Re: [PATCH v6 02/10] usb: dwc3: omap: Make the wrapper interrupt shared

From: Felipe Balbi
Date: Mon Apr 11 2016 - 08:15:48 EST



Hi,

Roger Quadros <rogerq@xxxxxx> writes:
> The wrapper interrupt is shared with OTG core so mark it IRQF_SHARED.
>
> Use request_threaded_irq() to ensure that irqflags match for the
> shared interrupt handlers. If we don't use request_treaded_irq() then
> forced threaded irq will set IRQF_ONESHOT and this won't match with
> the OTG irq handler.

then it seems you need to _first_ fix the OTG IRQ handler. Why does it
defer ? At a minimum, first switch to threaded IRQ handler, then (in
another patch) switch to IRQF_SHARED

> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> ---
> drivers/usb/dwc3/dwc3-omap.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
> index 22e9606..51ca098 100644
> --- a/drivers/usb/dwc3/dwc3-omap.c
> +++ b/drivers/usb/dwc3/dwc3-omap.c
> @@ -274,19 +274,25 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
> {
> struct dwc3_omap *omap = _omap;
> u32 reg;
> + int ret = IRQ_NONE;
>
> reg = dwc3_omap_read_irqmisc_status(omap);
>
> + if (reg)
> + ret = IRQ_HANDLED;

you can avoid the local variable by returning early here.

if (!reg)
return IRQ_NONE;

> if (reg & USBOTGSS_IRQMISC_DMADISABLECLR)
> omap->dma_status = false;
>
> dwc3_omap_write_irqmisc_status(omap, reg);
>
> reg = dwc3_omap_read_irq0_status(omap);
> + if (reg)
> + ret = IRQ_HANDLED;

and this check is probably unnecessary.

> @@ -506,8 +512,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
> reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
> omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);
>
> - ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
> - "dwc3-omap", omap);
> + ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,

this switch to threaded IRQ is not part of $subject.

--
balbi

Attachment: signature.asc
Description: PGP signature