[PATCH v2 0/2] Add a new Rockchip usb2 phy driver

From: Frank Wang
Date: Thu Jun 02 2016 - 02:48:38 EST

The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.

These series patches add phy-rockchip-inno-usb2.c and the corresponding

Changes in v2:
- Specified more hardware-description into the devicetree bindings.
- Optimized some process of driver.

Frank Wang (2):
Documentation: bindings: add DT documentation for Rockchip USB2PHY
phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy

.../bindings/phy/phy-rockchip-inno-usb2.txt | 55 ++
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-inno-usb2.c | 604 ++++++++++++++++++++
4 files changed, 667 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c