[PATCH] mmc: sdhci-of-at91: fix wakeup issue when using runtime pm

From: Ludovic Desroches
Date: Thu Mar 10 2016 - 05:30:44 EST


It was impossible to wake-up on card detect event because when sdhci
controller is runtime suspend, it is assumed that all the clocks are
disabled so we can't get irqs.
If the device is removable and there is no gpio to manage the card
detection then card detection polling is used.

Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
---

Hi Ulf, Adrian,

Following the discussion, I need to fix my issue. I think we could both agree
on this patch that I see more as temporary workaround.

I will try to change the muxing of the card detect pio in order to no more
use the sdhci controller to manage it but a gpio. If it do not work then
I may send another patch in the spirit of the previous one (keeping one clock
enabled and not calling sdhci_runtime_suspend_host()).

Regards

drivers/mmc/host/sdhci-of-at91.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 35c02fc..dac8508 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -18,6 +18,7 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -204,6 +205,21 @@ static int sdhci_at91_probe(struct platform_device *pdev)
if (ret)
goto pm_runtime_disable;

+ /*
+ * When calling sdhci_runtime_suspend_host(), the sdhci layer makes
+ * the assumption that all the clocks of the controller are disabled.
+ * It means we can't get irq from it when it is runtime suspended.
+ * For that reason, it is not planned to wake-up on a card detect irq
+ * from the controller.
+ * If we want to use runtime PM and to be able to wake-up on card
+ * insertion, we have to use a GPIO for the card detection or we can
+ * use polling for the card detection. Be aware that using polling
+ * will resume/suspend the controller between each attempt.
+ */
+ if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE) &&
+ IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc)))
+ host->mmc->caps |= MMC_CAP_NEEDS_POLL;
+
pm_runtime_put_autosuspend(&pdev->dev);

return 0;
--
2.5.0