[PATCH 7/8] input: misc: Add TWL6030 power button support to twl-pwrbutton
From: Paul Kocialkowski
Date: Tue Mar 29 2016 - 15:23:47 EST
This renames the twl4030-pwrbutton driver to twl-pwrbutton, since power button
handling is very similar on most TWL chips. This also introduces TWL6030 power
button support.
TWL6030 power button support requires the following additional changes:
* Devicetree binding and support
* Interrupt unmasking and remasking support
Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
---
.../devicetree/bindings/input/twl-pwrbutton.txt | 22 ++++
.../bindings/input/twl4030-pwrbutton.txt | 21 ---
arch/arm/boot/dts/twl6030.dtsi | 5 +
arch/arm/configs/omap2plus_defconfig | 2 +-
drivers/input/misc/Kconfig | 8 +-
drivers/input/misc/Makefile | 2 +-
drivers/input/misc/twl-pwrbutton.c | 143 +++++++++++++++++++++
drivers/input/misc/twl4030-pwrbutton.c | 116 -----------------
drivers/mfd/twl-core.c | 12 +-
include/linux/i2c/twl.h | 1 +
10 files changed, 187 insertions(+), 145 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/twl-pwrbutton.txt
delete mode 100644 Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
create mode 100644 drivers/input/misc/twl-pwrbutton.c
delete mode 100644 drivers/input/misc/twl4030-pwrbutton.c
diff --git a/Documentation/devicetree/bindings/input/twl-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl-pwrbutton.txt
new file mode 100644
index 0000000..4931be4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/twl-pwrbutton.txt
@@ -0,0 +1,22 @@
+Texas Instruments TWL family pwrbutton module
+
+This module is part of a TWL chip. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+ - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
+ - "ti,twl6030-pwrbutton": For controllers compatible with twl6030
+- interrupts: should be one of the following
+ - <8>: For controllers compatible with the twl
+
+Example:
+
+&twl {
+ twl_pwrbutton: pwrbutton {
+ compatible = "ti,twl4030-pwrbutton";
+ interrupts = <8>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
deleted file mode 100644
index c864a46..0000000
--- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Texas Instruments TWL family (twl4030) pwrbutton module
-
-This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
- - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
-- interrupts: should be one of the following
- - <8>: For controllers compatible with twl4030
-
-Example:
-
-&twl {
- twl_pwrbutton: pwrbutton {
- compatible = "ti,twl4030-pwrbutton";
- interrupts = <8>;
- };
-};
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 55eb35f..6a52df1 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -99,4 +99,9 @@
compatible = "ti,twl6030-pwmled";
#pwm-cells = <2>;
};
+
+ twl_pwrbutton: pwrbutton {
+ compatible = "ti,twl6030-pwrbutton";
+ interrupts = <0>;
+ };
};
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 156bc88..ff9752a 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -217,7 +217,7 @@ CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_TPS65218_PWRBUTTON=m
-CONFIG_INPUT_TWL4030_PWRBUTTON=m
+CONFIG_INPUT_TWL_PWRBUTTON=m
CONFIG_INPUT_PALMAS_PWRBUTTON=m
CONFIG_SERIO=m
# CONFIG_LEGACY_PTYS is not set
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 6abb6df..f643e14 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -459,15 +459,15 @@ config INPUT_AXP20X_PEK
be called axp20x-pek.
-config INPUT_TWL4030_PWRBUTTON
- tristate "TWL4030 Power button Driver"
+config INPUT_TWL_PWRBUTTON
+ tristate "TWL Power button Driver"
depends on TWL_CORE
help
Say Y here if you want to enable power key reporting via the
- TWL4030 family of chips.
+ TWL family of chips.
To compile this driver as a module, choose M here. The module will
- be called twl4030_pwrbutton.
+ be called twl_pwrbutton.
config INPUT_TWL4030_VIBRA
tristate "Support for TWL4030 Vibrator"
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0357a08..f77f5e7 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -66,7 +66,7 @@ obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o
-obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
+obj-$(CONFIG_INPUT_TWL_PWRBUTTON) += twl-pwrbutton.o
obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o
obj-$(CONFIG_INPUT_TWL6040_VIBRA) += twl6040-vibra.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
diff --git a/drivers/input/misc/twl-pwrbutton.c b/drivers/input/misc/twl-pwrbutton.c
new file mode 100644
index 0000000..a7bc8ad
--- /dev/null
+++ b/drivers/input/misc/twl-pwrbutton.c
@@ -0,0 +1,143 @@
+/**
+ * twl4030-pwrbutton.c - TWL4030 Power Button Input Driver
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Peter De Schrijver <peter.de-schrijver@xxxxxxxxx>
+ * Several fixes by Felipe Balbi <felipe.balbi@xxxxxxxxx>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl.h>
+
+#define PWR_PWRON_IRQ (1 << 0)
+
+#define TWL4030_STS_HW_CONDITIONS 0x0f
+#define TWL6030_STS_HW_CONDITIONS 0x21
+
+static irqreturn_t powerbutton_irq(int irq, void *_pwr)
+{
+ struct input_dev *pwr = _pwr;
+ int err;
+ u8 value;
+
+ if (twl_class_is_4030())
+ err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &value,
+ TWL4030_STS_HW_CONDITIONS);
+ else
+ err = twl_i2c_read_u8(TWL6030_MODULE_ID0, &value,
+ TWL6030_STS_HW_CONDITIONS);
+
+ if (!err) {
+ pm_wakeup_event(pwr->dev.parent, 0);
+ input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
+ input_sync(pwr);
+ } else {
+ dev_err(pwr->dev.parent, "twl4030: i2c error %d while reading"
+ " TWL4030 PM_MASTER STS_HW_CONDITIONS register\n", err);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int twl_pwrbutton_probe(struct platform_device *pdev)
+{
+ struct input_dev *pwr;
+ int irq = platform_get_irq(pdev, 0);
+ int err;
+
+ pwr = devm_input_allocate_device(&pdev->dev);
+ if (!pwr) {
+ dev_err(&pdev->dev, "Can't allocate power button\n");
+ return -ENOMEM;
+ }
+
+ pwr->evbit[0] = BIT_MASK(EV_KEY);
+ pwr->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+ pwr->name = "twl_pwrbutton";
+ pwr->phys = "twl_pwrbutton/input0";
+ pwr->dev.parent = &pdev->dev;
+
+ if (twl_class_is_6030()) {
+ twl6030_interrupt_unmask(TWL6030_PWRON_INT_MASK,
+ REG_INT_MSK_LINE_A);
+ twl6030_interrupt_unmask(TWL6030_PWRON_INT_MASK,
+ REG_INT_MSK_STS_A);
+ }
+
+ err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+ IRQF_ONESHOT,
+ "twl_pwrbutton", pwr);
+ if (err < 0) {
+ dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
+ return err;
+ }
+
+ err = input_register_device(pwr);
+ if (err) {
+ dev_err(&pdev->dev, "Can't register power button: %d\n", err);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, pwr);
+ device_init_wakeup(&pdev->dev, true);
+
+ return 0;
+}
+
+static int twl_pwrbutton_remove(struct platform_device *pdev)
+{
+ if (twl_class_is_6030()) {
+ twl6030_interrupt_mask(TWL6030_PWRON_INT_MASK,
+ REG_INT_MSK_LINE_A);
+ twl6030_interrupt_mask(TWL6030_PWRON_INT_MASK,
+ REG_INT_MSK_STS_A);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl_pwrbutton_dt_match_table[] = {
+ { .compatible = "ti,twl4030-pwrbutton" },
+ { .compatible = "ti,twl6030-pwrbutton" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, twl_pwrbutton_dt_match_table);
+#endif
+
+static struct platform_driver twl_pwrbutton_driver = {
+ .probe = twl_pwrbutton_probe,
+ .remove = twl_pwrbutton_remove,
+ .driver = {
+ .name = "twl_pwrbutton",
+ .of_match_table = of_match_ptr(twl_pwrbutton_dt_match_table),
+ },
+};
+module_platform_driver(twl_pwrbutton_driver);
+
+MODULE_ALIAS("platform:twl_pwrbutton");
+MODULE_DESCRIPTION("TWL Power Button");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter De Schrijver <peter.de-schrijver@xxxxxxxxx>");
+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@xxxxxxxxx>");
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
deleted file mode 100644
index 603fc2f..0000000
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/**
- * twl4030-pwrbutton.c - TWL4030 Power Button Input Driver
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Peter De Schrijver <peter.de-schrijver@xxxxxxxxx>
- * Several fixes by Felipe Balbi <felipe.balbi@xxxxxxxxx>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of this
- * archive for more details.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-
-#define PWR_PWRON_IRQ (1 << 0)
-
-#define STS_HW_CONDITIONS 0xf
-
-static irqreturn_t powerbutton_irq(int irq, void *_pwr)
-{
- struct input_dev *pwr = _pwr;
- int err;
- u8 value;
-
- err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &value, STS_HW_CONDITIONS);
- if (!err) {
- pm_wakeup_event(pwr->dev.parent, 0);
- input_report_key(pwr, KEY_POWER, value & PWR_PWRON_IRQ);
- input_sync(pwr);
- } else {
- dev_err(pwr->dev.parent, "twl4030: i2c error %d while reading"
- " TWL4030 PM_MASTER STS_HW_CONDITIONS register\n", err);
- }
-
- return IRQ_HANDLED;
-}
-
-static int twl4030_pwrbutton_probe(struct platform_device *pdev)
-{
- struct input_dev *pwr;
- int irq = platform_get_irq(pdev, 0);
- int err;
-
- pwr = devm_input_allocate_device(&pdev->dev);
- if (!pwr) {
- dev_err(&pdev->dev, "Can't allocate power button\n");
- return -ENOMEM;
- }
-
- pwr->evbit[0] = BIT_MASK(EV_KEY);
- pwr->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
- pwr->name = "twl4030_pwrbutton";
- pwr->phys = "twl4030_pwrbutton/input0";
- pwr->dev.parent = &pdev->dev;
-
- err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
- IRQF_ONESHOT,
- "twl4030_pwrbutton", pwr);
- if (err < 0) {
- dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
- return err;
- }
-
- err = input_register_device(pwr);
- if (err) {
- dev_err(&pdev->dev, "Can't register power button: %d\n", err);
- return err;
- }
-
- platform_set_drvdata(pdev, pwr);
- device_init_wakeup(&pdev->dev, true);
-
- return 0;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id twl4030_pwrbutton_dt_match_table[] = {
- { .compatible = "ti,twl4030-pwrbutton" },
- {},
-};
-MODULE_DEVICE_TABLE(of, twl4030_pwrbutton_dt_match_table);
-#endif
-
-static struct platform_driver twl4030_pwrbutton_driver = {
- .probe = twl4030_pwrbutton_probe,
- .driver = {
- .name = "twl4030_pwrbutton",
- .of_match_table = of_match_ptr(twl4030_pwrbutton_dt_match_table),
- },
-};
-module_platform_driver(twl4030_pwrbutton_driver);
-
-MODULE_ALIAS("platform:twl4030_pwrbutton");
-MODULE_DESCRIPTION("Triton2 Power Button");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Peter De Schrijver <peter.de-schrijver@xxxxxxxxx>");
-MODULE_AUTHOR("Felipe Balbi <felipe.balbi@xxxxxxxxx>");
-
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 74372bc..a1bfe23 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -848,13 +848,21 @@ add_children(struct twl_platform_data *pdata, unsigned irq_base,
return PTR_ERR(child);
}
- if (IS_ENABLED(CONFIG_INPUT_TWL4030_PWRBUTTON) && twl_class_is_4030()) {
- child = add_child(TWL_MODULE_PM_MASTER, "twl4030_pwrbutton",
+ if (IS_ENABLED(CONFIG_INPUT_TWL_PWRBUTTON) && twl_class_is_4030()) {
+ child = add_child(TWL_MODULE_PM_MASTER, "twl_pwrbutton",
NULL, 0, true, irq_base + 8 + 0, 0);
if (IS_ERR(child))
return PTR_ERR(child);
}
+ if (IS_ENABLED(CONFIG_INPUT_TWL_PWRBUTTON) && twl_class_is_6030()) {
+ child = add_child(TWL_MODULE_PM_MASTER, "twl_pwrbutton",
+ NULL, 0, true, irq_base + 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+
if (IS_ENABLED(CONFIG_MFD_TWL4030_AUDIO) && pdata->audio &&
twl_class_is_4030()) {
child = add_child(TWL4030_MODULE_AUDIO_VOICE, "twl4030-audio",
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 2decb190..20d33b7 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -127,6 +127,7 @@ enum twl6030_module_ids {
#define REG_INT_MSK_STS_C 0x08
/* MASK INT REG GROUP A */
+#define TWL6030_PWRON_INT_MASK 0x01
#define TWL6030_PWR_INT_MASK 0x07
#define TWL6030_RTC_INT_MASK 0x18
#define TWL6030_HOTDIE_INT_MASK 0x20
--
2.7.4