Re: [PATCH 2/4] dt-bindings: Document the STM32 reset bindings

[Rob Herring]

On Mon, Jul 04, 2016 at 03:47:30PM +0200, gabriel.fernandez@xxxxxx wrote:
> From: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
> 
> This adds documentation of device tree bindings for the
> STM32 reset controller.
> 
> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
> ---
>  .../devicetree/bindings/reset/st,stm32-rcc.txt     | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> new file mode 100644
> index 0000000..333080c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> @@ -0,0 +1,50 @@
> +STMicroelectronics STM32 Peripheral Reset Controller
> +====================================================
> +
> +The RCC IP is both a reset and a clock controller. This documentation only
> +documents the reset part.

The clock part is already documented or will do later? Either way, you 
are describing an IP block, so please describe all of it now and in one 
place.

Rob