[RFC v2] iio: st_sensors: Add lsm9ds0-accel and lsm9ds0-magn support

From: Crestez Dan Leonard
Date: Tue Apr 19 2016 - 08:24:42 EST

Next message: Bart Van Assche: "Re: [PATCH] irq_poll: Remove redundant barrier when using clear_bit_unlock()"
Previous message: Rui Salvaterra: "[PATCH] powerpc: wire up preadv2 and pwritev2 syscalls"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Because these devices shared the same I2C address/SPI chipselect they can't be
used at the same time.

The proper way to do this is as a single iio device but that requires
larger changes to st_sensors infrastructure.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
---

I'm only posting this as a reference point. When a combo device is supported it
won't make sense to also support the -accel and -magn parts separately. So it
would be better if this support never makes it upstream.

Changes since v1:
* Fix ST_MAGN_4_DRDY_INT_MASK value
* Mention device ids are also mentioned in Kconfig

.../devicetree/bindings/iio/st-sensors.txt | 2 +
drivers/iio/accel/Kconfig | 3 +-
drivers/iio/accel/st_accel.h | 1 +
drivers/iio/accel/st_accel_core.c | 122 ++++++++++++++++++++
drivers/iio/accel/st_accel_i2c.c | 5 +
drivers/iio/accel/st_accel_spi.c | 1 +
drivers/iio/magnetometer/Kconfig | 2 +-
drivers/iio/magnetometer/st_magn.h | 1 +
drivers/iio/magnetometer/st_magn_core.c | 123 +++++++++++++++++++++
drivers/iio/magnetometer/st_magn_i2c.c | 5 +
drivers/iio/magnetometer/st_magn_spi.c | 1 +
11 files changed, 264 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 5844cf7..511c550 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -42,6 +42,7 @@ Accelerometers:
- st,lsm303agr-accel
- st,lis2dh12-accel
- st,h3lis331dl-accel
+- st,lsm9ds0-accel

Gyroscopes:
- st,l3g4200d-gyro
@@ -59,6 +60,7 @@ Magnetometers:
- st,lsm303dlhc-magn
- st,lsm303dlm-magn
- st,lis3mdl-magn
+- st,lsm9ds0-magn

Pressure sensors:
- st,lps001wp-press
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index e4a758c..cbbed00 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -64,7 +64,8 @@ config IIO_ST_ACCEL_3AXIS
help
Say yes here to build support for STMicroelectronics accelerometers:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
- LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL.
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
+ LSM9DS0.

This driver can also be built as a module. If so, these modules
will be created:
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 57f83a6..e90cd6a 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -29,6 +29,7 @@
#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
#define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel"
#define LIS2DH12_ACCEL_DEV_NAME "lis2dh12_accel"
+#define LSM9DS0_ACCEL_DEV_NAME "lsm9ds0_accel"

/**
* struct st_sensors_platform_data - default accel platform data
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index dc73f2d..ee4b373 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -215,6 +215,50 @@
#define ST_ACCEL_6_IHL_IRQ_MASK 0x80
#define ST_ACCEL_6_MULTIREAD_BIT true

+/* CUSTOM VALUES FOR SENSOR 7 */
+#define ST_ACCEL_7_WAI_EXP 0x49
+#define ST_ACCEL_7_ODR_ADDR 0x20
+#define ST_ACCEL_7_ODR_MASK 0xf0
+#define ST_ACCEL_7_ODR_AVL_3HZ_VAL 0x01
+#define ST_ACCEL_7_ODR_AVL_6HZ_VAL 0x02
+#define ST_ACCEL_7_ODR_AVL_12HZ_VAL 0x03
+#define ST_ACCEL_7_ODR_AVL_25HZ_VAL 0x04
+#define ST_ACCEL_7_ODR_AVL_50HZ_VAL 0x05
+#define ST_ACCEL_7_ODR_AVL_100HZ_VAL 0x06
+#define ST_ACCEL_7_ODR_AVL_200HZ_VAL 0x07
+#define ST_ACCEL_7_ODR_AVL_400HZ_VAL 0x08
+#define ST_ACCEL_7_ODR_AVL_800HZ_VAL 0x09
+#define ST_ACCEL_7_ODR_AVL_1600HZ_VAL 0x0a
+#define ST_ACCEL_7_FS_ADDR 0x21
+#define ST_ACCEL_7_FS_MASK 0x38
+#define ST_ACCEL_7_FS_AVL_2_VAL 0x00
+#define ST_ACCEL_7_FS_AVL_4_VAL 0x01
+#define ST_ACCEL_7_FS_AVL_6_VAL 0x02
+#define ST_ACCEL_7_FS_AVL_8_VAL 0x03
+#define ST_ACCEL_7_FS_AVL_16_VAL 0x04
+#define ST_ACCEL_7_FS_AVL_2_GAIN IIO_G_TO_M_S_2(61)
+#define ST_ACCEL_7_FS_AVL_4_GAIN IIO_G_TO_M_S_2(122)
+#define ST_ACCEL_7_FS_AVL_6_GAIN IIO_G_TO_M_S_2(183)
+#define ST_ACCEL_7_FS_AVL_8_GAIN IIO_G_TO_M_S_2(244)
+#define ST_ACCEL_7_FS_AVL_16_GAIN IIO_G_TO_M_S_2(732)
+#define ST_ACCEL_7_BDU_ADDR 0x20
+#define ST_ACCEL_7_BDU_MASK 0x08
+#define ST_ACCEL_7_DRDY_IRQ_ADDR 0x22
+#define ST_ACCEL_7_DRDY_IRQ_INT1_MASK 0x04
+/* INT2 is actually at another address. Not supported by driver */
+/*
+#define ST_ACCEL_7_DRDY_IRQ_INT2_ADDR 0x23
+#define ST_ACCEL_7_DRDY_IRQ_INT2_MASK 0x08
+ */
+/* Common to magnetometer so not supported */
+/*
+#define ST_ACCEL_7_IHL_IRQ_ADDR 0x12
+#define ST_ACCEL_7_IHL_IRQ_MASK 0x80
+ */
+#define ST_ACCEL_7_IG1_EN_ADDR 0x22
+#define ST_ACCEL_7_IG1_EN_MASK 0x20
+#define ST_ACCEL_7_MULTIREAD_BIT true
+
static const struct iio_chan_spec st_accel_8bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -662,6 +706,84 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.multi_read_bit = ST_ACCEL_6_MULTIREAD_BIT,
.bootime = 2,
},
+ {
+ .wai = ST_ACCEL_7_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+ .sensors_supported = {
+ [0] = LSM9DS0_ACCEL_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+ .odr = {
+ .addr = ST_ACCEL_7_ODR_ADDR,
+ .mask = ST_ACCEL_7_ODR_MASK,
+ .odr_avl = {
+ { 3, ST_ACCEL_7_ODR_AVL_3HZ_VAL },
+ { 6, ST_ACCEL_7_ODR_AVL_6HZ_VAL, },
+ { 12, ST_ACCEL_7_ODR_AVL_12HZ_VAL, },
+ { 25, ST_ACCEL_7_ODR_AVL_25HZ_VAL, },
+ { 50, ST_ACCEL_7_ODR_AVL_50HZ_VAL, },
+ { 100, ST_ACCEL_7_ODR_AVL_100HZ_VAL, },
+ { 200, ST_ACCEL_7_ODR_AVL_200HZ_VAL, },
+ { 400, ST_ACCEL_7_ODR_AVL_400HZ_VAL, },
+ { 800, ST_ACCEL_7_ODR_AVL_800HZ_VAL, },
+ { 1600, ST_ACCEL_7_ODR_AVL_1600HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_ACCEL_7_ODR_ADDR,
+ .mask = ST_ACCEL_7_ODR_MASK,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = ST_ACCEL_7_FS_ADDR,
+ .mask = ST_ACCEL_7_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_ACCEL_FS_AVL_2G,
+ .value = ST_ACCEL_7_FS_AVL_2_VAL,
+ .gain = ST_ACCEL_7_FS_AVL_2_GAIN,
+ },
+ [1] = {
+ .num = ST_ACCEL_FS_AVL_4G,
+ .value = ST_ACCEL_7_FS_AVL_4_VAL,
+ .gain = ST_ACCEL_7_FS_AVL_4_GAIN,
+ },
+ [2] = {
+ .num = ST_ACCEL_FS_AVL_6G,
+ .value = ST_ACCEL_7_FS_AVL_6_VAL,
+ .gain = ST_ACCEL_7_FS_AVL_6_GAIN,
+ },
+ [3] = {
+ .num = ST_ACCEL_FS_AVL_8G,
+ .value = ST_ACCEL_7_FS_AVL_8_VAL,
+ .gain = ST_ACCEL_7_FS_AVL_8_GAIN,
+ },
+ [4] = {
+ .num = ST_ACCEL_FS_AVL_16G,
+ .value = ST_ACCEL_7_FS_AVL_16_VAL,
+ .gain = ST_ACCEL_7_FS_AVL_16_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_ACCEL_7_BDU_ADDR,
+ .mask = ST_ACCEL_7_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_ACCEL_7_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_ACCEL_7_DRDY_IRQ_INT1_MASK,
+ .ig1 = {
+ .en_addr = ST_ACCEL_7_IG1_EN_ADDR,
+ .en_mask = ST_ACCEL_7_IG1_EN_MASK,
+ },
+ },
+ .multi_read_bit = ST_ACCEL_7_MULTIREAD_BIT,
+ .bootime = 2,
+ },
};

static int st_accel_read_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 7333ee9..7a2a3ab 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -80,6 +80,10 @@ static const struct of_device_id st_accel_of_match[] = {
.compatible = "st,h3lis331dl-accel",
.data = H3LIS331DL_DRIVER_NAME,
},
+ {
+ .compatible = "st,lsm9ds0-accel",
+ .data = LSM9DS0_ACCEL_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -130,6 +134,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
{ LSM330_ACCEL_DEV_NAME },
{ LSM303AGR_ACCEL_DEV_NAME },
{ LIS2DH12_ACCEL_DEV_NAME },
+ { LSM9DS0_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index fcd5847..2fc32c92f 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -59,6 +59,7 @@ static const struct spi_device_id st_accel_id_table[] = {
{ LSM330_ACCEL_DEV_NAME },
{ LSM303AGR_ACCEL_DEV_NAME },
{ LIS2DH12_ACCEL_DEV_NAME },
+ { LSM9DS0_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_accel_id_table);
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 84e6559..e0ba94f6 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -106,7 +106,7 @@ config IIO_ST_MAGN_3AXIS
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics magnetometers:
- LSM303DLHC, LSM303DLM, LIS3MDL.
+ LSM303DLHC, LSM303DLM, LIS3MDL, LSM9DS0.

This driver can also be built as a module. If so, these modules
will be created:
diff --git a/drivers/iio/magnetometer/st_magn.h b/drivers/iio/magnetometer/st_magn.h
index 06a4d9c..2176064 100644
--- a/drivers/iio/magnetometer/st_magn.h
+++ b/drivers/iio/magnetometer/st_magn.h
@@ -19,6 +19,7 @@
#define LSM303DLM_MAGN_DEV_NAME "lsm303dlm_magn"
#define LIS3MDL_MAGN_DEV_NAME "lis3mdl"
#define LSM303AGR_MAGN_DEV_NAME "lsm303agr_magn"
+#define LSM9DS0_MAGN_DEV_NAME "lsm9ds0_magn"

int st_magn_common_probe(struct iio_dev *indio_dev);
void st_magn_common_remove(struct iio_dev *indio_dev);
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 62036d2..e8ab1ac 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -36,6 +36,7 @@
/* FULLSCALE */
#define ST_MAGN_FS_AVL_1300MG 1300
#define ST_MAGN_FS_AVL_1900MG 1900
+#define ST_MAGN_FS_AVL_2000MG 2000
#define ST_MAGN_FS_AVL_2500MG 2500
#define ST_MAGN_FS_AVL_4000MG 4000
#define ST_MAGN_FS_AVL_4700MG 4700
@@ -183,6 +184,50 @@
#define ST_MAGN_3_OUT_Y_L_ADDR 0x6a
#define ST_MAGN_3_OUT_Z_L_ADDR 0x6c

+/* CUSTOM VALUES FOR SENSOR 4 */
+#define ST_MAGN_4_WAI_EXP 0x49
+#define ST_MAGN_4_ODR_ADDR 0x24
+#define ST_MAGN_4_ODR_MASK 0x1c
+#define ST_MAGN_4_ODR_AVL_3HZ_VAL 0x00
+#define ST_MAGN_4_ODR_AVL_6HZ_VAL 0x01
+#define ST_MAGN_4_ODR_AVL_12HZ_VAL 0x02
+#define ST_MAGN_4_ODR_AVL_25HZ_VAL 0x03
+#define ST_MAGN_4_ODR_AVL_50HZ_VAL 0x04
+#define ST_MAGN_4_ODR_AVL_100HZ_VAL 0x05
+#define ST_MAGN_4_PW_ADDR 0x26
+#define ST_MAGN_4_PW_MASK 0x03
+#define ST_MAGN_4_PW_ON 0x00
+#define ST_MAGN_4_PW_OFF 0x03
+#define ST_MAGN_4_FS_ADDR 0x25
+#define ST_MAGN_4_FS_MASK 0x60
+#define ST_MAGN_4_FS_AVL_2000_VAL 0x00
+#define ST_MAGN_4_FS_AVL_4000_VAL 0x01
+#define ST_MAGN_4_FS_AVL_8000_VAL 0x02
+#define ST_MAGN_4_FS_AVL_12000_VAL 0x03
+#define ST_MAGN_4_FS_AVL_2000_GAIN 73
+#define ST_MAGN_4_FS_AVL_4000_GAIN 146
+#define ST_MAGN_4_FS_AVL_8000_GAIN 292
+#define ST_MAGN_4_FS_AVL_12000_GAIN 438
+/* Shared with accelerometer */
+#define ST_MAGN_4_BDU_ADDR 0x20
+#define ST_MAGN_4_BDU_MASK 0x08
+#define ST_MAGN_4_DRDY_IRQ_ADDR 0x22
+#define ST_MAGN_4_DRDY_INT_MASK 0x02
+/* INT2 is actually at another address. Not supported by driver */
+/*
+#define ST_MAGN_4_DRDY_IRQ_INT2_ADDR 0x23
+#define ST_MAGN_4_DRDY_IRQ_INT2_MASK 0x04
+ */
+/* Common to accelerometer so not supported */
+/*
+#define ST_MAGN_4_IHL_IRQ_ADDR 0x12
+#define ST_MAGN_4_IHL_IRQ_MASK 0x80
+ */
+#define ST_MAGN_4_MULTIREAD_BIT true
+#define ST_MAGN_4_OUT_X_L_ADDR 0x08
+#define ST_MAGN_4_OUT_Y_L_ADDR 0x0a
+#define ST_MAGN_4_OUT_Z_L_ADDR 0x0c
+
static const struct iio_chan_spec st_magn_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -231,6 +276,22 @@ static const struct iio_chan_spec st_magn_3_16bit_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3)
};

+static const struct iio_chan_spec st_magn_4_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+ ST_MAGN_4_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+ ST_MAGN_4_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+ ST_MAGN_4_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
static const struct st_sensor_settings st_magn_sensors_settings[] = {
{
.wai = 0, /* This sensor has no valid WhoAmI report 0 */
@@ -489,6 +550,68 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
.multi_read_bit = ST_MAGN_3_MULTIREAD_BIT,
.bootime = 2,
},
+ {
+ .wai = ST_MAGN_4_WAI_EXP,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+ .sensors_supported = {
+ [0] = LSM9DS0_MAGN_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_magn_4_16bit_channels,
+ .odr = {
+ .addr = ST_MAGN_4_ODR_ADDR,
+ .mask = ST_MAGN_4_ODR_MASK,
+ .odr_avl = {
+ { 3, ST_MAGN_4_ODR_AVL_3HZ_VAL, },
+ { 6, ST_MAGN_4_ODR_AVL_6HZ_VAL, },
+ { 12, ST_MAGN_4_ODR_AVL_12HZ_VAL, },
+ { 25, ST_MAGN_4_ODR_AVL_25HZ_VAL, },
+ { 50, ST_MAGN_4_ODR_AVL_50HZ_VAL, },
+ { 100, ST_MAGN_4_ODR_AVL_100HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_MAGN_4_PW_ADDR,
+ .mask = ST_MAGN_4_PW_MASK,
+ .value_on = ST_MAGN_4_PW_ON,
+ .value_off = ST_MAGN_4_PW_OFF,
+ },
+ .fs = {
+ .addr = ST_MAGN_4_FS_ADDR,
+ .mask = ST_MAGN_4_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_MAGN_FS_AVL_2000MG,
+ .value = ST_MAGN_4_FS_AVL_2000_VAL,
+ .gain = ST_MAGN_4_FS_AVL_2000_GAIN,
+ },
+ [1] = {
+ .num = ST_MAGN_FS_AVL_4000MG,
+ .value = ST_MAGN_4_FS_AVL_4000_VAL,
+ .gain = ST_MAGN_4_FS_AVL_4000_GAIN,
+ },
+ [2] = {
+ .num = ST_MAGN_FS_AVL_8000MG,
+ .value = ST_MAGN_4_FS_AVL_8000_VAL,
+ .gain = ST_MAGN_4_FS_AVL_8000_GAIN,
+ },
+ [3] = {
+ .num = ST_MAGN_FS_AVL_12000MG,
+ .value = ST_MAGN_4_FS_AVL_12000_VAL,
+ .gain = ST_MAGN_4_FS_AVL_12000_GAIN,
+ },
+ },
+ },
+ .bdu = {
+ .addr = ST_MAGN_4_BDU_ADDR,
+ .mask = ST_MAGN_4_BDU_MASK,
+ },
+ .drdy_irq = {
+ .addr = ST_MAGN_4_DRDY_IRQ_ADDR,
+ .mask_int1 = ST_MAGN_4_DRDY_INT_MASK,
+ },
+ .multi_read_bit = ST_MAGN_4_MULTIREAD_BIT,
+ .bootime = 2,
+ },
};

static int st_magn_read_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/magnetometer/st_magn_i2c.c b/drivers/iio/magnetometer/st_magn_i2c.c
index 8aa37af..1c7c487 100644
--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -40,6 +40,10 @@ static const struct of_device_id st_magn_of_match[] = {
.compatible = "st,lsm303agr-magn",
.data = LSM303AGR_MAGN_DEV_NAME,
},
+ {
+ .compatible = "st,lsm9ds0-magn",
+ .data = LSM9DS0_MAGN_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_magn_of_match);
@@ -84,6 +88,7 @@ static const struct i2c_device_id st_magn_id_table[] = {
{ LSM303DLM_MAGN_DEV_NAME },
{ LIS3MDL_MAGN_DEV_NAME },
{ LSM303AGR_MAGN_DEV_NAME },
+ { LSM9DS0_MAGN_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_magn_id_table);
diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index 6325e7d..8c4e1d6 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -52,6 +52,7 @@ static const struct spi_device_id st_magn_id_table[] = {
{ LSM303DLM_MAGN_DEV_NAME },
{ LIS3MDL_MAGN_DEV_NAME },
{ LSM303AGR_MAGN_DEV_NAME },
+ { LSM9DS0_MAGN_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_magn_id_table);
--
2.5.5

Next message: Bart Van Assche: "Re: [PATCH] irq_poll: Remove redundant barrier when using clear_bit_unlock()"
Previous message: Rui Salvaterra: "[PATCH] powerpc: wire up preadv2 and pwritev2 syscalls"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]