[PATCH v3 9/9] ARM: dts: rockchip: add to support emac for rk3036 SoCs

From: Caesar Wang
Date: Mon Mar 14 2016 - 04:04:51 EST


From: Xing Zheng <zhengxing@xxxxxxxxxxxxxx>

This patch adds the emac device node for rk3036 SoCs.
We need to let mac clock under the DPLL which is able to provide
the accurate 50MHz what mac_ref need, since that will cause some
unstable things if the cpufreq is working.

Signed-off-by: Xing Zheng <zhengxing@xxxxxxxxxxxxxx>
Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
Cc: linux-rockchip@xxxxxxxxxxxxxxxxxxx
Cc: Xing Zheng <zhengxing@xxxxxxxxxxxxxx>
Cc: Heiko Stuebner <heiko@xxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx

---

Changes in v3:
- rename reset-gpio to phy-reset-gpios.
- change the commit.
- remove the pcfg_output_high, that's really not needed for emac.
- Add the Cc people.
- Fixes the 'zhengxing' to 'Xing Zheng'.

Changes in v2:
- rename phy-reset-gpio to reset-gpios.

arch/arm/boot/dts/rk3036-evb.dts | 14 ++++++++++++++
arch/arm/boot/dts/rk3036-kylin.dts | 14 ++++++++++++++
arch/arm/boot/dts/rk3036.dtsi | 39 ++++++++++++++++++++++++++++++++++++++
3 files changed, 67 insertions(+)

diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 28a0336..b3d6ec8 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -47,6 +47,20 @@
compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
};

+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+ phy = <&phy0>;
+ phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+ phy-reset-duration = <10>; /* millisecond */
+
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
&i2c1 {
status = "okay";

diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index eb9c979..951f15d 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -112,6 +112,20 @@
status = "okay";
};

+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+ phy = <&phy0>;
+ phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+ phy-reset-duration = <10>; /* millisecond */
+
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
&emmc {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 90faa86..5175a2a 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -223,6 +223,27 @@
status = "disabled";
};

+ emac: ethernet@10200000 {
+ compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+ reg = <0x10200000 0x4000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rockchip,grf = <&grf>;
+ clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+ clock-names = "hclk", "macref", "macclk";
+ /*
+ * Fix the emac parent clock is DPLL instead of APLL.
+ * since that will cause some unstable things if the cpufreq
+ * is working. (e.g: the accurate 50MHz what mac_ref need)
+ */
+ assigned-clocks = <&cru SCLK_MACPLL>;
+ assigned-clock-parents = <&cru PLL_DPLL>;
+ max-speed = <100>;
+ phy-mode = "rmii";
+ status = "disabled";
+ };
+
sdmmc: dwmmc@10214000 {
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
@@ -628,6 +649,24 @@
};
};

+ emac {
+ emac_xfer: emac-xfer {
+ rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
+ <2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
+ <2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
+ <2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
+ <2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
+ <2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
+ <2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
+ <2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
+ };
+
+ emac_mdio: emac-mdio {
+ rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
+ <2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
--
1.9.1