Re: [PATCH] iio: tmp006: Set correct iio name

From: Jonathan Cameron
Date: Mon Apr 25 2016 - 15:33:58 EST


On 22/04/16 04:43, Yong Li wrote:
> When load the driver using the below command:
> echo tmp006 0x40 > /sys/bus/i2c/devices/i2c-0/new_device
>
> In sysfs, the i2c name is tmp006, however the iio name is 0-0040,
> they are inconsistent. With this patch,
> the iio name will be the same as the i2c device name
>
> Signed-off-by: Yong Li <sdliyong@xxxxxxxxx>
Peter, this looks right to me, but could you take a quick look as I guess
there might be a reason you did this in an unusual way originally?

Jonathan
> ---
> drivers/iio/temperature/tmp006.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c
> index 18c9b43..17c8413 100644
> --- a/drivers/iio/temperature/tmp006.c
> +++ b/drivers/iio/temperature/tmp006.c
> @@ -221,7 +221,7 @@ static int tmp006_probe(struct i2c_client *client,
> data->client = client;
>
> indio_dev->dev.parent = &client->dev;
> - indio_dev->name = dev_name(&client->dev);
> + indio_dev->name = id->name;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->info = &tmp006_info;
>
>