Re: [PATCH v3 2/6] Documentation: dt: mtd: gpmi: document the clocks and clock-names in DT property

From: Han Xu
Date: Tue Jun 28 2016 - 17:18:32 EST


On Tue, Jun 28, 2016 at 3:55 PM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Fri, Jun 24, 2016 at 04:40:07PM -0500, Han Xu wrote:
>> add the clocks and clock-names in DT property, gpmi-io clock is
>> mandatory for all platforms, but some platforms, such as i.MX6Q may
>> need more extra clocks for submodules. More details please refer to the
>> SoC reference manual.
>>
>> Signed-off-by: Han Xu <han.xu@xxxxxxx>
>> ---
>> Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 9 +++++++++
>> 1 file changed, 9 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
>> index d02acaf..a2fd034 100644
>> --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
>> +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
>> @@ -13,6 +13,13 @@ Required properties:
>> and GPMI DMA channel ID.
>> Refer to dma.txt and fsl-mxs-dma.txt for details.
>> - dma-names: Must be "rx-tx".
>> + - clocks : The clocks needed by the gpmi controller. This field varies
>> + depends on the SoC design, "gpmi-io" is mandatory but some platforms may
>> + need several extra clocks, such as i.MX6 series, which requires "gpmi_apb,
>> + gpmi_bch, gpmi_bch_apb and per1_bch" for all submodules, while i.MX7 only
>> + need gpmi_bch_apb. Please refer to the HW design manual.
>> + - clock-names : the name of the clocks, please refer to the HW design
>> + manual.
>
> No please list the names here (I assume what is above?). Also need to
> specify the order of the clocks. It would be clearest if you list things
> by exact compatible strings.

These are the exact clocks needed by i.MX6 and i.MX7. Order doesn't matter.

>
> Rob
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/



--
Sincerely,

Han XU