[PATCH v3 09/11] serial: 8250_lpss: move Quark code from PCI driver

From: Andy Shevchenko
Date: Wed Apr 27 2016 - 09:49:20 EST


Intel Quark has DesignWare UART. Move the code from 8250_pci to 8250_lpss.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_lpss.c | 11 +++++++++++
drivers/tty/serial/8250/8250_pci.c | 15 +--------------
2 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 3112e8b..af34189 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -25,6 +25,8 @@
#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a
#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c

+#define PCI_DEVICE_ID_INTEL_QRK_UARTx 0x0936
+
#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3
#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4

@@ -152,6 +154,9 @@ static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port
struct dw_dma_slave *rx_param, *tx_param;
struct device *dev = port->port.dev;

+ if (!lpss->dma_param.dma_dev)
+ return 0;
+
rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
if (!rx_param)
return -ENOMEM;
@@ -239,6 +244,11 @@ static const struct lpss8250_board byt_board = {
.setup = byt_serial_setup,
};

+static const struct lpss8250_board qrk_board = {
+ .freq = 44236800,
+ .base_baud = 2764800,
+};
+
#define LPSS_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board }

static const struct pci_device_id pci_ids[] = {
@@ -246,6 +256,7 @@ static const struct pci_device_id pci_ids[] = {
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BYT_UART2, byt_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BSW_UART1, byt_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BSW_UART2, byt_board),
+ LPSS_DEVICE(PCI_DEVICE_ID_INTEL_QRK_UARTx, qrk_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BDW_UART1, byt_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BDW_UART2, byt_board),
{ },
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index bb4df5d..b94b1ee 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1765,7 +1765,6 @@ pci_wch_ch38x_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
#define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
-#define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936

#define PCI_VENDOR_ID_SUNIX 0x1fd4
#define PCI_DEVICE_ID_SUNIX_1999 0x1999
@@ -2736,7 +2735,6 @@ enum pci_board_num_t {
pbn_ADDIDATA_PCIe_4_3906250,
pbn_ADDIDATA_PCIe_8_3906250,
pbn_ce4100_1_115200,
- pbn_qrk,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
pbn_brcm_trumanage,
@@ -3512,12 +3510,6 @@ static struct pciserial_board pci_boards[] = {
.base_baud = 921600,
.reg_shift = 2,
},
- [pbn_qrk] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 2764800,
- .reg_shift = 2,
- },
[pbn_omegapci] = {
.flags = FL_BASE0,
.num_ports = 8,
@@ -3634,6 +3626,7 @@ static const struct pci_device_id blacklist[] = {
{ PCI_VDEVICE(INTEL, 0x0f0c), },
{ PCI_VDEVICE(INTEL, 0x228a), },
{ PCI_VDEVICE(INTEL, 0x228c), },
+ { PCI_VDEVICE(INTEL, 0x0936), },
{ PCI_VDEVICE(INTEL, 0x9ce3), },
{ PCI_VDEVICE(INTEL, 0x9ce4), },
};
@@ -5303,12 +5296,6 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_ce4100_1_115200 },

/*
- * Intel Quark x1000
- */
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_qrk },
- /*
* Cronyx Omega PCI
*/
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
--
2.8.0.rc3