On Wed, Oct 5, 2016 at 12:24 AM, Maxime Ripard
On Tue, Oct 04, 2016 at 11:46:21AM +0200, MylÃne Josserand wrote:
Add the documentation for dt-binding of the analog audiocodec
driver for SUN8I SoC.
Signed-off-by: MylÃne Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
.../devicetree/bindings/sound/sun8i-codec-analog.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
new file mode 100644
@@ -0,0 +1,20 @@
+* Allwinner A23/A33 Analog Codec
+This codec must be handled as a PRCM subnode.
Like Mark was saying, you should probably reference the sun6i-prcm.txt
+- compatible: must be either "allwinner,sun8i-codec-analog"
Our compatible prefix is <family>-<soc>, and using the older SoC that
introduced that block.
In this case, that would be sun6i-a31, I think?
sun6i-a31s actually, but a31s has extra line out controls,
so the right one would be sun8i-a23. Both are listed in my