Re: [PATCH v4] hwmon: (max6650.c) Add devicetree support

From: Guenter Roeck
Date: Thu Aug 18 2016 - 22:45:27 EST


On 08/16/2016 12:20 AM, Mike Looijmans wrote:
Parse devicetree parameters for voltage and prescaler setting. This allows
using multiple max6550 devices with varying settings, and also makes it
possible to instantiate and configure the device using devicetree.

Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
v4: Vendor prefix "maxim," for devicetree properties and compatible string
Split documentation into separate patch
v3: Resubmit because wrong mailing lists used
Fix style errors as reported by checkpatch.pl
Fix bug in DT parsing of fan-prescale
v2: Add devicetree binding documentation
Code changes as suggested by Guenter
Reduce log info, output only a single line
drivers/hwmon/max6650.c | 47 ++++++++++++++++++++++++++++++++++++-----------
1 file changed, 36 insertions(+), 11 deletions(-)

diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 162a520..6beb62c 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -39,6 +39,7 @@
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
+#include <linux/of_device.h>

/*
* Insmod parameters
@@ -48,7 +49,7 @@
static int fan_voltage;
/* prescaler: Possible values are 1, 2, 4, 8, 16 or 0 for don't change */
static int prescaler;
-/* clock: The clock frequency of the chip the driver should assume */
+/* clock: The clock frequency of the chip (max6651 can be clocked externally) */
static int clock = 254000;

module_param(fan_voltage, int, S_IRUGO);
@@ -133,6 +134,19 @@ static const u8 tach_reg[] = {
MAX6650_REG_TACH3,
};

+static const struct of_device_id max6650_dt_match[] = {
+ {
+ .compatible = "maxim,max6650",
+ .data = (void *)1
+ },
+ {
+ .compatible = "maxim,max6651",
+ .data = (void *)4
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, max6650_dt_match);
+
static struct max6650_data *max6650_update_device(struct device *dev)
{
struct max6650_data *data = dev_get_drvdata(dev);
@@ -566,6 +580,17 @@ static int max6650_init_client(struct max6650_data *data,
struct device *dev = &client->dev;
int config;
int err = -EIO;
+ u32 voltage;
+ u32 prescale;
+
+ if (of_property_read_u32(dev->of_node, "maxim,fan-microvolt",
+ &voltage))
+ voltage = fan_voltage;
+ else
+ voltage = voltage > 5500000 ? 12 : 5;

I think this should only accept 5V or 12V.

Guenter

+ if (of_property_read_u32(dev->of_node, "maxim,fan-prescale",
+ &prescale))
+ prescale = prescaler;

config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG);

@@ -574,7 +599,7 @@ static int max6650_init_client(struct max6650_data *data,
return err;
}

- switch (fan_voltage) {
+ switch (voltage) {
case 0:
break;
case 5:
@@ -584,14 +609,10 @@ static int max6650_init_client(struct max6650_data *data,
config |= MAX6650_CFG_V12;
break;
default:
- dev_err(dev, "illegal value for fan_voltage (%d)\n",
- fan_voltage);
+ dev_err(dev, "illegal value for fan_voltage (%d)\n", voltage);
}

- dev_info(dev, "Fan voltage is set to %dV.\n",
- (config & MAX6650_CFG_V12) ? 12 : 5);
-
- switch (prescaler) {
+ switch (prescale) {
case 0:
break;
case 1:
@@ -614,10 +635,11 @@ static int max6650_init_client(struct max6650_data *data,
| MAX6650_CFG_PRESCALER_16;
break;
default:
- dev_err(dev, "illegal value for prescaler (%d)\n", prescaler);
+ dev_err(dev, "illegal value for prescaler (%d)\n", prescale);
}

- dev_info(dev, "Prescaler is set to %d.\n",
+ dev_info(dev, "Fan voltage: %dV, prescaler: %d.\n",
+ (config & MAX6650_CFG_V12) ? 12 : 5,
1 << (config & MAX6650_CFG_PRESCALER_MASK));

/*
@@ -651,6 +673,8 @@ static int max6650_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
+ const struct of_device_id *of_id =
+ of_match_device(of_match_ptr(max6650_dt_match), dev);
struct max6650_data *data;
struct device *hwmon_dev;
int err;
@@ -661,7 +685,7 @@ static int max6650_probe(struct i2c_client *client,

data->client = client;
mutex_init(&data->update_lock);
- data->nr_fans = id->driver_data;
+ data->nr_fans = of_id ? (int)(uintptr_t)of_id->data : id->driver_data;

/*
* Initialize the max6650 chip
@@ -691,6 +715,7 @@ MODULE_DEVICE_TABLE(i2c, max6650_id);
static struct i2c_driver max6650_driver = {
.driver = {
.name = "max6650",
+ .of_match_table = of_match_ptr(max6650_dt_match),
},
.probe = max6650_probe,
.id_table = max6650_id,