[PATCH v2 6/6] dmaengine: pl330: Make sure microcode is privileged-executable

[Mitchel Humpherys]

The PL330 can perform privileged instruction fetches.  This can result
in SMMU permission faults on SMMUs that implement the ARMv8 VMSA, which
specifies that mappings that are writeable at one execution level shall
not be executable at any higher-privileged level.  Fix this by using the
DMA_ATTR_PRIVILEGED_EXECUTABLE attribute, which will ensure that the
microcode IOMMU mapping is not writeable.

Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
Cc: Jassi Brar <jassi.brar@xxxxxxxxxxx>
Signed-off-by: Mitchel Humpherys <mitchelh@xxxxxxxxxxxxxx>
---
 drivers/dma/pl330.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 372b4359da97..25bc49d47c45 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1854,14 +1854,17 @@ static int dmac_alloc_resources(struct pl330_dmac *pl330)
 {
 	int chans = pl330->pcfg.num_chan;
 	int ret;
+	DEFINE_DMA_ATTRS(attrs);
 
+	dma_set_attr(DMA_ATTR_PRIVILEGED_EXECUTABLE, &attrs);
 	/*
 	 * Alloc MicroCode buffer for 'chans' Channel threads.
 	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
 	 */
-	pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
+	pl330->mcode_cpu = dma_alloc_attrs(pl330->ddma.dev,
 				chans * pl330->mcbufsz,
-				&pl330->mcode_bus, GFP_KERNEL);
+				&pl330->mcode_bus, GFP_KERNEL,
+				&attrs);
 	if (!pl330->mcode_cpu) {
 		dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
 			__func__, __LINE__);
-- 
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project