[PATCH RFT] regulator: qcom_smd: Remove list_voltage callback for rpm_smps_ldo_ops_fixed

From: Axel Lin
Date: Tue Jun 14 2016 - 22:21:44 EST


Use regulator_list_voltage_linear_range in rpm_smps_ldo_ops_fixed is
wrong because it is used for fixed regulator without any linear range.
The rpm_smps_ldo_ops_fixed is used for pm8941_lnldo which has fixed_uV
set and n_voltages = 1. In this case, regulator_list_voltage() can return
rdev->desc->fixed_uV without .list_voltage implementation.

Fixes: 3bfbb4d1a480 ("regulator: qcom_smd: add list_voltage callback")
Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
drivers/regulator/qcom_smd-regulator.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 526bf23..6c7fe477 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -152,7 +152,6 @@ static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
.enable = rpm_reg_enable,
.disable = rpm_reg_disable,
.is_enabled = rpm_reg_is_enabled,
- .list_voltage = regulator_list_voltage_linear_range,

.get_voltage = rpm_reg_get_voltage,
.set_voltage = rpm_reg_set_voltage,
--
2.5.0