Re: [PATCH v8 13/14] usb: gadget: udc: adapt to OTG core

From: Peter Chen
Date: Wed Jun 08 2016 - 05:12:04 EST

Next message: Catalin Marinas: "Re: [PATCH v2 4/9] arm64: Add platform selection for BCM2835."
Previous message: Laxman Dewangan: "Re: [PATCH] watchdog: max77620: Add support for watchdog timer"
In reply to: Roger Quadros: "Re: [PATCH v8 13/14] usb: gadget: udc: adapt to OTG core"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Jun 08, 2016 at 10:32:19AM +0300, Roger Quadros wrote:
> Hi,
>
> On 24/05/16 05:53, Peter Chen wrote:
> > On Mon, May 23, 2016 at 01:36:51PM +0300, Roger Quadros wrote:
> >> On 23/05/16 13:34, Jun Li wrote:
> >>> Hi
> >>>
> >>>> -----Original Message-----
> >>>> From: Roger Quadros [mailto:rogerq@xxxxxx]
> >>>> Sent: Monday, May 23, 2016 6:12 PM
> >>>> To: Peter Chen <hzpeterchen@xxxxxxxxx>
> >>>> Cc: Jun Li <jun.li@xxxxxxx>; peter.chen@xxxxxxxxxxxxx; balbi@xxxxxxxxxx;
> >>>> tony@xxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; dan.j.williams@xxxxxxxxx;
> >>>> mathias.nyman@xxxxxxxxxxxxxxx; Joao.Pinto@xxxxxxxxxxxx;
> >>>> sergei.shtylyov@xxxxxxxxxxxxxxxxxx; jun.li@xxxxxxxxxxxxx;
> >>>> grygorii.strashko@xxxxxx; yoshihiro.shimoda.uh@xxxxxxxxxxx;
> >>>> robh@xxxxxxxxxx; nsekhar@xxxxxx; b-liu@xxxxxx; linux-usb@xxxxxxxxxxxxxxx;
> >>>> linux-omap@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> >>>> devicetree@xxxxxxxxxxxxxxx
> >>>> Subject: Re: [PATCH v8 13/14] usb: gadget: udc: adapt to OTG core
> >>>>
> >>>> On 23/05/16 06:21, Peter Chen wrote:
> >>>>> On Sat, May 21, 2016 at 10:29:40AM +0800, Peter Chen wrote:
> >>>>>> On Thu, May 19, 2016 at 10:32:44AM +0300, Roger Quadros wrote:
> >>>>>>> On 18/05/16 17:46, Jun Li wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> I didn't want to have complex Kconfig so decided to have otg as
> >>>>>>>>>>> built-in only.
> >>>>>>>>>>> What do you want me to change in existing code? and why?
> >>>>>>>>>>
> >>>>>>>>>> Remove those stuff which only for pass diff driver config Like
> >>>>>>>>>> every controller driver need a duplicated
> >>>>>>>>>>
> >>>>>>>>>> static struct otg_hcd_ops ci_hcd_ops = {
> >>>>>>>>>> ...
> >>>>>>>>>> }
> >>>>>>>>>
> >>>>>>>>> This is an exception only. Every controller driver doesn't need to
> >>>>>>>>> implement hcd_ops. It is implemented in the hcd core.
> >>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> And here is another example, for gadget connect, otg driver can
> >>>>>>>>>> directly call to usb_udc_vbus_handler() in drd state machine, but
> >>>>>>>>>> you create another interface:
> >>>>>>>>>>
> >>>>>>>>>> .connect_control = usb_gadget_connect_control,
> >>>>>>>>>>
> >>>>>>>>>> If the symbol is defined in one driver which is 'm', another
> >>>>>>>>>> driver reference it should be 'm' as well, then there is no this
> >>>>>>>>>> kind of problem as my understanding.
> >>>>>>>>>
> >>>>>>>>> That is fine as long as all are 'm'. but how do you solve the case
> >>>>>>>>> when Gadget is built in and host is 'm'? OTG has to be built-in
> >>>>>>>>> and you will need an hcd to gadget interface.
> >>>>>>>>
> >>>>>>>> Hcd to gadget interface? Or you want to say otg to host interface?
> >>>>>>>
> >>>>>>> Sorry, I meant to say host to otg interface.
> >>>>>>>
> >>>>>>>>
> >>>>>>>> I think hcd and gadget are independent each other, now
> >>>>>>>>
> >>>>>>>> Hcd --> otg; and gadget --> otg, (hcd and gadget use otg's symbol)
> >>>>>>>
> >>>>>>> It is actually a circular dependency for both.
> >>>>>>> hcd <--> otg and gadget <--> otg
> >>>>>>>
> >>>>>>> hcd -> otg for usb_otg_register/unregister_hcd otg -> hcd for
> >>>>>>> usb_add/remove_hcd, usb_bus_start_enum, usb_control_msg,
> >>>>>>> usb_hub_find_child
> >>>>>>>
> >>>>>>> gadget -> otg for usb_otg_register/unregister_gadget
> >>>>>>> otg -> gadget for usb_gadget_start/stop, usb_udc_vbus_handler
> >>>>>>>
> >>>>>>> Now consider what will happen if I get rid of the otg_hcd and
> >>>> otg_gadget interfaces.
> >>>>>>> 'y' means built-in, 'm' means module.
> >>>>>>>
> >>>>>>> 1) hcd 'y', gadget 'y'
> >>>>>>> otg has to be 'y' for proper build.
> >>>>>>>
> >>>>>>> 2) hcd 'm', gadget 'm'
> >>>>>>> otg has to be 'm' for proper build.
> >>>>>>>
> >>>>>>> 3) hcd 'y', gadget 'm'
> >>>>>>> Build will fail always.
> >>>>>>> If otg is 'y', otg build will fail due to dependency on gadget.
> >>>>>>> If otg is 'm', hcd build will fail due to dependency on otg.
> >>>>>>>
> >>>>>>> 4) hcd 'm', gadget 'y'
> >>>>>>> Build will fail always.
> >>>>>>> If otg is 'y', otg build will fail due to dependency on hcd.
> >>>>>>> If otg is 'm', gadget build will fails due to dependency on otg.
> >>>>>>>
> >>>>>>> So I solve this problem by adding the otg_hcd_ops and otg_gadget_ops
> >>>>>>> to remove otg->hcd and otg->gadget dependency.
> >>>>>>>
> >>>>>>> Now we can address 3) and 4) like so
> >>>>>>>
> >>>>>>> 3) hcd 'y', gadget 'm'
> >>>>>>> otg has to be 'y' for proper build.
> >>>>>>>
> >>>>>>> 4) hcd 'm', gadget 'y'
> >>>>>>> otg has to be 'y' for proper build.
> >>>>>>>
> >>>>>>
> >>>>>> How about this:
> >>>>>> Moving usb_otg_register/unregister_hcd to host driver to remove
> >>>>>> dependency hcd->otg. And moving usb_otg_get_data to common.c.
> >>>>>>
> >>>>>> Delete the wait queue at usb-otg.c, and if calling usb_otg_get_data
> >>>>>> returns NULL, the host/device driver's probe return -EPROBE_DEFER.
> >>>>>> When the otg driver is probed successfully, the host/device will be
> >>>>>> re-probed again, and usb_otg_register_hcd will be called again.
> >>>>>>
> >>>>>> And let OTG depends on HCD && GADGET, and delete otg_hcd_ops and
> >>>>>> otg_gadget_ops. Below build dependency issues can be fixed.
> >>>>>> What do you think?
> >>>>>>
> >>>>>>> 1) hcd 'y', gadget 'y'
> >>>>>>> otg has to be 'y' for proper build.
> >>>>>>>
> >>>>>>> 2) hcd 'm', gadget 'm'
> >>>>>>> otg has to be 'm' for proper build.
> >>>>>>>
> >>>>>>> 3) hcd 'y', gadget 'm'
> >>>>>>> Build will fail always.
> >>>>>>> If otg is 'y', otg build will fail due to dependency on gadget.
> >>>>>>> If otg is 'm', hcd build will fail due to dependency on otg.
> >>>>>>>
> >>>>>>> 4) hcd 'm', gadget 'y'
> >>>>>>> Build will fail always.
> >>>>>>> If otg is 'y', otg build will fail due to dependency on hcd.
> >>>>>>> If otg is 'm', gadget build will fails due to dependency on otg.
> >>>>>> --
> >>>>>>
> >>>>>
> >>>>> After thinking more, my suggestion can't work. How about moving
> >>>>> CONFIG_USB_OTG out of CONFIG_USB, in that case, CONFIG_USB_OTG can
> >>>>> only be built in.
> >>>>>
> >>>> I tried this but it still doesn't resolve 3 and 4. I.e.
> >>>> it can't be automatically set to 'y' when either of hcd/gadget is 'y'
> >>>> and the other is 'm'.
> >>>
> >>> USB_OTG only can be selected by *user*, can't be automatically set to
> >>> 'y' like you said, no matter what's hcd/gadget config, USB_OTG can be
> >>> disabled in any cases.
> >>
> >> Yes. I am on the same page with that.
> >>>
> >>> I think Peter's intention is to make USB_OTG to be 'bool', either disabled;
> >>> or built-in(if enabled), something like your original idea?
> >>
> >> I'm fine with my original idea if you guys can confirm :).
> >>
> >
> > Please do it.
> >
>
> OK. I managed to fix this and get usbotg to be as module when both USB and GADGET
> are modules with the following patch.
>
> What we do is use USB_OTG_CORE as a hidden tristate symbol that is used to build usbotg.o
> only if USB_OTG is enabled.
>
> USB_OTG is used to enable/disable OTG and it has to be bool since it is used at mutiple
> places in the code.
>

I am ok with that, but better you can write down above at your commit
log, then the reader can know your design purpose.

Peter
> cheers,
> -roger
>
> ---
>
> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> index 8689dcb..ed596ec 100644
> --- a/drivers/usb/Kconfig
> +++ b/drivers/usb/Kconfig
> @@ -32,6 +32,23 @@ if USB_SUPPORT
> config USB_COMMON
> tristate
>
> +config USB_OTG_CORE
> + tristate
> +
> +config USB_OTG
> + bool "OTG/Dual-role support"
> + depends on PM && USB && USB_GADGET
> + default n
> + ---help---
> + The most notable feature of USB OTG is support for a
> + "Dual-Role" device, which can act as either a device
> + or a host. The initial role is decided by the type of
> + plug inserted and can be changed later when two dual
> + role devices talk to each other.
> +
> + Select this only if your board has Mini-AB/Micro-AB
> + connector.
> +
> config USB_ARCH_HAS_HCD
> def_bool y
>
> @@ -40,6 +57,7 @@ config USB
> tristate "Support for Host-side USB"
> depends on USB_ARCH_HAS_HCD
> select USB_COMMON
> + select USB_OTG_CORE
> select NLS # for UTF-8 strings
> ---help---
> Universal Serial Bus (USB) is a specification for a serial bus
> diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
> index 16a5b55..03f7204 100644
> --- a/drivers/usb/Makefile
> +++ b/drivers/usb/Makefile
> @@ -59,6 +59,6 @@ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
> obj-$(CONFIG_USB_GADGET) += gadget/
>
> obj-$(CONFIG_USB_COMMON) += common/
> -obj-$(CONFIG_USB_OTG) += common/
> +obj-$(CONFIG_USB_OTG_CORE) += common/
>
> obj-$(CONFIG_USBIP_CORE) += usbip/
> diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
> index 730d928..5122b3f 100644
> --- a/drivers/usb/common/Makefile
> +++ b/drivers/usb/common/Makefile
> @@ -7,5 +7,7 @@ usb-common-y += common.o
> usb-common-$(CONFIG_USB_LED_TRIG) += led.o
>
> obj-$(CONFIG_USB_ULPI_BUS) += ulpi.o
> +ifeq ($(CONFIG_USB_OTG),y)
> usbotg-y := usb-otg.o usb-otg-fsm.o
> -obj-$(CONFIG_USB_OTG) += usbotg.o
> +obj-$(CONFIG_USB_OTG_CORE) += usbotg.o
> +endif
> diff --git a/drivers/usb/common/usb-otg.c b/drivers/usb/common/usb-otg.c
> index f5eb7f5..98fcfa2 100644
> --- a/drivers/usb/common/usb-otg.c
> +++ b/drivers/usb/common/usb-otg.c
> @@ -16,6 +16,7 @@
>
> #include <linux/kernel.h>
> #include <linux/list.h>
> +#include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_platform.h>
> #include <linux/usb/of.h>
> @@ -841,3 +842,5 @@ int usb_otg_gadget_ready(struct usb_gadget *gadget, bool ready)
> return 0;
> }
> EXPORT_SYMBOL_GPL(usb_otg_gadget_ready);
> +
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
> index de371e6..37f8c54 100644
> --- a/drivers/usb/core/Kconfig
> +++ b/drivers/usb/core/Kconfig
> @@ -41,20 +41,6 @@ config USB_DYNAMIC_MINORS
>
> If you are unsure about this, say N here.
>
> -config USB_OTG
> - bool "OTG/Dual-role support"
> - depends on PM && USB_GADGET
> - default n
> - help
> - The most notable feature of USB OTG is support for a
> - "Dual-Role" device, which can act as either a device
> - or a host. The initial role is decided by the type of
> - plug inserted and can be changed later when two dual
> - role devices talk to each other.
> -
> - Select this only if your board has Mini-AB/Micro-AB
> - connector.
> -
> config USB_OTG_WHITELIST
> bool "Rely on OTG and EH Targeted Peripherals List"
> depends on USB
> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index 2057add..9d55384 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -16,6 +16,7 @@
> menuconfig USB_GADGET
> tristate "USB Gadget Support"
> select USB_COMMON
> + select USB_OTG_CORE
> select NLS
> help
> USB is a master/slave protocol, organized with one master
> --
> 2.7.4
>
>
>

--

Best Regards,
Peter Chen

Next message: Catalin Marinas: "Re: [PATCH v2 4/9] arm64: Add platform selection for BCM2835."
Previous message: Laxman Dewangan: "Re: [PATCH] watchdog: max77620: Add support for watchdog timer"
In reply to: Roger Quadros: "Re: [PATCH v8 13/14] usb: gadget: udc: adapt to OTG core"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]