[PATCH 5/8] hisi_sas: add v2 hw slot complete internal abort support

From: John Garry
Date: Wed Aug 10 2016 - 16:50:22 EST


Add code in slot_complete_v2_hw() to deal with the
slots which have completed due to internal abort.

The status codes have the following meaning:
- STAT_IO_ABORTED: the IO has been aborted due to
internal abort, whether by device or individual
abort command
- STAT_IO_COMPLETE: internal abort command has
completed successfully for device or individual
abort command
- STAT_IO_NO_DEVICE: internal abort command has
completed for device but cannot find any IO
- STAT_IO_NOT_VALID: internal abort command has
completed for single command but could not
find the command

Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index fec1675..bf9b693 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -227,6 +227,13 @@
#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
#define CMPLT_HDR_ERX_OFF 12
#define CMPLT_HDR_ERX_MSK (0x1 << CMPLT_HDR_ERX_OFF)
+#define CMPLT_HDR_ABORT_STAT_OFF 13
+#define CMPLT_HDR_ABORT_STAT_MSK (0x7 << CMPLT_HDR_ABORT_STAT_OFF)
+/* abort_stat */
+#define STAT_IO_NOT_VALID 0x1
+#define STAT_IO_NO_DEVICE 0x2
+#define STAT_IO_COMPLETE 0x3
+#define STAT_IO_ABORTED 0x4
/* dw1 */
#define CMPLT_HDR_IPTT_OFF 0
#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF)
@@ -1569,6 +1576,30 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot,
goto out;
}

+ /* Use SAS+TMF status codes */
+ switch ((complete_hdr->dw0 & CMPLT_HDR_ABORT_STAT_MSK)
+ >> CMPLT_HDR_ABORT_STAT_OFF) {
+ case STAT_IO_ABORTED:
+ /* this io has been aborted by abort command */
+ ts->stat = SAS_ABORTED_TASK;
+ goto out;
+ case STAT_IO_COMPLETE:
+ /* internal abort command complete */
+ ts->stat = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ case STAT_IO_NO_DEVICE:
+ ts->stat = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ case STAT_IO_NOT_VALID:
+ /* abort single io, controller don't find
+ * the io need to abort
+ */
+ ts->stat = TMF_RESP_FUNC_FAILED;
+ goto out;
+ default:
+ break;
+ }
+
if ((complete_hdr->dw0 & CMPLT_HDR_ERX_MSK) &&
(!(complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))) {

--
1.9.1