Re: [PATCH 6/7] pinctrl: tegra: Add DT binding for io pads control

[Laxman Dewangan]

On Friday 15 April 2016 09:15 PM, Jon Hunter wrote:
> On 15/04/16 16:14, Laxman Dewangan wrote:
> > I used pins as this is the property from pincon generic so that I can
> > use the generic implementation.
> >
> > Here, I will not go to the pin level control as HW does not support pin
> > level control.
> >
> > I will say the unit should be interface level. Should we say
> > IO_GROUP_CSIA, IO_GROUP_CSIB etc?
> So we need to reflect the hardware in device-tree and although yes the
> power-down for the CSI_x_xxx pads are all controlled together as a
> single group, it does not feel right that we add a pseudo pin called
> csix to represent these.
>
> The CSI_x_xxx pads are already in device-tree and so why not add a
> property to each of these pads which has the IO rail information for
> power-down and voltage-select?

Which dt binding docs have these?
I looked for nvidia,tegra210-pinmux.txt and not able to find csi_xxx.

Here I dont want to refer the individual pins as control should be as group.