Re: [PATCH v5 2/2] usb: chipidea: imx: Add binding to disable USB 60Mhz clock

[Sascha Hauer]

On Wed, Sep 21, 2016 at 11:07:07AM +0200, Fabien Lahoudere wrote:
> This binding allow to disable the internal 60Mhz clock for USB host2 or
> host3.
> 
> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt |  1 +
>  drivers/usb/chipidea/ci_hdrc_imx.c                     |  2 ++
>  drivers/usb/chipidea/ci_hdrc_imx.h                     |  1 +
>  drivers/usb/chipidea/usbmisc_imx.c                     | 13 +++++++++++++
>  4 files changed, 17 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> index 0e03344..f83da66 100644
> --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> @@ -84,6 +84,7 @@ i.mx specific properties
>  - over-current-active-high: over current signal polarity is high active,
>    typically over current signal polarity is low active.
>  - external-vbus-divider: enables off-chip resistor divider for Vbus
> +- disable-int60ck: disable internal 60MHz clock for usb host2 or host3 on imx53

Why do we need a binding for this? I would assume the driver should know
whether this clock is in use or not. If it doesn't that's a problem we
should solve.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |