Re: [PATCH 1/6] mtd: spi-nor: Add quad page program support

From: Jagan Teki
Date: Mon Aug 29 2016 - 09:25:04 EST


On Wed, Aug 10, 2016 at 2:10 AM, Jagan Teki <jteki@xxxxxxxxxxxx> wrote:
> Add quad page program support with the use of nor->flags
> and then controller will use 4 lines for data transmission
> which is quite faster than page program(02h)
>
> Cc: Brian Norris <computersforpeace@xxxxxxxxx>
> Signed-off-by: Jagan Teki <jteki@xxxxxxxxxxxx>
> ---
> drivers/mtd/spi-nor/spi-nor.c | 13 +++++++++++++
> include/linux/mtd/spi-nor.h | 2 ++
> 2 files changed, 15 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d0fc165..f88bd7e 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -75,6 +75,7 @@ struct flash_info {
> * bit. Must be used with
> * SPI_NOR_HAS_LOCK.
> */
> +#define SPI_NOR_QUAD_WRITE BIT(10) /* Flash supports Quad Write */
> };
>
> #define JEDEC_MFR(info) ((info)->id[0])
> @@ -1306,6 +1307,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> struct device *dev = nor->dev;
> struct mtd_info *mtd = &nor->mtd;
> struct device_node *np = spi_nor_get_flash_node(nor);
> + bool need_quad = false;
> int ret;
> int i;
>
> @@ -1441,6 +1443,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> return ret;
> }
> nor->flash_read = SPI_NOR_QUAD;
> + need_quad = true;
> } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
> nor->flash_read = SPI_NOR_DUAL;
> }
> @@ -1465,6 +1468,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> }
>
> nor->program_opcode = SPINOR_OP_PP;
> + if (nor->flags == SNOR_F_USE_QPP && info->flags & SPI_NOR_QUAD_WRITE) {
> + if (!need_quad)
> + ret = set_quad_mode(nor, info);
> + if (ret) {
> + dev_err(dev, "quad mode not supported\n");
> + return ret;
> + }
> + }
> + nor->program_opcode = SPINOR_OP_QPP;
> + }
>
> if (info->addr_width)
> nor->addr_width = info->addr_width;
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index c425c7b..aa0e6cd 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -46,6 +46,7 @@
> #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */
> #define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */
> #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */
> +#define SPINOR_OP_QPP 0x32 /* Quad Page program */
> #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */
> #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
> #define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */
> @@ -119,6 +120,7 @@ enum spi_nor_ops {
> enum spi_nor_option_flags {
> SNOR_F_USE_FSR = BIT(0),
> SNOR_F_HAS_SR_TB = BIT(1),
> + SNOR_F_USE_QPP = BIT(2),
> };
>
> /**
> --
> 2.7.4
>

Ping!

--
Jagan Teki