Re: [e1000_netpoll] BUG: sleeping function called from invalid context at kernel/irq/manage.c:110
From: Fengguang Wu
Date: Tue Jul 26 2016 - 11:32:58 EST
Hi Eric,
It works!
On Tue, Jul 26, 2016 at 11:14:52AM +0200, Eric Dumazet wrote:
On Tue, 2016-07-26 at 11:50 +0800, Fengguang Wu wrote:
Greetings,
This BUG message can be found in recent kernels as well as v4.4 and
linux-stable. It happens when running
modprobe netconsole netconsole=@/,$port@$server/
[ 39.937534] 22 Jul 13:30:40 ntpdate[440]: step time server 192.168.1.1 offset -673.833841 sec
[ 39.943285] netpoll: netconsole: local port 6665
[ 39.943436] netpoll: netconsole: local IPv4 address 0.0.0.0
[ 39.943609] netpoll: netconsole: interface 'eth0'
[ 39.943756] netpoll: netconsole: remote port 6672
[ 39.943913] netpoll: netconsole: remote IPv4 address 192.168.1.1
[ 39.944099] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 39.944311] netpoll: netconsole: local IP 192.168.1.193
[ 39.944514] BUG: sleeping function called from invalid context at kernel/irq/manage.c:110
[ 39.944515] in_atomic(): 1, irqs_disabled(): 1, pid: 448, name: modprobe
[ 39.944517] CPU: 6 PID: 448 Comm: modprobe Not tainted 4.7.0-rc7-wt-ath-10122-gf9b5ec2 #102
[ 39.944518] Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0097.2012.1228.1346 12/28/2012
[ 39.944522] 0000000000000000 ffffc90001f2f9e8 ffffffff813417d9 ffff88007faba5c0
[ 39.944524] 000000000000006e ffffc90001f2fa00 ffffffff810aec03 ffffffff81a25948
[ 39.944525] ffffc90001f2fa28 ffffffff810aec9a ffff8803e5bd9400 ffff8803e50fbd68
[ 39.944526] Call Trace:
[ 39.944533] [<ffffffff813417d9>] dump_stack+0x63/0x8a
[ 39.944536] [<ffffffff810aec03>] ___might_sleep+0xd3/0x120
[ 39.944537] [<ffffffff810aec9a>] __might_sleep+0x4a/0x80
[ 39.944541] [<ffffffff810e4638>] synchronize_irq+0x38/0xa0
[ 39.944543] [<ffffffff810e3c8e>] ? __irq_put_desc_unlock+0x1e/0x40
[ 39.944545] [<ffffffff810e48e3>] ? __disable_irq_nosync+0x43/0x60
[ 39.944547] [<ffffffff810e492c>] disable_irq+0x1c/0x20
[ 39.944559] [<ffffffffa0220932>] e1000_netpoll+0xf2/0x120 [e1000e]
[ 39.944563] [<ffffffff815f2bdc>] netpoll_poll_dev+0x5c/0x1a0
[ 39.944567] [<ffffffff815bb361>] ? __kmalloc_reserve+0x31/0x90
[ 39.944569] [<ffffffff815f2e8b>] netpoll_send_skb_on_dev+0x16b/0x250
[ 39.944572] [<ffffffff815f325c>] netpoll_send_udp+0x2ec/0x450
[ 39.944576] [<ffffffffa003cb62>] write_msg+0xb2/0xf0 [netconsole]
[ 39.944578] [<ffffffff810e04e5>] call_console_drivers+0x115/0x120
[ 39.944580] [<ffffffff810e1f13>] console_unlock+0x333/0x5c0
[ 39.944583] [<ffffffff810e2c74>] register_console+0x1c4/0x380
[ 39.944586] [<ffffffffa004f1c5>] init_netconsole+0x1c5/0x1000 [netconsole]
[ 39.944588] [<ffffffffa004f000>] ? 0xffffffffa004f000
[ 39.944591] [<ffffffff8100216d>] do_one_initcall+0x3d/0x150
[ 39.944592] [<ffffffff810aec9a>] ? __might_sleep+0x4a/0x80
[ 39.944596] [<ffffffff811f5098>] ? kmem_cache_alloc_trace+0x188/0x1e0
[ 39.944598] [<ffffffff8118f871>] do_init_module+0x5f/0x1d8
[ 39.944602] [<ffffffff81114009>] load_module+0x1429/0x1b40
[ 39.944604] [<ffffffff81110cd0>] ? __symbol_put+0x40/0x40
[ 39.944607] [<ffffffff8121f348>] ? kernel_read_file+0x178/0x1a0
[ 39.944608] [<ffffffff8121f429>] ? kernel_read_file_from_fd+0x49/0x80
[ 39.944611] [<ffffffff81114973>] SYSC_finit_module+0xc3/0xf0
[ 39.944614] [<ffffffff811149be>] SyS_finit_module+0xe/0x10
[ 39.944617] [<ffffffff816e5877>] entry_SYSCALL_64_fastpath+0x1a/0xa9
[ 39.946384] console [netcon0] enabled
[ 39.946514] netconsole: network logging started
Can this be possibly fixed?
Could you try this ?
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index f42129d09e2c23ba9fdb5cde890d50ecb7166a42..a53c41c4c4f7d1fe52f95a2cab8784a938b3820b 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -5257,9 +5257,13 @@ static void e1000_netpoll(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- disable_irq(adapter->pdev->irq);
- e1000_intr(adapter->pdev->irq, netdev);
- enable_irq(adapter->pdev->irq);
+ if (napi_schedule_prep(&adapter->napi)) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ }
The machines are actually running e1000e driver, so I copied your
approach to e1000e and it works:
kern :info : [ 16.109647] netpoll: netconsole: local port 6665
kern :info : [ 16.109961] netpoll: netconsole: local IPv4 address 0.0.0.0
kern :info : [ 16.110346] netpoll: netconsole: interface 'eth0'
kern :info : [ 16.110672] netpoll: netconsole: remote port 6676
kern :info : [ 16.110991] netpoll: netconsole: remote IPv4 address 192.168.2.1
kern :info : [ 16.111398] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
kern :info : [ 16.111845] netpoll: netconsole: local IP 192.168.2.3
kern :info : [ 16.114284] console [netcon0] enabled
kern :info : [ 16.114550] netconsole: network logging started
However I'm not sure if it'll have side effects, because this
effectively disables the various checks in e1000_intr() and
e1000_intr_msi().
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 9b4ec13..4f89873 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6711,15 +6711,14 @@ static void e1000_netpoll(struct net_device *netdev)
case E1000E_INT_MODE_MSIX:
e1000_intr_msix(adapter->pdev->irq, netdev);
break;
- case E1000E_INT_MODE_MSI:
- disable_irq(adapter->pdev->irq);
- e1000_intr_msi(adapter->pdev->irq, netdev);
- enable_irq(adapter->pdev->irq);
- break;
default: /* E1000E_INT_MODE_LEGACY */
- disable_irq(adapter->pdev->irq);
- e1000_intr(adapter->pdev->irq, netdev);
- enable_irq(adapter->pdev->irq);
+ if (napi_schedule_prep(&adapter->napi)) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ }
break;
}
}
Thanks,
Fengguang