[RESEND PATCH 5/8] thermal: rockchip: Support RK3366 SoCs in the thermal driver

From: Caesar Wang
Date: Fri Apr 22 2016 - 06:03:35 EST


From: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>

The RK3366 SoCs have two Temperature Sensors, channel 0 is for CPU
channel 1 is for GPU.

Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
---

drivers/thermal/rockchip_thermal.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 6436c00..3f1e5d4 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -685,6 +685,30 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
},
};

+static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
+ .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+ .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+ .chn_num = 2, /* two channels for tsadc */
+
+ .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+ .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+ .tshut_temp = 95000,
+
+ .initialize = rk_tsadcv3_initialize,
+ .irq_ack = rk_tsadcv3_irq_ack,
+ .control = rk_tsadcv3_control,
+ .get_temp = rk_tsadcv2_get_temp,
+ .set_tshut_temp = rk_tsadcv2_tshut_temp,
+ .set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+ .table = {
+ .id = rk3228_code_table,
+ .length = ARRAY_SIZE(rk3228_code_table),
+ .data_mask = TSADCV3_DATA_MASK,
+ .mode = ADC_INCREMENT,
+ },
+};
+
static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
@@ -743,6 +767,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
.data = (void *)&rk3288_tsadc_data,
},
{
+ .compatible = "rockchip,rk3366-tsadc",
+ .data = (void *)&rk3366_tsadc_data,
+ },
+ {
.compatible = "rockchip,rk3368-tsadc",
.data = (void *)&rk3368_tsadc_data,
},
--
1.9.1