Re: [PATCH v2 6/6] bus: Add support for Tegra Generic Memory Interface

From: Jon Hunter
Date: Fri Aug 26 2016 - 04:22:29 EST



On 24/08/16 14:37, Mirza Krak wrote:
> From: Mirza Krak <mirza.krak@xxxxxxxxx>
>
> The Generic Memory Interface bus can be used to connect high-speed
> devices such as NOR flash, FPGAs, DSPs...
>
> Signed-off-by: Mirza Krak <mirza.krak@xxxxxxxxx>
> ---
> Changes in v2:
> - Fixed some checkpatch errors
> - Re-ordered probe to get rid of local variables
> - Moved of_platform_default_populate call to the end of probe
> - Use the timing and configuration properties from the child device
> - Added warning if more then 1 child device exist
>
>
> drivers/bus/Kconfig | 8 ++
> drivers/bus/Makefile | 1 +
> drivers/bus/tegra-gmi.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 240 insertions(+)
> create mode 100644 drivers/bus/tegra-gmi.c
>
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index 4ed7d26..2e75a7f 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -141,6 +141,14 @@ config TEGRA_ACONNECT
> Driver for the Tegra ACONNECT bus which is used to interface with
> the devices inside the Audio Processing Engine (APE) for Tegra210.
>
> +config TEGRA_GMI
> + tristate "Tegra Generic Memory Interface bus driver"
> + depends on ARCH_TEGRA
> + help
> + Driver for the Tegra Generic Memory Interface bus which can be used
> + to attach devices such as NOR, UART, FPGA and more.
> +
> +
> config UNIPHIER_SYSTEM_BUS
> tristate "UniPhier System Bus driver"
> depends on ARCH_UNIPHIER && OF
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> index ac84cc4..34e2bab 100644
> --- a/drivers/bus/Makefile
> +++ b/drivers/bus/Makefile
> @@ -18,5 +18,6 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
> obj-$(CONFIG_SUNXI_RSB) += sunxi-rsb.o
> obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
> obj-$(CONFIG_TEGRA_ACONNECT) += tegra-aconnect.o
> +obj-$(CONFIG_TEGRA_GMI) += tegra-gmi.o
> obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
> obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
> diff --git a/drivers/bus/tegra-gmi.c b/drivers/bus/tegra-gmi.c
> new file mode 100644
> index 0000000..b068ef9
> --- /dev/null
> +++ b/drivers/bus/tegra-gmi.c
> @@ -0,0 +1,231 @@
> +/*
> + * Driver for NVIDIA Generic Memory Interface
> + *
> + * Copyright (C) 2016 Host Mobility AB. All rights reserved.
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/reset.h>
> +
> +#define TEGRA_GMI_CONFIG 0x00
> +#define TEGRA_GMI_CONFIG_GO BIT(31)
> +#define TEGRA_GMI_BUS_WIDTH_32BIT BIT(30)
> +#define TEGRA_GMI_MUX_MODE BIT(28)
> +#define TEGRA_GMI_RDY_BEFORE_DATA BIT(24)
> +#define TEGRA_GMI_RDY_ACTIVE_HIGH BIT(23)
> +#define TEGRA_GMI_ADV_ACTIVE_HIGH BIT(22)
> +#define TEGRA_GMI_OE_ACTIVE_HIGH BIT(21)
> +#define TEGRA_GMI_CS_ACTIVE_HIGH BIT(20)
> +#define TEGRA_GMI_CS_SELECT(x) ((x & 0x7) << 4)
> +
> +#define TEGRA_GMI_TIMING0 0x10
> +#define TEGRA_GMI_MUXED_WIDTH(x) ((x & 0xf) << 12)
> +#define TEGRA_GMI_HOLD_WIDTH(x) ((x & 0xf) << 8)
> +#define TEGRA_GMI_ADV_WIDTH(x) ((x & 0xf) << 4)
> +#define TEGRA_GMI_CE_WIDTH(x) (x & 0xf)
> +
> +#define TEGRA_GMI_TIMING1 0x14
> +#define TEGRA_GMI_WE_WIDTH(x) ((x & 0xff) << 16)
> +#define TEGRA_GMI_OE_WIDTH(x) ((x & 0xff) << 8)
> +#define TEGRA_GMI_WAIT_WIDTH(x) (x & 0xff)
> +
> +struct tegra_gmi_priv {
> + void __iomem *base;
> + struct reset_control *rst;
> + struct clk *clk;
> +
> + u32 snor_config;
> + u32 snor_timing0;
> + u32 snor_timing1;
> +};
> +
> +static void tegra_gmi_init(struct device *dev, struct tegra_gmi_priv *priv)
> +{
> + writel(priv->snor_timing0, priv->base + TEGRA_GMI_TIMING0);
> + writel(priv->snor_timing1, priv->base + TEGRA_GMI_TIMING1);
> +
> + priv->snor_config |= TEGRA_GMI_CONFIG_GO;
> + writel(priv->snor_config, priv->base + TEGRA_GMI_CONFIG);
> +}
> +
> +static void tegra_gmi_parse_dt(struct device *dev, struct tegra_gmi_priv *priv)
> +{
> + struct device_node *child = of_get_next_available_child(dev->of_node,
> + NULL);
> + u32 property;
> +
> + if (!child) {
> + dev_warn(dev, "no child nodes found\n");
> + return;
> + }
> +
> + /*
> + * We currently only support one child device due to lack of
> + * chip-select address decoding. Which means that we only have one
> + * chip-select line from the GMI controller.
> + */
> + if (of_get_child_count(dev->of_node) > 1)
> + dev_warn(dev, "only one child device is supported.");
> +
> + if (of_property_read_bool(child, "nvidia,snor-data-width-32bit"))
> + priv->snor_config |= TEGRA_GMI_BUS_WIDTH_32BIT;
> +
> + if (of_property_read_bool(child, "nvidia,snor-mux-mode"))
> + priv->snor_config |= TEGRA_GMI_MUX_MODE;
> +
> + if (of_property_read_bool(child, "nvidia,snor-rdy-active-before-data"))
> + priv->snor_config |= TEGRA_GMI_RDY_BEFORE_DATA;
> +
> + if (of_property_read_bool(child, "nvidia,snor-rdy-inv"))
> + priv->snor_config |= TEGRA_GMI_RDY_ACTIVE_HIGH;
> +
> + if (of_property_read_bool(child, "nvidia,snor-adv-inv"))
> + priv->snor_config |= TEGRA_GMI_ADV_ACTIVE_HIGH;
> +
> + if (of_property_read_bool(child, "nvidia,snor-oe-inv"))
> + priv->snor_config |= TEGRA_GMI_OE_ACTIVE_HIGH;
> +
> + if (of_property_read_bool(child, "nvidia,snor-cs-inv"))
> + priv->snor_config |= TEGRA_GMI_CS_ACTIVE_HIGH;
> +
> + /* Use the reg property to determine which CS is to be used. */
> + if (!of_property_read_u32(child, "reg", &property))
> + priv->snor_config |= TEGRA_GMI_CS_SELECT(property);
> +
> + /* The default values that are provided below are reset values */
> + if (!of_property_read_u32(child, "nvidia,snor-muxed-width", &property))
> + priv->snor_timing0 |= TEGRA_GMI_MUXED_WIDTH(property);
> + else
> + priv->snor_timing0 |= TEGRA_GMI_MUXED_WIDTH(1);
> +
> + if (!of_property_read_u32(child, "nvidia,snor-hold-width", &property))
> + priv->snor_timing0 |= TEGRA_GMI_HOLD_WIDTH(property);
> + else
> + priv->snor_timing0 |= TEGRA_GMI_HOLD_WIDTH(1);
> +
> + if (!of_property_read_u32(child, "nvidia,snor-adv-width", &property))
> + priv->snor_timing0 |= TEGRA_GMI_ADV_WIDTH(property);
> + else
> + priv->snor_timing0 |= TEGRA_GMI_ADV_WIDTH(1);
> +
> + if (!of_property_read_u32(child, "nvidia,snor-ce-width", &property))
> + priv->snor_timing0 |= TEGRA_GMI_CE_WIDTH(property);
> + else
> + priv->snor_timing0 |= TEGRA_GMI_CE_WIDTH(4);
> +
> + if (!of_property_read_u32(child, "nvidia,snor-we-width", &property))
> + priv->snor_timing1 |= TEGRA_GMI_WE_WIDTH(property);
> + else
> + priv->snor_timing1 |= TEGRA_GMI_WE_WIDTH(1);
> +
> + if (!of_property_read_u32(child, "nvidia,snor-oe-width", &property))
> + priv->snor_timing1 |= TEGRA_GMI_OE_WIDTH(property);
> + else
> + priv->snor_timing1 |= TEGRA_GMI_OE_WIDTH(1);
> +
> + if (!of_property_read_u32(child, "nvidia,snor-wait-width", &property))
> + priv->snor_timing1 |= TEGRA_GMI_WAIT_WIDTH(property);
> + else
> + priv->snor_timing1 |= TEGRA_GMI_WAIT_WIDTH(3);
> +
> + of_node_put(child);
> +}
> +
> +static int tegra_gmi_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + struct device *dev = &pdev->dev;
> + struct tegra_gmi_priv *priv;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(priv->base))
> + return PTR_ERR(priv->base);
> +
> + priv->clk = devm_clk_get(dev, "gmi");
> + if (IS_ERR(priv->clk)) {
> + dev_err(dev, "can not get clock\n");
> + return PTR_ERR(priv->clk);
> + }
> +
> + priv->rst = devm_reset_control_get(dev, "gmi");
> + if (IS_ERR(priv->rst)) {
> + dev_err(dev, "can not get reset\n");
> + return PTR_ERR(priv->rst);
> + }
> +
> + ret = clk_prepare_enable(priv->clk);
> + if (ret) {
> + dev_err(dev, "fail to enable clock.\n");
> + return ret;
> + }
> +
> + reset_control_assert(priv->rst);
> + udelay(2);
> + reset_control_deassert(priv->rst);
> +
> + tegra_gmi_parse_dt(dev, priv);
> + tegra_gmi_init(dev, priv);
> +
> + ret = of_platform_default_populate(dev->of_node, NULL, dev);
> + if (ret < 0) {
> + dev_err(dev, "fail to create devices.\n");
> + clk_disable_unprepare(priv->clk);
> + reset_control_assert(priv->rst);

nit ... I would assert the reset first and then disable the clock. This
allows the reset a few clocks to reset the logic.

Do you also need to clear the GO bit like in the remove here for
consistency? Could be worth adding a helper function to do this.

> + return ret;
> + }
> +
> + dev_set_drvdata(dev, priv);
> +
> + return 0;
> +}
> +
> +static int tegra_gmi_remove(struct platform_device *pdev)
> +{
> + struct tegra_gmi_priv *priv = dev_get_drvdata(&pdev->dev);
> + u32 config;
> +
> + of_platform_depopulate(&pdev->dev);
> +
> + config = readl(priv->base + TEGRA_GMI_CONFIG);
> + config &= ~TEGRA_GMI_CONFIG_GO;
> + writel(config, priv->base + TEGRA_GMI_CONFIG);
> +
> + clk_disable_unprepare(priv->clk);
> + reset_control_assert(priv->rst);

I would re-order the reset and clock here as well.

Otherwise ...

Reviewed-by: Jon Hunter <jonathanh@xxxxxxxxxx>

Cheers
Jon

--
nvpublic