Re: [PATCH V2 1/4] clk: max77686: Combine Maxim max77686 and max77802 driver

From: Krzysztof Kozlowski
Date: Fri Jun 17 2016 - 02:02:08 EST


On 06/16/2016 03:23 PM, Laxman Dewangan wrote:
> The clock IP used on the Maxim PMICs max77686 and max77802 are
> same. The configuration of clock register is also same except
> the number of clocks.
>
> Part of common code utilisation, there is 3 files for these chips
> clock driver, one for common and two files for driver registration.
>
> Combine both drivers into single file and move common code into
> same common file reduces the 2 files and make max77686 and max77802
> clock driver in single fine. This driver does not depends on the
> parent driver structure. The regmap handle is acquired through
> regmap APIs for the register access.
>
> This combination of driver helps on adding clock driver for different
> Maxim PMICs which has similar clock IP like MAX77620 and MAX20024.
>
> Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
> CC: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> CC: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
> Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> Tested-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> Tested-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
>
> ---
> Changes from V1:
> - Collected RB and TB from Javier.
> - Change the max_gen to max77686.
> - Rename structure and avoid duplication for reg and mask.
> - Taken care of comment from Krzysztof on coding.
> ---
> drivers/clk/Kconfig | 15 +--
> drivers/clk/Makefile | 2 -
> drivers/clk/clk-max-gen.c | 194 -----------------------------------
> drivers/clk/clk-max-gen.h | 32 ------
> drivers/clk/clk-max77686.c | 244 ++++++++++++++++++++++++++++++++++++++++++---
> drivers/clk/clk-max77802.c | 96 ------------------
> 6 files changed, 234 insertions(+), 349 deletions(-)
> delete mode 100644 drivers/clk/clk-max-gen.c
> delete mode 100644 drivers/clk/clk-max-gen.h
> delete mode 100644 drivers/clk/clk-max77802.c


Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>

Best regards,
Krzysztof