[PATCH 2/5] clk: Combine DT binding doc for max77686 and max77802

From: Laxman Dewangan
Date: Wed Jun 15 2016 - 10:29:07 EST


The clock driver for Maxim PMICs max77686 and max77802 are
combined into single file to extend the support for same clock
IP for different PMICs.

Remove the separate DT binding document file for maxim,max77802 and
move all information to maxim,max77686 DT binding document.

Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
CC: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
CC: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
---
.../devicetree/bindings/clock/maxim,max77686.txt | 78 ++++++++++++++++------
.../devicetree/bindings/clock/maxim,max77802.txt | 44 ------------
2 files changed, 58 insertions(+), 64 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt

diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
index 9c40739..354e5ab 100644
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -1,11 +1,15 @@
-Binding for Maxim MAX77686 32k clock generator block
+Binding for Maxim MAX77686/MAX77802 32k clock generator block

-This is a part of device tree bindings of MAX77686 multi-function device.
-More information can be found in bindings/mfd/max77686.txt file.
+This is a part of device tree bindings of MAX77686/MAX77802 multi-function
+device. More information can be found in bindings/mfd/max77686.txt file for
+MAX77686 and bindings/mfd/max77802.txt for MAX77802.

The MAX77686 contains three 32.768khz clock outputs that can be controlled
(gated/ungated) over I2C.

+The MAX77802 contains two 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
Following properties should be presend in main device node of the MFD chip.

Required properties:
@@ -21,26 +25,60 @@ to specify the clock which they consume. Following indices are allowed:
- 1: 32khz_cp clock,
- 2: 32khz_pmic clock.

+For MAX77802, 32khz_pmic is not valid.
+
Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h
-header and can be used in device tree sources.
+header for MAX77686 and dt-bindings/clock/maxim,max77802.h for MAX77802 and can
+be used in device tree sources.
+
+Example:
+
+1. With MAX77686:
+
+#include <dt-bindings/clock/maxim,max77686.h>
+:::
+
+ Node of the MFD chip
+ max77686: max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ /* ... */
+ };
+
+ Clock consumer node
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "my-clock";
+ clocks = <&max77686 MAX77686_CLK_PMIC>;
+ };
+
+2. With MAX77802:

-Example: Node of the MFD chip
+#include <dt-bindings/clock/maxim,max77802.h>
+:::

- max77686: max77686@09 {
- compatible = "maxim,max77686";
- interrupt-parent = <&wakeup_eint>;
- interrupts = <26 0>;
- reg = <0x09>;
- #clock-cells = <1>;
+ Node of the MFD chip
+ max77802: max77802@09 {
+ compatible = "maxim,max77802";
+ interrupt-parent = <&wakeup_eint>;
+ interrupts = <26 0>;
+ reg = <0x09>;
+ #clock-cells = <1>;

- /* ... */
- };
+ /* ... */
+ };

-Example: Clock consumer node
+ Clock consumer node

- foo@0 {
- compatible = "bar,foo";
- /* ... */
- clock-names = "my-clock";
- clocks = <&max77686 MAX77686_CLK_PMIC>;
- };
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "my-clock";
+ clocks = <&max77802 MAX77802_CLK_32K_AP>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt
deleted file mode 100644
index c6dc783..0000000
--- a/Documentation/devicetree/bindings/clock/maxim,max77802.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Binding for Maxim MAX77802 32k clock generator block
-
-This is a part of device tree bindings of MAX77802 multi-function device.
-More information can be found in bindings/mfd/max77802.txt file.
-
-The MAX77802 contains two 32.768khz clock outputs that can be controlled
-(gated/ungated) over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Required properties:
-- #clock-cells: From common clock binding; shall be set to 1.
-
-Optional properties:
-- clock-output-names: From common clock binding.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Following indices are allowed:
- - 0: 32khz_ap clock,
- - 1: 32khz_cp clock.
-
-Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77802.h
-header and can be used in device tree sources.
-
-Example: Node of the MFD chip
-
- max77802: max77802@09 {
- compatible = "maxim,max77802";
- interrupt-parent = <&wakeup_eint>;
- interrupts = <26 0>;
- reg = <0x09>;
- #clock-cells = <1>;
-
- /* ... */
- };
-
-Example: Clock consumer node
-
- foo@0 {
- compatible = "bar,foo";
- /* ... */
- clock-names = "my-clock";
- clocks = <&max77802 MAX77802_CLK_32K_AP>;
- };
--
2.1.4