[PATCH 4.7 061/141] regulator: pwm: Fix regulator ramp delay for continuous mode
From: Greg Kroah-Hartman
Date: Thu Oct 06 2016 - 04:39:04 EST
4.7-stable review patch. If anyone has any objections, please let me know.
From: Douglas Anderson <dianders@xxxxxxxxxxxx>
commit c2588393e6315ab68207323d37d2a73713d6bc81 upstream.
The original commit adding support for continuous voltage mode didn't
handle the regulator ramp delay properly. It treated the delay as a
fixed delay in uS despite the property being defined as uV / uS. Let's
adjust it. Luckily there appear to be no users of this ramp delay for
PWM regulators (as per grepping through device trees in linuxnext).
Note also that the upper bound of usleep_range probably shouldn't be a
full 1 ms longer than the lower bound since I've seen plenty of hardware
with a ramp rate of ~5000 uS / uV and for small jumps the total delays
are in the tens of uS. 1000 is way too much. We'll try to be dynamic
and use 10%.
NOTE: This commit doesn't add support for regulator-enable-ramp-delay.
That could be done in a future patch when someone has a user of that
Though this patch is shows as "fixing" a bug, there are no actual known
users of continuous mode PWM regulator w/ ramp delay in mainline and so
this likely won't have any effect on anyone unless they are working
out-of-tree with private patches. For anyone in this state, it is
highly encouraged to also pick Boris Brezillon's WIP patches to get
yourself a reliable and glitch-free regulator.
Fixes: 4773be185a0f ("regulator: pwm-regulator: Add support for continuous-voltage")
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Acked-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
drivers/regulator/pwm-regulator.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
@@ -132,6 +132,7 @@ static int pwm_regulator_set_voltage(str
unsigned int duty_pulse;
+ int old_uV = pwm_regulator_get_voltage(rdev);
@@ -166,8 +167,12 @@ static int pwm_regulator_set_voltage(str
drvdata->volt_uV = min_uV;
- /* Delay required by PWM regulator to settle to the new voltage */
- usleep_range(ramp_delay, ramp_delay + 1000);
+ if ((ramp_delay == 0) || !pwm_regulator_is_enabled(rdev))
+ return 0;
+ /* Ramp delay is in uV/uS. Adjust to uS and delay */
+ ramp_delay = DIV_ROUND_UP(abs(min_uV - old_uV), ramp_delay);
+ usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));