Re: [PATCH 1/2] dt-bindings: msm8996-pcie-phy: add support for msm8996 pcie phy

[Srinivas Kandagatla]

On 16/09/16 14:52, Rob Herring wrote:
> On Wed, Sep 07, 2016 at 11:55:32AM +0100, Srinivas Kandagatla wrote:
> > This patch adds bindings for pcie phy on MSM8996.
> >
> > This PHY has 3 Ports, including a common block. Each port is connected
> > to one root complex. Each port has dedicated reset control lines apart
> > from common reset and clocks for common block.
> >
> > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> > ---
> >  .../bindings/phy/qcom-msm8996-pcie-phy.txt         | 62 ++++++++++++++++++++++
> >  1 file changed, 62 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/phy/qcom-msm8996-pcie-phy.txt
> >
> > diff --git a/Documentation/devicetree/bindings/phy/qcom-msm8996-pcie-phy.txt b/Documentation/devicetree/bindings/phy/qcom-msm8996-pcie-phy.txt
> > new file mode 100644
> > index 0000000..51930ed
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/qcom-msm8996-pcie-phy.txt
> > @@ -0,0 +1,62 @@
> > +Qualcomm msm8996 pcie PHY
> > +------------------------
> > +
> > +Required properties:
> > +- compatible: compatible list, contains "qcom,msm8996-pcie-phy".
>
> 8994 has PCIe, this phy is completely different? And Archit mentioned
> another SoC, too.

Recently I too learned that this phy IP is used across USB, UFS and 
other SOCs, so Am planning to dump this patchset and write one common 
driver.

Thanks,
srini
> Rob