[PATCH RFC 2/2] rtc/rtc-cmos: Initialize software counters before irq is registered

From: Pratyush Anand
Date: Tue Jun 21 2016 - 00:57:08 EST


We have observed on few machines with rtc-cmos device that
hpet_rtc_interrupt() is called before cmos_do_probe() could call
hpet_rtc_timer_init(). It has not been observed during normal boot/reboot
of machines. It *sometime* happens when system is booted with kdump
secondary kernel. So, neither hpet_default_delta nor hpet_t1_cmp is
initialized by the time interrupt is raised in the given situation.
Therefore while loop of hpet_cnt_ahead() in hpet_rtc_timer_reinit() never
completes. This leads to "NMI watchdog: Watchdog detected hard LOCKUP on
cpu 0".

I am still clueless, how can an interrupt be raised before RTC is enabled.
But I do not have any idea about this device, so I am putting this patch as
RFC to get feedback from hpet/rtc-cmos developer.

I am initializing software counters in this patch so that LOCKUP could be
avoided. Even if it resolves the issue, I understand that proposed patch
may not be the best way to solve this issue.

Signed-off-by: Pratyush Anand <panand@xxxxxxxxxx>
---
drivers/rtc/rtc-cmos.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index fbe9c72438e1..101dc948295f 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -129,6 +129,16 @@ static inline int hpet_rtc_dropped_irq(void)
return 0;
}

+static inline int hpet_rtc_timer_counter_init(void)
+{
+ return 0;
+}
+
+static inline int hpet_rtc_timer_enable(void)
+{
+ return 0;
+}
+
static inline int hpet_rtc_timer_init(void)
{
return 0;
@@ -710,6 +720,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
goto cleanup1;
}

+ hpet_rtc_timer_counter_init();
if (is_valid_irq(rtc_irq)) {
irq_handler_t rtc_cmos_int_handler;

@@ -732,7 +743,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
goto cleanup1;
}
}
- hpet_rtc_timer_init();
+ hpet_rtc_timer_enable();

/* export at least the first block of NVRAM */
nvram.size = address_space - NVRAM_OFFSET;
--
2.5.5