Re: [PATCH v2 5/5] usb: dwc3: rockchip: add devicetree bindings documentation

From: Felipe Balbi
Date: Wed May 25 2016 - 04:06:39 EST



Hi,

William Wu <william.wu@xxxxxxxxxxxxxx> writes:
> Hi Felipe,
>
> On 05/24/2016 05:32 PM, Felipe Balbi wrote:
>> Hi,
>>
>> William Wu <william.wu@xxxxxxxxxxxxxx> writes:
>>> This patch documents the device tree documentation required for
>>> Rockchip USB3.0 core wrapper consist of USB3.0 IP from Synopsys.
>>>
>>> It could operate in device mode (SS, HS, FS) and host
>>> mode (SS, HS, FS, LS).
>>>
>>> Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
>>> ---
>>> Changes in v2:
>>> - add rockchip,dwc3.txt to Documentation/devicetree/bindings/ (Felipe, Brian)
>>>
>>> .../devicetree/bindings/usb/rockchip,dwc3.txt | 45 ++++++++++++++++++++++
>>> 1 file changed, 45 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>>> new file mode 100644
>>> index 0000000..10303d9
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>>> @@ -0,0 +1,45 @@
>>> +Rockchip SuperSpeed DWC3 USB SoC controller
>>> +
>>> +Required properties:
>>> +- compatible: should contain "rockchip,dwc3"
>>> +- clocks: A list of phandle + clock-specifier pairs for the
>>> + clocks listed in clock-names
>>> +- clock-names: Should contain the following:
>>> + "clk_usb3otg0_ref" Controller reference clk
>>> + "clk_usb3otg0_suspend"Controller suspend clk, can use 24 MHz or 32 KHz
>>> + "aclk_usb3" Master/Core clock, have to be >= 62.5 MHz for SS operation
>>> +
>>> +
>>> +Optional clocks:
>>> + "aclk_usb3otg0" Aclk for specific usb controller clock.
>>> + "aclk_usb3_rksoc_axi_perf" USB AXI perf clock. Not present on all platforms.
>>> + "aclk_usb3_grf" USB grf clock. Not present on all platforms.
>>> +
>>> +Required child node:
>>> +A child node must exist to represent the core DWC3 IP block. The name of
>>> +the node is not important. The content of the node is defined in dwc3.txt.
>>> +
>>> +Phy documentation is provided in the following places:
>>> +
>>> +Example device nodes:
>>> +
>>> + usbdrd3_0: usb@fe800000 {
>>> +
>> no reg property?
> For now, we don't need reg property here. Because we only need to do
> enable some clocks and populate its children in
> drivers/usb/dwc3/dwc3-of-simple.c.
> And it's similar to arch/arm/boot/dts/exynos5420.dtsi usbdrd3_0 node.
>> compatible = "rockchip,dwc3";
>>> + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
>>> + <&cru ACLK_USB3>, <&cru ACLK_USB3OTG0>,
>>> + <&cru ACLK_USB3_RKSOC_AXI_PERF>, <&cru ACLK_USB3_GRF>;
>>> + clock-names = "clk_usb3otg0_ref", "clk_usb3otg0_suspend",
>>> + "aclk_usb3", "aclk_usb3otg0",
>>> + "aclk_usb3_rksoc_axi_perf", "aclk_usb3_grf";
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> + status = "disabled";
>>> + usbdrd_dwc3_0: dwc3 {
>> no address here?
> I think here don't necessarily need address. The child node dwc3 can
> inherit address from the parent node.
> And with this dtsi patch, the dev path show as follows:
> /sys/devices/platform/usb@fe800000/fe800000.dwc3
>
> Is it need for coding style or other reason?

I don't think your arguments match what devicetree folks want to see in
DT. Let's ask them. Rob, care to look at this one?

>
>>
>>> + compatible = "snps,dwc3";
>>> + reg = <0x0 0xfe800000 0x0 0x100000>;
>>> + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
>>> + dr_mode = "otg";
>>> + status = "disabled";
>>> + };
>>> + };
>>> --
>>> 1.9.1
>>>
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
balbi

Attachment: signature.asc
Description: PGP signature