Re: [PATCH v4] hp206c: Initial support for reading sensor values

[Jonathan Cameron]

On 29/03/16 17:14, Crestez Dan Leonard wrote:
> Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
> ---
> 
> Previous version had an extra printk on pressure read, please ignore. Also
> patch update notes were above the ---.
As a general process point, it is useful to have the complete history
here rather than just since the last version.  Often reviewers (particularly me
will only catch up once a week so it's useful to have a record of all the
updates in one place).

Anyhow, looks good.

Applied to the togreg branch of iio.git - initially pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan
> 
>  drivers/iio/pressure/Kconfig  |  10 +
>  drivers/iio/pressure/Makefile |   1 +
>  drivers/iio/pressure/hp206c.c | 426 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 437 insertions(+)
>  create mode 100644 drivers/iio/pressure/hp206c.c
> 
> diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
> index 31c0e1f..8de0192 100644
> --- a/drivers/iio/pressure/Kconfig
> +++ b/drivers/iio/pressure/Kconfig
> @@ -148,4 +148,14 @@ config T5403
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called t5403.
>  
> +config HP206C
> +	tristate "HOPERF HP206C precision barometer and altimeter sensor"
> +	depends on I2C
> +	help
> +	  Say yes here to build support for the HOPREF HP206C precision
> +	  barometer and altimeter sensor.
> +
> +	  This driver can also be built as a module. If so, the module will
> +	  be called hp206c.
> +
>  endmenu
> diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
> index d336af1..6e60863 100644
> --- a/drivers/iio/pressure/Makefile
> +++ b/drivers/iio/pressure/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
>  st_pressure-y := st_pressure_core.o
>  st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
>  obj-$(CONFIG_T5403) += t5403.o
> +obj-$(CONFIG_HP206C) += hp206c.o
>  
>  obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
>  obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o
> diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c
> new file mode 100644
> index 0000000..90f2b6e
> --- /dev/null
> +++ b/drivers/iio/pressure/hp206c.c
> @@ -0,0 +1,426 @@
> +/*
> + * hp206c.c - HOPERF HP206C precision barometer and altimeter sensor
> + *
> + * Copyright (c) 2016, Intel Corporation.
> + *
> + * This file is subject to the terms and conditions of version 2 of
> + * the GNU General Public License.  See the file COPYING in the main
> + * directory of this archive for more details.
> + *
> + * (7-bit I2C slave address 0x76)
> + *
> + * Datasheet:
> + *  http://www.hoperf.com/upload/sensor/HP206C_DataSheet_EN_V2.0.pdf
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/delay.h>
> +#include <linux/util_macros.h>
> +#include <linux/acpi.h>
> +
> +/* I2C commands: */
> +#define HP206C_CMD_SOFT_RST	0x06
> +
> +#define HP206C_CMD_ADC_CVT	0x40
> +
> +#define HP206C_CMD_ADC_CVT_OSR_4096	0x00
> +#define HP206C_CMD_ADC_CVT_OSR_2048	0x04
> +#define HP206C_CMD_ADC_CVT_OSR_1024	0x08
> +#define HP206C_CMD_ADC_CVT_OSR_512	0x0c
> +#define HP206C_CMD_ADC_CVT_OSR_256	0x10
> +#define HP206C_CMD_ADC_CVT_OSR_128	0x14
> +
> +#define HP206C_CMD_ADC_CVT_CHNL_PT	0x00
> +#define HP206C_CMD_ADC_CVT_CHNL_T	0x02
> +
> +#define HP206C_CMD_READ_P	0x30
> +#define HP206C_CMD_READ_T	0x32
> +
> +#define HP206C_CMD_READ_REG	0x80
> +#define HP206C_CMD_WRITE_REG	0xc0
> +
> +#define HP206C_REG_INT_EN	0x0b
> +#define HP206C_REG_INT_CFG	0x0c
> +
> +#define HP206C_REG_INT_SRC	0x0d
> +#define HP206C_FLAG_DEV_RDY	0x40
> +
> +#define HP206C_REG_PARA		0x0f
> +#define HP206C_FLAG_CMPS_EN	0x80
> +
> +/* Maximum spin for DEV_RDY */
> +#define HP206C_MAX_DEV_RDY_WAIT_COUNT 20
> +#define HP206C_DEV_RDY_WAIT_US    20000
> +
> +struct hp206c_data {
> +	struct mutex mutex;
> +	struct i2c_client *client;
> +	int temp_osr_index;
> +	int pres_osr_index;
> +};
> +
> +struct hp206c_osr_setting {
> +	u8 osr_mask;
> +	unsigned int temp_conv_time_us;
> +	unsigned int pres_conv_time_us;
> +};
> +
> +/* Data from Table 5 in datasheet. */
> +static const struct hp206c_osr_setting hp206c_osr_settings[] = {
> +	{ HP206C_CMD_ADC_CVT_OSR_4096,	65600,	131100	},
> +	{ HP206C_CMD_ADC_CVT_OSR_2048,	32800,	65600	},
> +	{ HP206C_CMD_ADC_CVT_OSR_1024,	16400,	32800	},
> +	{ HP206C_CMD_ADC_CVT_OSR_512,	8200,	16400	},
> +	{ HP206C_CMD_ADC_CVT_OSR_256,	4100,	8200	},
> +	{ HP206C_CMD_ADC_CVT_OSR_128,	2100,	4100	},
> +};
> +static const int hp206c_osr_rates[] = { 4096, 2048, 1024, 512, 256, 128 };
> +static const char hp206c_osr_rates_str[] = "4096 2048 1024 512 256 128";
> +
> +static inline int hp206c_read_reg(struct i2c_client *client, u8 reg)
> +{
> +	return i2c_smbus_read_byte_data(client, HP206C_CMD_READ_REG | reg);
> +}
> +
> +static inline int hp206c_write_reg(struct i2c_client *client, u8 reg, u8 val)
> +{
> +	return i2c_smbus_write_byte_data(client,
> +			HP206C_CMD_WRITE_REG | reg, val);
> +}
> +
> +static int hp206c_read_20bit(struct i2c_client *client, u8 cmd)
> +{
> +	int ret;
> +	u8 values[3];
> +
> +	ret = i2c_smbus_read_i2c_block_data(client, cmd, 3, values);
> +	if (ret < 0)
> +		return ret;
> +	if (ret != 3)
> +		return -EIO;
> +	return ((values[0] & 0xF) << 16) | (values[1] << 8) | (values[2]);
> +}
> +
> +/* Spin for max 160ms until DEV_RDY is 1, or return error. */
> +static int hp206c_wait_dev_rdy(struct iio_dev *indio_dev)
> +{
> +	int ret;
> +	int count = 0;
> +	struct hp206c_data *data = iio_priv(indio_dev);
> +	struct i2c_client *client = data->client;
> +
> +	while (++count <= HP206C_MAX_DEV_RDY_WAIT_COUNT) {
> +		ret = hp206c_read_reg(client, HP206C_REG_INT_SRC);
> +		if (ret < 0) {
> +			dev_err(&indio_dev->dev, "Failed READ_REG INT_SRC: %d\n", ret);
> +			return ret;
> +		}
> +		if (ret & HP206C_FLAG_DEV_RDY)
> +			return 0;
> +		usleep_range(HP206C_DEV_RDY_WAIT_US, HP206C_DEV_RDY_WAIT_US * 3 / 2);
> +	}
> +	return -ETIMEDOUT;
> +}
> +
> +static int hp206c_set_compensation(struct i2c_client *client, bool enabled)
> +{
> +	int val;
> +
> +	val = hp206c_read_reg(client, HP206C_REG_PARA);
> +	if (val < 0)
> +		return val;
> +	if (enabled)
> +		val |= HP206C_FLAG_CMPS_EN;
> +	else
> +		val &= ~HP206C_FLAG_CMPS_EN;
> +
> +	return hp206c_write_reg(client, HP206C_REG_PARA, val);
> +}
> +
> +/* Do a soft reset */
> +static int hp206c_soft_reset(struct iio_dev *indio_dev)
> +{
> +	int ret;
> +	struct hp206c_data *data = iio_priv(indio_dev);
> +	struct i2c_client *client = data->client;
> +
> +	ret = i2c_smbus_write_byte(client, HP206C_CMD_SOFT_RST);
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to reset device: %d\n", ret);
> +		return ret;
> +	}
> +
> +	usleep_range(400, 600);
> +
> +	ret = hp206c_wait_dev_rdy(indio_dev);
> +	if (ret) {
> +		dev_err(&client->dev, "Device not ready after soft reset: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = hp206c_set_compensation(client, true);
> +	if (ret)
> +		dev_err(&client->dev, "Failed to enable compensation: %d\n", ret);
> +	return ret;
> +}
> +
> +static int hp206c_conv_and_read(struct iio_dev *indio_dev,
> +				u8 conv_cmd, u8 read_cmd,
> +				unsigned int sleep_us)
> +{
> +	int ret;
> +	struct hp206c_data *data = iio_priv(indio_dev);
> +	struct i2c_client *client = data->client;
> +
> +	ret = hp206c_wait_dev_rdy(indio_dev);
> +	if (ret < 0) {
> +		dev_err(&indio_dev->dev, "Device not ready: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = i2c_smbus_write_byte(client, conv_cmd);
> +	if (ret < 0) {
> +		dev_err(&indio_dev->dev, "Failed convert: %d\n", ret);
> +		return ret;
> +	}
> +
> +	usleep_range(sleep_us, sleep_us * 3 / 2);
> +
> +	ret = hp206c_wait_dev_rdy(indio_dev);
> +	if (ret < 0) {
> +		dev_err(&indio_dev->dev, "Device not ready: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = hp206c_read_20bit(client, read_cmd);
> +	if (ret < 0)
> +		dev_err(&indio_dev->dev, "Failed read: %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static int hp206c_read_raw(struct iio_dev *indio_dev,
> +			   struct iio_chan_spec const *chan, int *val,
> +			   int *val2, long mask)
> +{
> +	int ret;
> +	struct hp206c_data *data = iio_priv(indio_dev);
> +	const struct hp206c_osr_setting *osr_setting;
> +	u8 conv_cmd;
> +
> +	mutex_lock(&data->mutex);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> +		switch (chan->type) {
> +		case IIO_TEMP:
> +			*val = hp206c_osr_rates[data->temp_osr_index];
> +			ret = IIO_VAL_INT;
> +			break;
> +
> +		case IIO_PRESSURE:
> +			*val = hp206c_osr_rates[data->pres_osr_index];
> +			ret = IIO_VAL_INT;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +		}
> +		break;
> +
> +	case IIO_CHAN_INFO_RAW:
> +		switch (chan->type) {
> +		case IIO_TEMP:
> +			osr_setting = &hp206c_osr_settings[data->temp_osr_index];
> +			conv_cmd = HP206C_CMD_ADC_CVT |
> +					osr_setting->osr_mask |
> +					HP206C_CMD_ADC_CVT_CHNL_T;
> +			ret = hp206c_conv_and_read(indio_dev,
> +					conv_cmd,
> +					HP206C_CMD_READ_T,
> +					osr_setting->temp_conv_time_us);
> +			if (ret >= 0) {
> +				/* 20 significant bits are provided.
> +				 * Extend sign over the rest.
> +				 */
> +				*val = sign_extend32(ret, 19);
> +				ret = IIO_VAL_INT;
> +			}
> +			break;
> +
> +		case IIO_PRESSURE:
> +			osr_setting = &hp206c_osr_settings[data->pres_osr_index];
> +			conv_cmd = HP206C_CMD_ADC_CVT |
> +					osr_setting->osr_mask |
> +					HP206C_CMD_ADC_CVT_CHNL_PT;
> +			ret = hp206c_conv_and_read(indio_dev,
> +					conv_cmd,
> +					HP206C_CMD_READ_P,
> +					osr_setting->pres_conv_time_us);
> +			if (ret >= 0) {
> +				*val = ret;
> +				ret = IIO_VAL_INT;
> +			}
> +			break;
> +		default:
> +			ret = -EINVAL;
> +		}
> +		break;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		switch (chan->type) {
> +		case IIO_TEMP:
> +			*val = 0;
> +			*val2 = 10000;
> +			ret = IIO_VAL_INT_PLUS_MICRO;
> +			break;
> +
> +		case IIO_PRESSURE:
> +			*val = 0;
> +			*val2 = 1000;
> +			ret = IIO_VAL_INT_PLUS_MICRO;
> +			break;
> +		default:
> +			ret = -EINVAL;
> +		}
> +		break;
> +
> +	default:
> +		ret = -EINVAL;
> +	}
> +
> +	mutex_unlock(&data->mutex);
> +	return ret;
> +}
> +
> +static int hp206c_write_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int val, int val2, long mask)
> +{
> +	int ret = 0;
> +	struct hp206c_data *data = iio_priv(indio_dev);
> +
> +	if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO)
> +		return -EINVAL;
> +	mutex_lock(&data->mutex);
> +	switch (chan->type) {
> +	case IIO_TEMP:
> +		data->temp_osr_index = find_closest_descending(val,
> +			hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates));
> +		break;
> +	case IIO_PRESSURE:
> +		data->pres_osr_index = find_closest_descending(val,
> +			hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates));
> +		break;
> +	default:
> +		ret = -EINVAL;
> +	}
> +	mutex_unlock(&data->mutex);
> +	return ret;
> +}
> +
> +static const struct iio_chan_spec hp206c_channels[] = {
> +	{
> +		.type = IIO_TEMP,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +				      BIT(IIO_CHAN_INFO_SCALE) |
> +				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> +	},
> +	{
> +		.type = IIO_PRESSURE,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +				      BIT(IIO_CHAN_INFO_SCALE) |
> +				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> +	}
> +};
> +
> +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(hp206c_osr_rates_str);
> +
> +static struct attribute *hp206c_attributes[] = {
> +	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group hp206c_attribute_group = {
> +	.attrs = hp206c_attributes,
> +};
> +
> +static const struct iio_info hp206c_info = {
> +	.attrs = &hp206c_attribute_group,
> +	.read_raw = hp206c_read_raw,
> +	.write_raw = hp206c_write_raw,
> +	.driver_module = THIS_MODULE,
> +};
> +
> +static int hp206c_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct iio_dev *indio_dev;
> +	struct hp206c_data *data;
> +	int ret;
> +
> +	if (!i2c_check_functionality(client->adapter,
> +				     I2C_FUNC_SMBUS_BYTE |
> +				     I2C_FUNC_SMBUS_BYTE_DATA |
> +				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
> +		dev_err(&client->dev, "Adapter does not support "
> +				"all required i2c functionality\n");
> +		return -ENODEV;
> +	}
> +
> +	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	data->client = client;
> +	mutex_init(&data->mutex);
> +
> +	indio_dev->info = &hp206c_info;
> +	indio_dev->name = id->name;
> +	indio_dev->dev.parent = &client->dev;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->channels = hp206c_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(hp206c_channels);
> +
> +	i2c_set_clientdata(client, indio_dev);
> +
> +	/* Do a soft reset on probe */
> +	ret = hp206c_soft_reset(indio_dev);
> +	if (ret) {
> +		dev_err(&client->dev, "Failed to reset on startup: %d\n", ret);
> +		return -ENODEV;
> +	}
> +
> +	return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
> +static const struct i2c_device_id hp206c_id[] = {
> +	{"hp206c"},
> +	{}
> +};
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id hp206c_acpi_match[] = {
> +	{"HOP206C", 0},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match);
> +#endif
> +
> +static struct i2c_driver hp206c_driver = {
> +	.probe = hp206c_probe,
> +	.id_table = hp206c_id,
> +	.driver = {
> +		.name = "hp206c",
> +		.acpi_match_table = ACPI_PTR(hp206c_acpi_match),
> +	},
> +};
> +
> +module_i2c_driver(hp206c_driver);
> +
> +MODULE_DESCRIPTION("HOPERF HP206C precision barometer and altimeter sensor");
> +MODULE_AUTHOR("Leonard Crestez <leonard.crestez@xxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
>