Re: [PATCH] regulator: axp20x: support AXP813 variant

From: Maxime Ripard
Date: Thu Jul 28 2016 - 16:20:02 EST

Next message: Maxime Ripard: "Re: [linux-sunxi] [PATCH] regulator: axp20x: support AXP813 variant"
Previous message: Keith Busch: "Re: [PATCH -next] PCI/PCIe: make DPC explicitly non-modular"
Next in thread: Jean-Francois Moine: "Re: [PATCH] regulator: axp20x: support AXP813 variant"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

This patch must be sent to the MFD, regulators and DT maintainers, and
the relevant mailing lists.

On Thu, Jul 28, 2016 at 09:28:14AM +0200, Jean-Francois Moine wrote:
> The X-Powers AXP813 PMIC is close enough to the AXP809 with some
> more outputs.
>
> Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx>
> ---
> Documentation/devicetree/bindings/mfd/axp20x.txt | 32 ++++++++-
> drivers/mfd/axp20x-rsb.c | 1 +
> drivers/mfd/axp20x.c | 3 +
> drivers/regulator/axp20x-regulator.c | 82 +++++++++++++++++++++++-
> include/linux/mfd/axp20x.h | 38 +++++++++++
> 5 files changed, 153 insertions(+), 3 deletions(-)

And this needs to be split per logical changes.

> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
> index 585a955..2a8ec61 100644
> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -7,10 +7,12 @@ axp209 (X-Powers)
> axp221 (X-Powers)
> axp223 (X-Powers)
> axp809 (X-Powers)
> +axp813 (X-Powers)
>
> Required properties:
> - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
> - "x-powers,axp221", "x-powers,axp223", "x-powers,axp809"
> + "x-powers,axp221", "x-powers,axp223", "x-powers,axp809",
> + "x-powers,axp813"
> - reg: The I2C slave address or RSB hardware address for the AXP chip
> - interrupt-parent: The parent interrupt controller
> - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
> @@ -110,6 +112,34 @@ LDO_IO1 : LDO : ips-supply : GPIO 1
> RTC_LDO : LDO : ips-supply : always on
> SW : On/Off Switch : swin-supply
>
> +AXP813 regulators, type, and corresponding input supply names:
> +
> +Regulator Type Supply Name Notes
> +--------- ---- ----------- -----
> +DCDC1 : DC-DC buck : vin1-supply
> +DCDC2 : DC-DC buck : vin2-supply
> +DCDC3 : DC-DC buck : vin3-supply
> +DCDC4 : DC-DC buck : vin4-supply
> +DCDC5 : DC-DC buck : vin5-supply
> +DCDC6 : DC-DC buck : vin6-supply
> +DCDC7 : DC-DC buck : vin7-supply
> +RTC_LDO : LDO : ips-supply : always on
> +ALDO1 : LDO : aldoin-supply : shared supply
> +ALDO2 : LDO : aldoin-supply : shared supply
> +ALDO3 : LDO : aldoin-supply : shared supply
> +DLDO1 : LDO : dldoin-supply : shared supply
> +DLDO2 : LDO : dldoin-supply : shared supply
> +DLDO3 : LDO : dldoin-supply : shared supply
> +DLDO4 : LDO : dldoin-supply : shared supply
> +ELDO1 : LDO : eldoin-supply : shared supply
> +ELDO2 : LDO : eldoin-supply : shared supply
> +ELDO3 : LDO : eldoin-supply : shared supply
> +FLDO1 : LDO : fldoin-supply : shared supply
> +FLDO2 : LDO : fldoin-supply : shared supply
> +LDO_IO0 : LDO : ips-supply : GPIO 0
> +LDO_IO1 : LDO : ips-supply : GPIO 1
> +DC1SW : On/Off Switch : : DCDC1 secondary output
> +
> Example:
>
> axp209: pmic@34 {
> diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
> index a407527..e34643b 100644
> --- a/drivers/mfd/axp20x-rsb.c
> +++ b/drivers/mfd/axp20x-rsb.c
> @@ -62,6 +62,7 @@ static int axp20x_rsb_remove(struct sunxi_rsb_device *rdev)
> static const struct of_device_id axp20x_rsb_of_match[] = {
> { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
> { .compatible = "x-powers,axp809", .data = (void *)AXP809_ID },
> + { .compatible = "x-powers,axp813", .data = (void *)AXP813_ID },
> { },
> };
> MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index fd80b09..e62d56f 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -39,6 +39,7 @@ static const char * const axp20x_model_names[] = {
> "AXP223",
> "AXP288",
> "AXP809",
> + "AXP813",
> };
>
> static const struct regmap_range axp152_writeable_ranges[] = {
> @@ -494,6 +495,7 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
>
> };
>
> +/* common 803/809/813 */
> static const struct regmap_irq_chip axp809_regmap_irq_chip = {
> .name = "axp809",
> .status_base = AXP20X_IRQ1_STATE,
> @@ -733,6 +735,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
> axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
> break;
> case AXP809_ID:
> + case AXP813_ID:
> axp20x->nr_cells = ARRAY_SIZE(axp809_cells);
> axp20x->cells = axp809_cells;
> axp20x->regmap_cfg = &axp22x_regmap_config;
> diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
> index 6d9ac76..c3287c9 100644
> --- a/drivers/regulator/axp20x-regulator.c
> +++ b/drivers/regulator/axp20x-regulator.c
> @@ -299,6 +299,78 @@ static const struct regulator_desc axp809_regulators[] = {
> AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
> };
>
> +static const struct regulator_linear_range axp813_dcdc2_4_ranges[] = {
> + REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
> + REGULATOR_LINEAR_RANGE(1220000, 71, 75, 20000),
> +};
> +
> +static const struct regulator_linear_range axp813_dcdc5_ranges[] = {
> + REGULATOR_LINEAR_RANGE(800000, 0, 32, 10000),
> + REGULATOR_LINEAR_RANGE(1140000, 33, 68, 20000),
> +};
> +
> +static const struct regulator_linear_range axp813_dcdc6_7_ranges[] = {
> + REGULATOR_LINEAR_RANGE(600000, 0, 50, 10000),
> + REGULATOR_LINEAR_RANGE(1120000, 51, 71, 20000),
> +};
> +
> +static const struct regulator_desc axp813_regulators[] = {
> + AXP_DESC(AXP813, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
> + AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
> + AXP_DESC(AXP813, DLDO2, "dldo2", "dldoin", 700, 4200, 100,
> + AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
> + AXP_DESC(AXP813, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
> + AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
> + AXP_DESC(AXP813, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
> + AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
> + AXP_DESC(AXP813, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
> + AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
> + AXP_DESC(AXP813, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
> + AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
> + AXP_DESC(AXP813, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
> + AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
> + AXP_DESC(AXP813, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
> + AXP813_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
> + AXP_DESC(AXP813, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
> + AXP813_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
> + AXP_DESC(AXP813, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
> + AXP813_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
> + AXP_DESC_RANGES(AXP813, DCDC2, "dcdc2", "vin2", axp813_dcdc2_4_ranges,
> + 76, AXP813_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(1)),
> + AXP_DESC_RANGES(AXP813, DCDC3, "dcdc3", "vin3", axp813_dcdc2_4_ranges,
> + 76, AXP813_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(2)),
> + AXP_DESC_RANGES(AXP813, DCDC4, "dcdc4", "vin4", axp813_dcdc2_4_ranges,
> + 76, AXP813_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(3)),
> + AXP_DESC_RANGES(AXP813, DCDC5, "dcdc5", "vin5", axp813_dcdc5_ranges,
> + 69, AXP813_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(4)),
> + AXP_DESC_RANGES(AXP813, DCDC6, "dcdc6", "vin6", axp813_dcdc6_7_ranges,
> + 72, AXP813_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(5)),
> + AXP_DESC_RANGES(AXP813, DCDC7, "dcdc7", "vin7", axp813_dcdc6_7_ranges,
> + 72, AXP813_DCDC7_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
> + BIT(6)),
> + AXP_DESC_FIXED(AXP813, RTC_LDO, "rtc_ldo", "ips", 3000),
> + AXP_DESC(AXP813, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
> + AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
> + AXP_DESC(AXP813, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
> + AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
> + AXP_DESC(AXP813, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
> + AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
> + AXP_DESC_IO(AXP813, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
> + AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
> + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
> + AXP_DESC_IO(AXP813, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
> + AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
> + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
> + /* secondary switchable output of DCDC1 */
> + AXP_DESC_SW(AXP813, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
> + BIT(7)),
> +};
> +
> static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
> {
> struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> @@ -444,6 +516,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> regulators = axp809_regulators;
> nregulators = AXP809_REG_ID_MAX;
> break;
> + case AXP813_ID:
> + regulators = axp813_regulators;
> + nregulators = AXP813_REG_ID_MAX;
> + break;
> default:
> dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
> axp20x->variant);
> @@ -467,7 +543,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> * name.
> */
> if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
> - (regulators == axp809_regulators && i == AXP809_DC1SW)) {
> + (regulators == axp809_regulators && i == AXP809_DC1SW) ||
> + (regulators == axp813_regulators && i == AXP813_DC1SW)) {
> new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
> GFP_KERNEL);
> *new_desc = regulators[i];
> @@ -505,7 +582,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
> * Save AXP22X DCDC1 / DCDC5 regulator names for later.
> */
> if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) ||
> - (regulators == axp809_regulators && i == AXP809_DCDC1))
> + (regulators == axp809_regulators && i == AXP809_DCDC1) ||
> + (regulators == axp813_regulators && i == AXP813_DCDC1))
> of_property_read_string(rdev->dev.of_node,
> "regulator-name",
> &dcdc1_name);
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 0be4982..637fb7c 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -21,6 +21,7 @@ enum {
> AXP223_ID,
> AXP288_ID,
> AXP809_ID,
> + AXP813_ID,
> NR_AXP20X_VARIANTS,
> };
>
> @@ -91,6 +92,16 @@ enum {
> #define AXP22X_ALDO3_V_OUT 0x2a
> #define AXP22X_CHRG_CTRL3 0x35
>
> +#define AXP813_FLDO1_V_OUT 0x1c
> +#define AXP813_FLDO2_V_OUT 0x1d
> +#define AXP813_DCDC1_V_OUT 0x20
> +#define AXP813_DCDC2_V_OUT 0x21
> +#define AXP813_DCDC3_V_OUT 0x22
> +#define AXP813_DCDC4_V_OUT 0x23
> +#define AXP813_DCDC5_V_OUT 0x24
> +#define AXP813_DCDC6_V_OUT 0x25
> +#define AXP813_DCDC7_V_OUT 0x26
> +
> /* Interrupt */
> #define AXP152_IRQ1_EN 0x40
> #define AXP152_IRQ2_EN 0x41
> @@ -288,6 +299,33 @@ enum {
> AXP809_REG_ID_MAX,
> };
>
> +enum {
> + AXP813_DCDC1 = 0,
> + AXP813_DCDC2,
> + AXP813_DCDC3,
> + AXP813_DCDC4,
> + AXP813_DCDC5,
> + AXP813_DCDC6,
> + AXP813_DCDC7,
> + AXP813_RTC_LDO,
> + AXP813_ALDO1,
> + AXP813_ALDO2,
> + AXP813_ALDO3,
> + AXP813_DLDO1,
> + AXP813_DLDO2,
> + AXP813_DLDO3,
> + AXP813_DLDO4,
> + AXP813_ELDO1,
> + AXP813_ELDO2,
> + AXP813_ELDO3,
> + AXP813_FLDO1,
> + AXP813_FLDO2,
> + AXP813_LDO_IO0,
> + AXP813_LDO_IO1,
> + AXP813_DC1SW,
> + AXP813_REG_ID_MAX,
> +};
> +
> /* IRQs */
> enum {
> AXP152_IRQ_LDO0IN_CONNECT = 1,

Looks fine otherwise.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature

Next message: Maxime Ripard: "Re: [linux-sunxi] [PATCH] regulator: axp20x: support AXP813 variant"
Previous message: Keith Busch: "Re: [PATCH -next] PCI/PCIe: make DPC explicitly non-modular"
Next in thread: Jean-Francois Moine: "Re: [PATCH] regulator: axp20x: support AXP813 variant"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]