RE: [PATCH 3/3] phy: rcar-gen3-usb2: add extcon support

From: Yoshihiro Shimoda
Date: Tue Apr 05 2016 - 05:56:47 EST


Hi Kishon,

Would you review this patch set?
As I said on the cover letter, this patch set is based on some patches.
http://thread.gmane.org/gmane.linux.drivers.devicetree/158563


Hi Chanwoo,

Thank you very much for the review about extcon usage!

Best regards,
Yoshihiro Shimoda

> From: Chanwoo Choi [mailto:cw00.choi@xxxxxxxxxxx]
> Sent: Monday, March 14, 2016 12:36 PM
>
> Hi Yoshihiro,
>
> On 2016ë 03ì 03ì 19:09, Yoshihiro Shimoda wrote:
> > This patch adds extcon support for otg related channel.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> > drivers/phy/Kconfig | 1 +
> > drivers/phy/phy-rcar-gen3-usb2.c | 26 ++++++++++++++++++++++++++
> > 2 files changed, 27 insertions(+)
> >
> > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> > index ba68f14..db57d6c 100644
> > --- a/drivers/phy/Kconfig
> > +++ b/drivers/phy/Kconfig
> > @@ -121,6 +121,7 @@ config PHY_RCAR_GEN2
> > config PHY_RCAR_GEN3_USB2
> > tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
> > depends on OF && ARCH_RENESAS
> > + depends on EXTCON
> > select GENERIC_PHY
> > help
> > Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
> > diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
> > index 7b14244..76bb88f 100644
> > --- a/drivers/phy/phy-rcar-gen3-usb2.c
> > +++ b/drivers/phy/phy-rcar-gen3-usb2.c
> > @@ -12,6 +12,7 @@
> > * published by the Free Software Foundation.
> > */
> >
> > +#include <linux/extcon.h>
> > #include <linux/interrupt.h>
> > #include <linux/io.h>
> > #include <linux/module.h>
> > @@ -77,6 +78,7 @@
> >
> > struct rcar_gen3_chan {
> > void __iomem *base;
> > + struct extcon_dev *extcon;
> > struct phy *phy;
> > struct regulator *vbus;
> > bool has_otg;
> > @@ -127,6 +129,9 @@ static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
> > rcar_gen3_set_linectrl(ch, 1, 1);
> > rcar_gen3_set_host_mode(ch, 1);
> > rcar_gen3_enable_vbus_ctrl(ch, 1);
> > +
> > + extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, true);
> > + extcon_set_cable_state_(ch->extcon, EXTCON_USB, false);
> > }
> >
> > static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
> > @@ -134,6 +139,9 @@ static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
> > rcar_gen3_set_linectrl(ch, 0, 1);
> > rcar_gen3_set_host_mode(ch, 0);
> > rcar_gen3_enable_vbus_ctrl(ch, 0);
> > +
> > + extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, false);
> > + extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
> > }
> >
> > static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
> > @@ -272,6 +280,12 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
> > };
> > MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
> >
> > +static const unsigned int rcar_gen3_phy_cable[] = {
> > + EXTCON_USB,
> > + EXTCON_USB_HOST,
> > + EXTCON_NONE,
> > +};
> > +
> > static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
> > {
> > struct device *dev = &pdev->dev;
> > @@ -297,11 +311,23 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
> > /* call request_irq for OTG */
> > irq = platform_get_irq(pdev, 0);
> > if (irq >= 0) {
> > + int ret;
> > +
> > irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
> > IRQF_SHARED, dev_name(dev), channel);
> > if (irq < 0)
> > dev_err(dev, "No irq handler (%d)\n", irq);
> > channel->has_otg = true;
> > + channel->extcon = devm_extcon_dev_allocate(dev,
> > + rcar_gen3_phy_cable);
> > + if (IS_ERR(channel->extcon))
> > + return PTR_ERR(channel->extcon);
> > +
> > + ret = devm_extcon_dev_register(dev, channel->extcon);
> > + if (ret < 0) {
> > + dev_err(dev, "Failed to register extcon\n");
> > + return ret;
> > + }
> > }
> >
> > /* devm_phy_create() will call pm_runtime_enable(dev); */
> >
>
> Looks good to me about extcon usgae.
>
> Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>
> Best Regards,
> Chanwoo Choi