODE_SHIFT 3
>> +
>> +#define ONFI_ID_LEN 8
>> +#define TEMP_BUF_SIZE 512
>> +#define NVDDR_MODE_PACKET_SIZE 8
>> +#define SDR_MODE_PACKET_SIZE 4
>> +
>> +/**
>> + * struct anfc_ecc_matrix - Defines ecc information storage format
>> + * @pagesize: Page size in bytes.
>> + * @codeword_size: Code word size information.
>> + * @eccbits: Number of ecc bits.
>> + * @bch: Bch / Hamming mode enable/disable.
>> + * @eccsize: Ecc size information.
>> + */
>> +struct anfc_ecc_matrix {
>> + u32 pagesize;
>> + u32 codeword_size;
>> + u8 eccbits;
>> + u8 bch;
>> + u16 eccsize;
>> +};
>> +
>> +static const struct anfc_ecc_matrix ecc_matrix[] = {
>> + {512, 512, 1, 0, 0x3},
>> + {512, 512, 4, 1, 0x7},
>> + {512, 512, 8, 1, 0xD},
>> + /* 2K byte page */
>> + {2048, 512, 1, 0, 0xC},
>> + {2048, 512, 4, 1, 0x1A},
>> + {2048, 512, 8, 1, 0x34},
>> + {2048, 512, 12, 1, 0x4E},
>> + {2048, 1024, 24, 1, 0x54},
>> + /* 4K byte page */
>> + {4096, 512, 1, 0, 0x18},
>> + {4096, 512, 4, 1, 0x34},
>> + {4096, 512, 8, 1, 0x68},
>> + {4096, 512, 12, 1, 0x9C},
>> + {4096, 1024, 4, 1, 0xA8},
>> + /* 8K byte page */
>> + {8192, 512, 1, 0, 0x30},
>> + {8192, 512, 4, 1, 0x68},
>> + {8192, 512, 8, 1, 0xD0},
>> + {8192, 512, 12, 1, 0x138},
>> + {8192, 1024, 24, 1, 0x150},
>> + /* 16K byte page */
>> + {16384, 512, 1, 0, 0x60},
>> + {16384, 512, 4, 1, 0xD0},
>> + {16384, 512, 8, 1, 0x1A0},
>> + {16384, 512, 12, 1, 0x270},
>> + {16384, 1024, 24, 1, 0x2A0}
>> +};
>> +
>> +/**
>> + * struct anfc - Defines the Arasan NAND flash driver instance
>> + * @chip: NAND chip information structure.
>> + * @mtd: MTD information structure.
>> + * @dev: Pointer to the device structure.
>> + * @base: Virtual address of the NAND flash device.
>> + * @curr_cmd: Current command issued.
>> + * @clk_sys: Pointer to the system clock.
>> + * @clk_flash: Pointer to the flash clock.
>> + * @dma: Dma enable/disable.
>> + * @bch: Bch / Hamming mode enable/disable.
>> + * @err: Error identifier.
>> + * @iswriteoob: Identifies if oob write operation is required.
>> + * @buf: Buffer used for read/write byte operations.
>> + * @raddr_cycles: Row address cycle information.
>> + * @caddr_cycles: Column address cycle information.
>> + * @irq: irq number
>> + * @pktsize: Packet size for read / write operation.
>> + * @bufshift: Variable used for indexing buffer operation
>> + * @rdintrmask: Interrupt mask value for read operation.
>> + * @num_cs: Number of chip selects in use.
>> + * @spktsize: Packet size in ddr mode for status operation.
>> + * @bufrdy: Completion event for buffer ready.
>> + * @xfercomp: Completion event for transfer complete.
>> + * @ecclayout: Ecc layout object
>> + */
>> +struct anfc {
>> + struct nand_chip chip;
>> + struct mtd_info mtd;
>> + struct device *dev;
>> +
>> + void __iomem *base;
>> + int curr_cmd;
>> + struct clk *clk_sys;
>> + struct clk *clk_flash;
>> +
>> + bool dma;
>> + bool bch;
>> + bool err;
>> + bool iswriteoob;
>> +
>> + u8 buf[TEMP_BUF_SIZE];
>> +
>> + u16 raddr_cycles;
>> + u16 caddr_cycles;
>> +
>> + u32 irq;
>> + u32 pktsize;
>> + u32 bufshift;
>> + u32 rdintrmask;
>> + u32 num_cs;
>> + u32 spktsize;
>> +
>> + struct completion bufrdy;
>> + struct completion xfercomp;
>> + struct nand_ecclayout ecclayout;
>> +};
>> +
>> +static inline struct anfc *to_anfc(struct mtd_info *mtd)
>> +{
>> + return container_of(mtd, struct anfc, mtd);
>> +}
>> +
>> +static u8 anfc_page(u32 pagesize)
>> +{
>> + switch (pagesize) {
>> + case 512:
>> + return REG_PAGE_SIZE_512;
>> + case 1024:
>> + return REG_PAGE_SIZE_1K;
>> + case 2048:
>> + return REG_PAGE_SIZE_2K;
>> + case 4096:
>> + return REG_PAGE_SIZE_4K;
>> + case 8192:
>> + return REG_PAGE_SIZE_8K;
>> + case 16384:
>> + return REG_PAGE_SIZE_16K;
>> + default:
>> + break;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static inline void anfc_enable_intrs(struct anfc *nfc, u32 val)
>> +{
>> + writel(val, nfc->base + INTR_STS_EN_OFST);
>> + writel(val, nfc->base + INTR_SIG_EN_OFST);
>> +}
>> +
>> +static int anfc_wait_for_event(struct anfc *nfc, u32 event)
>> +{
>> + struct completion *comp;
>> +
>> + if (event == XFER_COMPLETE)
>> + comp = &nfc->xfercomp;
>> + else
>> + comp = &nfc->bufrdy;
>> +
>> + return wait_for_completion_timeout(comp,
>> + msecs_to_jiffies(EVNT_TIMEOUT));
>> +}
>> +
>> +static inline void anfc_setpktszcnt(struct anfc *nfc, u32 pktsize,
>> + u32 pktcount)
>> +{
>> + writel(pktsize | (pktcount << PKT_CNT_SHIFT), nfc->base + PKT_OFST);
>> +}
>> +
>> +static inline void anfc_set_eccsparecmd(struct anfc *nfc, u8 cmd1, u8 cmd2)
>> +{
>> + writel(cmd1 | (cmd2 << CMD2_SHIFT) |
>> + (nfc->caddr_cycles << ADDR_CYCLES_SHIFT),
>> + nfc->base + ECC_SPR_CMD_OFST);
>> +}
>> +
>> +static void anfc_setpagecoladdr(struct anfc *nfc, u32 page, u16 col)
>> +{
>> + u32 val;
>> +
>> + writel(col | (page << PG_ADDR_SHIFT), nfc->base + MEM_ADDR1_OFST);
>> +
>> + val = readl(nfc->base + MEM_ADDR2_OFST);
>> + val = (val & ~MEM_ADDR_MASK) |
>> + ((page >> PG_ADDR_SHIFT) & MEM_ADDR_MASK);
>> + writel(val, nfc->base + MEM_ADDR2_OFST);
>> +}
>> +
>> +static void anfc_prepare_cmd(struct anfc *nfc, u8 cmd1, u8 cmd2,
>> + u8 dmamode, u32 pagesize, u8 addrcycles)
>> +{
>> + u32 regval;
>> +
>> + regval = cmd1 | (cmd2 << CMD2_SHIFT);
>> + if (dmamode && nfc->dma)
>> + regval |= DMA_ENABLE << DMA_EN_SHIFT;
>> + if (addrcycles)
>> + regval |= addrcycles << ADDR_CYCLES_SHIFT;
>> + if (pagesize)
>> + regval |= anfc_page(pagesize) << REG_PAGE_SIZE_SHIFT;
>> + writel(regval, nfc->base + CMD_OFST);
>> +}
>> +
>> +static int anfc_device_ready(struct mtd_info *mtd,
>> + struct nand_chip *chip)
>> +{
>> + u8 status;
>> + unsigned long timeout = jiffies + STATUS_TIMEOUT;
>> + struct anfc *nfc = to_anfc(mtd);
>> +
>> + do {
>> + chip->cmdfunc(mtd, NAND_CMD_STATUS, 0, 0);
>> + status = chip->read_byte(mtd);
>> + if (status & ONFI_STATUS_READY)
>> + break;
>> + cpu_relax();
>> + } while (!time_after_eq(jiffies, timeout));
>> +
>> + if (status & ONFI_STATUS_FAIL)
>> + return NAND_STATUS_FAIL;
>> +
>> + if (time_after_eq(jiffies, timeout)) {
>> + dev_err(nfc->dev, "%s timed out\n", __func__);
>> + return -ETIMEDOUT;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int anfc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
>> + int page)
>> +{
>> + struct anfc *nfc = to_anfc(mtd);
>> +
>> + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
>> + if (nfc->dma)
>> + nfc->rdintrmask = XFER_COMPLETE;
>> + else
>> + nfc->rdintrmask = READ_READY;
>> + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
>> +
>> + return 0;
>> +}
>> +
>> +static int anfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
>> + int page)
>> +{
>> + struct anfc *nfc = to_anfc(mtd);
>> +
>> + nfc->iswriteoob = true;
>> + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
>> + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
>> + nfc->iswriteoob = false;
>> +
>> + return 0;
>> +}
>> +
>> +static void anfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
>> +{
>> + u32 pktcount, pktsize;
>> + unsigned int buf_rd_cnt = 0;
>> + u32 *bufptr = (u32 *)buf;
>> + struct anfc *nfc = to_anfc(mtd);
>> + dma_addr_t paddr;
>> +
>> + if (nfc->curr_cmd == NAND_CMD_READ0) {
>> + pktsize = nfc->pktsize;
>> + pktcount = DIV_ROUND_UP(mtd->writesize, pktsize);
>> + } else {
>> + pktsize = len;
>> + pktcount = 1;
>> + }
>> +
>> + anfc_setpktszcnt(nfc, pktsize, pktcount);
>> +
>> + if (nfc->dma) {
>> + paddr = dma_map_single(nfc->dev, buf, len, DMA_FROM_DEVICE);
>> + if (dma_mapping_error(nfc->dev, paddr)) {
>> + dev_err(nfc->dev, "Read buffer mapping error");
>> + return;
>> + }
>> + lo_hi_writeq(paddr, nfc->base + DMA_ADDR0_OFST);
>> + anfc_enable_intrs(nfc, nfc->rdintrmask);
>> + writel(PROG_PGRD, nfc->base + PROG_OFST);
>> + anfc_wait_for_event(nfc, XFER_COMPLETE);
>> + dma_unmap_single(nfc->dev, paddr, len, DMA_FROM_DEVICE);
>> + return;
>> + }
>> +
>> + anfc_enable_intrs(nfc, nfc->rdintrmask);
>> + writel(PROG_PGRD, nfc->base + PROG_OFST);
>> +
>> + while (buf_rd_cnt < pktcount) {
>> +
>> + anfc_wait_for_event(nfc, READ_READY);
>> + buf_rd_cnt++;
>> +
>> + if (buf_rd_cnt == pktcount)
>> + anfc_enable_intrs(nfc, XFER_COMPLETE);
>> +
>> + readsl(nfc->base + DATA_PORT_OFST, bufptr, pktsize/4);
>> + bufptr += pktsize/4;
>> +
>> + if (buf_rd_cnt < pktcount)
>> + anfc_enable_intrs(nfc, nfc->rdintrmask);
>> + }
>> +
>> + anfc_wait_for_event(nfc, XFER_COMPLETE);
>> +}
>> +
>> +static void anfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
>> +{
>> + u32 pktcount, pktsize;
>> + unsigned int buf_wr_cnt = 0;
>> + u32 *bufptr = (u32 *)buf;
>> + struct anfc *nfc = to_anfc(mtd);
>> + dma_addr_t paddr;
>> +
>> + if (nfc->iswriteoob) {
>> + pktsize = len;
>> + pktcount = 1;
>> + } else {
>> + pktsize = nfc->pktsize;
>> + pktcount = mtd->writesize / pktsize;
>> + }
>> +
>> + anfc_setpktszcnt(nfc, pktsize, pktcount);
>> +
>> + if (nfc->dma) {
>> + paddr = dma_map_single(nfc->dev, (void *)buf, len,
>> + DMA_TO_DEVICE);
>> + if (dma_mapping_error(nfc->dev, paddr)) {
>> + dev_err(nfc->dev, "Write buffer mapping error");
>> + return;
>> + }
>> + lo_hi_writeq(paddr, nfc->base + DMA_ADDR0_OFST);
>> + anfc_enable_intrs(nfc, XFER_COMPLETE);
>> + writel(PROG_PGPROG, nfc->base + PROG_OFST);
>> + anfc_wait_for_event(nfc, XFER_COMPLETE);
>> + dma_unmap_single(nfc->dev, paddr, len, DMA_TO_DEVICE);
>> + return;
>> + }
>> +
>> + anfc_enable_intrs(nfc, WRITE_READY);
>> + writel(PROG_PGPROG, nfc->base + PROG_OFST);
>> +
>> + while (buf_wr_cnt < pktcount) {
>> + anfc_wait_for_event(nfc, WRITE_READY);
>> +
>> + buf_wr_cnt++;
>> + if (buf_wr_cnt == pktcount)
>> + anfc_enable_intrs(nfc, XFER_COMPLETE);
>> +
>> + writesl(nfc->base + DATA_PORT_OFST, bufptr, pktsize/4);
>> + bufptr += pktsize/4;
>> +
>> + if (buf_wr_cnt < pktcount)
>> + anfc_enable_intrs(nfc, WRITE_READY);
>> + }
>> +
>> + anfc_wait_for_event(nfc, XFER_COMPLETE);
>> +}
>> +
>> +static int anfc_read_page_hwecc(struct mtd_info *mtd,
>> + struct nand_chip *chip, uint8_t *buf,
>> + int oob_required, int page)
>> +{
>> + u32 val;
>> + struct anfc *nfc = to_anfc(mtd);
>> +
>> + anfc_set_eccsparecmd(nfc, NAND_CMD_RNDOUT, NAND_CMD_RNDOUTSTART);
>> +
>> + val = readl(nfc->base + CMD_OFST);
>> + val = val | ECC_ENABLE;
>> + writel(val, nfc->base + CMD_OFST);
>> +
>> + if (nfc->dma)
>> + nfc->rdintrmask = XFER_COMPLETE;
>> + else
>> + nfc->rdintrmask = READ_READY;
>> +
>> + if (!nfc->bch)
>> + nfc->rdintrmask = MBIT_ERROR;
>> +
>> + chip->read_buf(mtd, buf, mtd->writesize);
>> +
>> + val = readl(nfc->base + ECC_ERR_CNT_OFST);
>> + if (nfc->bch) {
>> + mtd->ecc_stats.corrected += val & PAGE_ERR_CNT_MASK;
>> + } else {
>> + val = readl(nfc->base + ECC_ERR_CNT_1BIT_OFST);
>> + mtd->ecc_stats.corrected += val;
>> + val = readl(nfc->base + ECC_ERR_CNT_2BIT_OFST);
>> + mtd->ecc_stats.failed += val;
>> + /* Clear ecc error count register 1Bit, 2Bit */
>> + writel(0x0, nfc->base + ECC_ERR_CNT_1BIT_OFST);
>> + writel(0x0, nfc->base + ECC_ERR_CNT_2BIT_OFST);
>> + }
>> + nfc->err = false;
>> +
>> + if (oob_required)
>> + chip->ecc.read_oob(mtd, chip, page);
>> +
>> + return 0;
>> +}
>> +
>> +static int anfc_write_page_hwecc(struct mtd_info *mtd,
>> + struct nand_chip *chip, const uint8_t *buf,
>> + int oob_required, int page)
>> +{
>> + u32 val;
>> + unsigned int i;
>> + struct anfc *nfc = to_anfc(mtd);
>> + uint8_t *ecc_calc = chip->buffers->ecccalc;
>> + uint32_t *eccpos = chip->ecc.layout->eccpos;
>> +
>> + anfc_set_eccsparecmd(nfc, NAND_CMD_RNDIN, 0);
>> +
>> + val = readl(nfc->base + CMD_OFST);
>> + val = val | ECC_ENABLE;
>> + writel(val, nfc->base + CMD_OFST);
>> +
>> + chip->write_buf(mtd, buf, mtd->writesize);
>> +
>> + if (oob_required) {
>> + anfc_device_ready(mtd, chip);
>> + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
>> + if (nfc->dma)
>> + nfc->rdintrmask = XFER_COMPLETE;
>> + else
>> + nfc->rdintrmask = READ_READY;
>> + chip->read_buf(mtd, ecc_calc, mtd->oobsize);
>> + for (i = 0; i < chip->ecc.total; i++)
>> + chip->oob_poi[eccpos[i]] = ecc_calc[eccpos[i]];
>> + chip->ecc.write_oob(mtd, chip, page);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static u8 anfc_read_byte(struct mtd_info *mtd)
>> +{
>> + struct anfc *nfc = to_anfc(mtd);
>> +
>> + return nfc->buf[nfc->bufshift++];
>> +}
>> +
>> +static void anfc_writefifo(struct anfc *nfc, u32 prog, u32 size, u8 *buf)
>> +{
>> + u32 *bufptr = (u32 *)buf;
>> +
>> + anfc_enable_intrs(nfc, WRITE_READY);
>> +
>> + writel(prog, nfc->base + PROG_OFST);
>> + anfc_wait_for_event(nfc, WRITE_READY);
>> +
>> + anfc_enable_intrs(nfc, XFER_COMPLETE);
>> + writesl(nfc->base + DATA_PORT_OFST, bufptr, size/4);
>> + anfc_wait_for_event(nfc, XFER_COMPLETE);
>> +}
>> +
>> +static void anfc_readfifo(struct anfc *nfc, u32 prog, u32 size)
>> +{
>> + u32 *bufptr = (u32 *)nfc->buf;
>> +
>> + anfc_enable_intrs(nfc, READ_READY);
>> +
>> + writel(prog, nfc->base + PROG_OFST);
>> + anfc_wait_for_event(nfc, READ_READY);
>> +
>> + anfc_enable_intrs(nfc, XFER_COMPLETE);
>> + readsl(nfc->base + DATA_PORT_OFST, bufptr, size/4);
>> + anfc_wait_for_event(nfc, XFER_COMPLETE);
>> +}
>> +
>> +static int anfc_ecc_init(struct mtd_info *mtd,
>> + struct nand_ecc_ctrl *ecc)
>> +{
>> + u32 ecc_addr, regval;
>> + unsigned int bchmode = 0, i, oob_index;
>> + struct nand_chip *nand_chip = mtd->priv;
>> + struct anfc *nfc = to_anfc(mtd);
>> + int found = -1;
>> +
>> + nand_chip->ecc.mode = NAND_ECC_HW;
>> + nand_chip->ecc.read_page = anfc_read_page_hwecc;
>> + nand_chip->ecc.write_page = anfc_write_page_hwecc;
>> + nand_chip->ecc.write_oob = anfc_write_oob;
>> + nand_chip->ecc.read_oob = anfc_read_oob;
>> +
>> + for (i = 0; i < ARRAY_SIZE(ecc_matrix); i++) {
>> + if ((ecc_matrix[i].pagesize == mtd->writesize) &&
>> + (ecc_matrix[i].codeword_size >= nand_chip->ecc_step_ds)) {
>> + found = i;
>> + if (ecc_matrix[i].eccbits >= nand_chip->ecc_strength_ds)
>> + break;
>> + }
>> + }
>> +
>> + if (found < 0) {
>> + dev_err(nfc->dev, "ECC scheme not supported");
>> + return 1;
>> + }
>> + if (ecc_matrix[found].bch) {
>> + switch (ecc_matrix[found].eccbits) {
>> + case 12:
>> + bchmode = 0x1;
>> + break;
>> + case 8:
>> + bchmode = 0x2;
>> + break;
>> + case 4:
>> + bchmode = 0x3;
>> + break;
>> + case 24:
>> + bchmode = 0x4;
>> + break;
>> + default:
>> + bchmode = 0x0;
>> + }
>> + }
>> +
>> + nand_chip->ecc.strength = ecc_matrix[found].eccbits;
>> + nand_chip->ecc.size = ecc_matrix[found].codeword_size;
>> + nand_chip->ecc.steps = ecc_matrix[found].pagesize /
>> + ecc_matrix[found].codeword_size;
>> + nand_chip->ecc.bytes = ecc_matrix[found].eccsize /
>> + nand_chip->ecc.steps;
>> + nfc->ecclayout.eccbytes = ecc_matrix[found].eccsize;
>> + nfc->bch = ecc_matrix[found].bch;
>> + oob_index = mtd->oobsize - nfc->ecclayout.eccbytes;
>> + ecc_addr = mtd->writesize + oob_index;
>> +
>> + for (i = 0; i < nand_chip->ecc.size; i++)
>> + nfc->ecclayout.eccpos[i] = oob_index + i;
>> +
>> + nfc->ecclayout.oobfree->offset = 2;
>> + nfc->ecclayout.oobfree->length = oob_index -
>> + nfc->ecclayout.oobfree->offset;
>> +
>> + nand_chip->ecc.layout = &nfc->ecclayout;
>
> FYI, we're deprecating this usage of ecclayout. You might take a look at Boris'
> latest (which we'll probably merge very soon):
>
> http://lists.infradead.org/pipermail/linux-mtd/2016-March/065925.html
>
>> + regval = ecc_addr | (ecc_matrix[found].eccsize << ECC_SIZE_SHIFT) |
>> + (ecc_matrix[found].bch << BCH_EN_SHIFT);
>> + writel(regval, nfc->base + ECC_OFST);
>> +
>> + regval = readl(nfc->base + MEM_ADDR2_OFST);
>> + regval = (regval & ~(BCH_MODE_MASK)) | (bchmode << BCH_MODE_SHIFT);
>> + writel(regval, nfc->base + MEM_ADDR2_OFST);
>> +
>> + if (nand_chip->ecc_step_ds >= 1024)
>> + nfc->pktsize = 1024;
>> + else
>> + nfc->pktsize = 512;
>> +
>> + return 0;
>> +}
>> +
>> +static void anfc_cmd_function(struct mtd_info *mtd,
>> + unsigned int cmd, int column, int page_addr)
>> +{
>> + struct anfc *nfc = to_anfc(mtd);
>> + bool wait = false, read = false;
>> + u32 addrcycles, prog;
>> + u32 *bufptr = (u32 *)nfc->buf;
>> +
>> + nfc->bufshift = 0;
>> + nfc->curr_cmd = cmd;
>> +
>> + if (page_addr == -1)
>> + page_addr = 0;
>> + if (column == -1)
>> + column = 0;
>> +
>> + switch (cmd) {
>> + case NAND_CMD_RESET:
>> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0);
>> + prog = PROG_RST;
>> + wait = true;
>> + break;
>> + case NAND_CMD_SEQIN:
>> + addrcycles = nfc->raddr_cycles + nfc->caddr_cycles;
>> + anfc_prepare_cmd(nfc, cmd, NAND_CMD_PAGEPROG, 1,
>> + mtd->writesize, addrcycles);
>> + anfc_setpagecoladdr(nfc, page_addr, column);
>> + break;
>> + case NAND_CMD_READOOB:
>> + column += mtd->writesize;
>> + case NAND_CMD_READ0:
>> + case NAND_CMD_READ1:
>> + addrcycles = nfc->raddr_cycles + nfc->caddr_cycles;
>> + anfc_prepare_cmd(nfc, NAND_CMD_READ0, NAND_CMD_READSTART, 1,
>> + mtd->writesize, addrcycles);
>> + anfc_setpagecoladdr(nfc, page_addr, column);
>> + break;
>> + case NAND_CMD_RNDOUT:
>> + anfc_prepare_cmd(nfc, cmd, NAND_CMD_RNDOUTSTART, 1,
>> + mtd->writesize, 2);
>> + anfc_setpagecoladdr(nfc, page_addr, column);
>> + if (nfc->dma)
>> + nfc->rdintrmask = XFER_COMPLETE;
>> + else
>> + nfc->rdintrmask = READ_READY;
>> + break;
>> + case NAND_CMD_PARAM:
>> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
>> + anfc_setpagecoladdr(nfc, page_addr, column);
>> + anfc_setpktszcnt(nfc, sizeof(struct nand_onfi_params), 1);
>> + anfc_readfifo(nfc, PROG_RDPARAM,
>> + sizeof(struct nand_onfi_params));
>> + break;
>> + case NAND_CMD_READID:
>> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
>> + anfc_setpagecoladdr(nfc, page_addr, column);
>> + anfc_setpktszcnt(nfc, ONFI_ID_LEN, 1);
>> + anfc_readfifo(nfc, PROG_RDID, ONFI_ID_LEN);
>> + break;
>> + case NAND_CMD_ERASE1:
>> + addrcycles = nfc->raddr_cycles;
>> + prog = PROG_ERASE;
>> + anfc_prepare_cmd(nfc, cmd, NAND_CMD_ERASE2, 0, 0, addrcycles);
>> + column = page_addr & 0xffff;
>> + page_addr = (page_addr >> PG_ADDR_SHIFT) & 0xffff;
>> + anfc_setpagecoladdr(nfc, page_addr, column);
>> + wait = true;
>> + break;
>> + case NAND_CMD_STATUS:
>> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0);
>> + anfc_setpktszcnt(nfc, nfc->spktsize/4, 1);
>> + anfc_setpagecoladdr(nfc, page_addr, column);
>> + prog = PROG_STATUS;
>> + wait = read = true;
>> + break;
>> + case NAND_CMD_GET_FEATURES:
>> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
>> + anfc_setpagecoladdr(nfc, page_addr, column);
>> + anfc_setpktszcnt(nfc, nfc->spktsize, 1);
>> + anfc_readfifo(nfc, PROG_GET_FEATURE, 4);
>> + break;
>> + case NAND_CMD_SET_FEATURES:
>> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1);
>> + anfc_setpagecoladdr(nfc, page_addr, column);
>> + anfc_setpktszcnt(nfc, nfc->spktsize, 1);
>> + break;
>> + default:
>> + return;
>> + }
>> +
>> + if (wait) {
>> + anfc_enable_intrs(nfc, XFER_COMPLETE);
>> + writel(prog, nfc->base + PROG_OFST);
>> + anfc_wait_for_event(nfc, XFER_COMPLETE);
>> + }
>> +
>> + if (read)
>> + bufptr[0] = readl(nfc->base + FLASH_STS_OFST);
>> +}
>> +
>> +static void anfc_select_chip(struct mtd_info *mtd, int num)
>> +{
>> + u32 val;
>> + struct anfc *nfc = to_anfc(mtd);
>> +
>> + if (num == -1)
>> + return;
>> +
>> + val = readl(nfc->base + MEM_ADDR2_OFST);
>> + val = (val & ~(CS_MASK)) | (num << CS_SHIFT);
>> + writel(val, nfc->base + MEM_ADDR2_OFST);
>> +}
>> +
>> +static irqreturn_t anfc_irq_handler(int irq, void *ptr)
>> +{
>> + struct anfc *nfc = ptr;
>> + u32 regval = 0, status;
>> +
>> + status = readl(nfc->base + INTR_STS_OFST);
>> + if (status & XFER_COMPLETE) {
>> + complete(&nfc->xfercomp);
>> + regval |= XFER_COMPLETE;
>> + }
>> +
>> + if (status & READ_READY) {
>> + complete(&nfc->bufrdy);
>> + regval |= READ_READY;
>> + }
>> +
>> + if (status & WRITE_READY) {
>> + complete(&nfc->bufrdy);
>> + regval |= WRITE_READY;
>> + }
>> +
>> + if (status & MBIT_ERROR) {
>> + nfc->err = true;
>> + complete(&nfc->bufrdy);
>> + regval |= MBIT_ERROR;
>> + }
>> +
>> + if (regval) {
>> + writel(regval, nfc->base + INTR_STS_OFST);
>> + writel(0, nfc->base + INTR_STS_EN_OFST);
>> + writel(0, nfc->base + INTR_SIG_EN_OFST);
>> +
>> + return IRQ_HANDLED;
>> + }
>> +
>> + return IRQ_NONE;
>> +}
>> +
>> +static int anfc_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
>> + int addr, uint8_t *subfeature_param)
>> +{
>> + struct anfc *nfc = to_anfc(mtd);
>> + int status;
>> +
>> + if (!chip->onfi_version || !(le16_to_cpu(chip->onfi_params.opt_cmd)
>> + & ONFI_OPT_CMD_SET_GET_FEATURES))
>> + return -EINVAL;
>> +
>> + chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1);
>> + anfc_writefifo(nfc, PROG_SET_FEATURE, nfc->spktsize, subfeature_param);
>> +
>> + status = chip->waitfunc(mtd, chip);
>> + if (status & NAND_STATUS_FAIL)
>> + return -EIO;
>> +
>> + return 0;
>> +}
>> +
>> +static int anfc_init_timing_mode(struct anfc *nfc)
>> +{
>> + int mode, err;
>> + unsigned int feature[2], regval, i;
>> + struct nand_chip *chip = &nfc->chip;
>> + struct mtd_info *mtd = &nfc->mtd;
>> +
>> + memset(feature, 0, NVDDR_MODE_PACKET_SIZE);
>> + /* Get nvddr timing modes */
>> + mode = onfi_get_sync_timing_mode(chip) & 0xff;
>> + if (!mode) {
>> + mode = fls(onfi_get_async_timing_mode(&nfc->chip)) - 1;
>> + regval = mode;
>> + } else {
>> + mode = fls(mode) - 1;
>> + regval = NVDDR_MODE | mode << NVDDR_TIMING_MODE_SHIFT;
>> + mode |= ONFI_DATA_INTERFACE_NVDDR;
>> + }
>> +
>> + feature[0] = mode;
>> + for (i = 0; i < nfc->num_cs; i++) {
>> + chip->select_chip(mtd, i);
>> + err = chip->onfi_set_features(mtd, chip,
>> + ONFI_FEATURE_ADDR_TIMING_MODE,
>> + (uint8_t *)feature);
>> + if (err)
>> + return err;
>> + }
>> + writel(regval, nfc->base + DATA_INTERFACE_REG);
>> +
>> + if (mode & ONFI_DATA_INTERFACE_NVDDR)
>> + nfc->spktsize = NVDDR_MODE_PACKET_SIZE;
>> +
>> + return 0;
>> +}
>> +
>> +static int anfc_probe(struct platform_device *pdev)
>> +{
>> + struct anfc *nfc;
>> + struct mtd_info *mtd;
>> + struct nand_chip *nand_chip;
>> + struct resource *res;
>> + struct mtd_part_parser_data ppdata;
>> + int err;
>> +
>> + nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL);
>> + if (!nfc)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + nfc->base = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(nfc->base))
>> + return PTR_ERR(nfc->base);
>> +
>> + mtd = &nfc->mtd;
>> + nand_chip = &nfc->chip;
>> + nand_chip->priv = nfc;
>> + mtd->priv = nand_chip;
>> + mtd->name = DRIVER_NAME;
>> + nfc->dev = &pdev->dev;
>> + mtd->dev.parent = &pdev->dev;
>> +
>> + nand_chip->cmdfunc = anfc_cmd_function;
>> + nand_chip->waitfunc = anfc_device_ready;
>> + nand_chip->chip_delay = 30;
>> + nand_chip->read_buf = anfc_read_buf;
>> + nand_chip->write_buf = anfc_write_buf;
>> + nand_chip->read_byte = anfc_read_byte;
>> + nand_chip->options = NAND_BUSWIDTH_AUTO | NAND_NO_SUBPAGE_WRITE;
>> + nand_chip->bbt_options = NAND_BBT_USE_FLASH;
>> + nand_chip->select_chip = anfc_select_chip;
>> + nand_chip->onfi_set_features = anfc_onfi_set_features;
>> + nfc->dma = of_property_read_bool(pdev->dev.of_node,
>> + "arasan,has-mdma");
>> + nfc->num_cs = 1;
>> + of_property_read_u32(pdev->dev.of_node, "num-cs", &nfc->num_cs);
>
> I get the feeling that this device tree binding doesn't support multiple
> chips very well, but I can't find the v5 binding to confirm...
>
> Normally, we suggest that you represent the NAND chip separate from the
> NAND controller. See, e.g.,
> Documentation/devicetree/bindings/mtd/sunxi-nand.txt which has:
>
> nfc: nand@01c03000 {
> compatible = "allwinner,sun4i-a10-nand";
> reg = <0x01c03000 0x1000>;
> ...
> nand@0 {
> reg = <0>;
> ...
> };
>
> // you could have nand@1, nand@2, etc.
> };
>
>
>> + platform_set_drvdata(pdev, nfc);
>> + init_completion(&nfc->bufrdy);
>> + init_completion(&nfc->xfercomp);
>> + nfc->irq = platform_get_irq(pdev, 0);
>> + if (nfc->irq < 0) {
>
> drivers/mtd/nand/arasan_nand.c: In function 'anfc_probe':
> drivers/mtd/nand/arasan_nand.c:900:15: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
> if (nfc->irq < 0) {
> ^
>
>> + dev_err(&pdev->dev, "platform_get_irq failed\n");
>> + return -ENXIO;
>> + }
>> + err = devm_request_irq(&pdev->dev, nfc->irq, anfc_irq_handler,
>> + 0, "arasannfc", nfc);
>> + if (err)
>> + return err;
>> + nfc->clk_sys = devm_clk_get(&pdev->dev, "clk_sys");
>> + if (IS_ERR(nfc->clk_sys)) {
>> + dev_err(&pdev->dev, "sys clock not found.\n");
>> + return PTR_ERR(nfc->clk_sys);
>> + }
>> +
>> + nfc->clk_flash = devm_clk_get(&pdev->dev, "clk_flash");
>> + if (IS_ERR(nfc->clk_flash)) {
>> + dev_err(&pdev->dev, "flash clock not found.\n");
>> + return PTR_ERR(nfc->clk_flash);
>> + }
>> +
>> + err = clk_prepare_enable(nfc->clk_sys);
>> + if (err) {
>> + dev_err(&pdev->dev, "Unable to enable sys clock.\n");
>> + return err;
>> + }
>> +
>> + err = clk_prepare_enable(nfc->clk_flash);
>> + if (err) {
>> + dev_err(&pdev->dev, "Unable to enable flash clock.\n");
>> + goto clk_dis_sys;
>> + }
>> +
>> + nfc->spktsize = SDR_MODE_PACKET_SIZE;
>> + err = nand_scan_ident(mtd, nfc->num_cs, NULL);
>> + if (err) {
>> + dev_err(&pdev->dev, "nand_scan_ident for NAND failed\n");
>> + goto clk_dis_all;
>> + }
>> + if (nand_chip->onfi_version) {
>> + nfc->raddr_cycles = nand_chip->onfi_params.addr_cycles & 0xf;
>> + nfc->caddr_cycles =
>> + (nand_chip->onfi_params.addr_cycles >> 4) & 0xf;
>> + } else {
>> + /*For non-ONFI devices, configuring the address cyles as 5 */
>
> Space after /*
>
>> + nfc->raddr_cycles = nfc->caddr_cycles = 5;
>> + }
>> +
>> + err = anfc_init_timing_mode(nfc);
>> + if (err) {
>> + dev_err(&pdev->dev, "timing mode init failed\n");
>> + goto clk_dis_all;
>> + }
>> +
>> + err = anfc_ecc_init(mtd, &nand_chip->ecc);
>> + if (err)
>> + goto clk_dis_all;
>> +
>> + err = nand_scan_tail(mtd);
>> + if (err) {
>> + dev_err(&pdev->dev, "nand_scan_tail for NAND failed\n");
>> + goto clk_dis_all;
>> + }
>> +
>> + ppdata.of_node = pdev->dev.of_node;
>
> The of_node field is gone now. Just use nand_set_flash_node(). (Please rebase
> on l2-mtd.git before submitting MTD changes. See:
> http://linux-mtd.infradead.org/source.html )
>
>> +
>> + err = mtd_device_parse_register(&nfc->mtd, NULL, &ppdata, NULL, 0);
>
> Then, you won't need ppdata, so you can just do:
>
> err = mtd_device_register(&nfc->mtd, NULL, 0);
>
>> + if (err)
>> + goto clk_dis_all;
>> +
>> + return 0;
>> +
>> +clk_dis_all:
>> + clk_disable_unprepare(nfc->clk_flash);
>> +clk_dis_sys:
>> + clk_disable_unprepare(nfc->clk_sys);
>> +
>> + return err;
>> +}
>> +
>> +static int anfc_remove(struct platform_device *pdev)
>> +{
>> + struct anfc *nfc = platform_get_drvdata(pdev);
>> +
>> + clk_disable_unprepare(nfc->clk_sys);
>> + clk_disable_unprepare(nfc->clk_flash);
>> +
>> + nand_release(&nfc->mtd);
>
> Probably want to disable the clocks only after nand_release()?
> Otherwise, you might have a race.
>
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id anfc_ids[] = {
>> + { .compatible = "arasan,nfc-v3p10" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, anfc_ids);
>> +
>> +static struct platform_driver anfc_driver = {
>> + .driver = {
>> + .name = DRIVER_NAME,
>> + .of_match_table = anfc_ids,
>> + },
>> + .probe = anfc_probe,
>> + .remove = anfc_remove,
>> +};
>> +module_platform_driver(anfc_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Xilinx, Inc");
>> +MODULE_DESCRIPTION("Arasan NAND Flash Controller Driver");
>
> Brian