[PATCH 1/2] freescale/dts: add pcie aer interrupt-name property in the dts
From: Po Liu
Date: Thu May 26 2016 - 02:43:37 EST
Freescale some platforms aer interrupt was not MSI/MSI-X/INTx
but using interrupt line independently. This patch add a "aer"
interrupt-names for aer interrupt.
Signed-off-by: Po Liu <po.liu@xxxxxxx>
---
.../devicetree/bindings/pci/layerscape-pci.txt | 2 +-
arch/arm/boot/dts/ls1021a.dtsi | 6 ++++--
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++---------
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 16 ++++++++--------
4 files changed, 22 insertions(+), 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index ef683b2..858b407 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -19,7 +19,7 @@ Required properties:
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
- interrupt-names: Must include the following entries:
- "intr": The interrupt that is asserted for controller interrupts
+ "aer" : The interrupt that is asserted for aer interrupts
- fsl,pcie-scfg: Must include two entries.
The first entry must be a link to the SCFG device node
The second entry must be '0' or '1' based on physical PCIe controller index.
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 5ae8e92..b638697 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -633,7 +633,8 @@
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
fsl,pcie-scfg = <&scfg 0>;
#address-cells = <3>;
#size-cells = <2>;
@@ -656,7 +657,8 @@
reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
fsl,pcie-scfg = <&scfg 1>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index de0323b..4beb760 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -473,9 +473,9 @@
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>, /* controller interrupt */
- <0 117 0x4>; /* PME interrupt */
- interrupt-names = "intr", "pme";
+ interrupts = <0 117 0x4>, /* PME interrupt */
+ <0 118 0x4>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -497,9 +497,9 @@
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 128 0x4>,
- <0 127 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 127 0x4>,
+ <0 128 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -521,9 +521,9 @@
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 162 0x4>,
- <0 161 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 161 0x4>,
+ <0 162 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 3187c82..6edf24b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -559,8 +559,8 @@
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x10 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 108 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 108 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -583,8 +583,8 @@
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x12 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 113 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 113 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -607,8 +607,8 @@
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x14 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 118 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -631,8 +631,8 @@
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
0x16 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 123 0x4>; /* Level high type */
- interrupt-names = "intr";
+ interrupts = <0 123 0x4>; /* aer interrupt */
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
--
2.1.0.27.g96db324