Re: linux kernel 3.19.X does not load when compiled with binutils 2.6, works fine when compiled with binutils 2.22

[Lennart Sorensen]

On Wed, Aug 24, 2016 at 04:42:20PM +0200, luigi.genoni@xxxxxxxxxxxxxxxxxxx wrote:
> Hi all,
> 
> recentrly I was in need to compile and run linux kernel 3.19.8 on some
> servers, with different bios and cpus.
> 
> so i noticed that If i compile this kernel with binutils 2.6 (and 2.7) it
> does not load the image, both lilo, grub/grub2 show the message:

Did you by any chance mean 2.26 and 2.27 or are you really trying to
use binutils from 1996?

> loading kernel
> 
> loading ramdisk and nothing happens.
> 
> i tried the debug option, at boot, but it simply does not load the kernel.
> 
> 
> if i compile this kernel with:
> 
> binutils 2.22
> 
> everything works fine,
> 
> I tried this on a xeon with startdard bios, a xeon with efi, an amd
> Athlon-mp with bios and an AMD A8 with EFI.
> 
> I tried gcc 4.3 and gcc 4.8, with both the kernel loads if compiled with
> binutils 2.22, and doesn't load with binutils 2.6.
> 
> 
> What really bugs me is that on all the 4 servers i user i could compile and
> run without problems linux 4.7 compiled with binutils 2.6 and 2.7 with gcc
> 4.8 5.9 and 6.1

You must mean 2.26 and 2.27.

> i cannot afford to downgrate binutils (and glibc to 2.15) every time i need
> to compiled and e 3.19.X kernel.

Well you are allowed to install an older binutils in another location
and set your path.  You can even set your LD_LIBRARY_PATH if you really
also need an older glibc to do it (not idea why that would be needed).

You may have hit this binutils bug: https://sourceware.org/bugzilla/show_bug.cgi?id=19807
Also maybe related: https://bugzilla.kernel.org/show_bug.cgi?id=114671

-- 
Len Sorensen