Re: [PATCH v7 0/8] power: add power sequence library

From: Peter Chen
Date: Sat Oct 08 2016 - 04:57:42 EST


On Mon, Sep 26, 2016 at 02:26:49PM +0800, Peter Chen wrote:
> On Tue, Sep 20, 2016 at 11:36:39AM +0800, Peter Chen wrote:
> > Hi all,
> >
> > This is a follow-up for my last power sequence framework patch set [1].
> > According to Rob Herring and Ulf Hansson's comments[2]. The kinds of
> > power sequence instances will be added at postcore_initcall, the match
> > criteria is compatible string first, if the compatible string is not
> > matched between dts and library, it will try to use generic power sequence.
> >
> > The host driver just needs to call of_pwrseq_on/of_pwrseq_off
> > if only one power sequence instance is needed, for more power sequences
> > are used, using of_pwrseq_on_list/of_pwrseq_off_list instead (eg, USB hub driver).
> >
> > In future, if there are special power sequence requirements, the special
> > power sequence library can be created.
> >
> > This patch set is tested on i.mx6 sabresx evk using a dts change, I use
> > two hot-plug devices to simulate this use case, the related binding
> > change is updated at patch [1/6], The udoo board changes were tested
> > using my last power sequence patch set.[3]
> >
> > Except for hard-wired MMC and USB devices, I find the USB ULPI PHY also
> > need to power on itself before it can be found by ULPI bus.
> >
> > [1] http://www.spinics.net/lists/linux-usb/msg142755.html
> > [2] http://www.spinics.net/lists/linux-usb/msg143106.html
> > [3] http://www.spinics.net/lists/linux-usb/msg142815.html
> >
> > Changes for v7:
> > - Create kinds of power sequence instance at postcore_initcall, and match
> > the instance with node using compatible string, the beneit of this is
> > the host driver doesn't need to consider which pwrseq instance needs
> > to be used, and pwrseq core will match it, however, it eats some memories
> > if less power sequence instances are used. [Patch 2/8]
> > - Add pwrseq_compatible_sample.c to test match pwrseq using device_id. [Patch 2/8]
> > - Fix the comments Vaibhav Hiremath adds for error path for clock and do not
> > use device_node for parameters at pwrseq_on. [Patch 2/8]
> > - Simplify the caller to use power sequence, follows Alan's commnets [Patch 4/8]
> > - Tested three pwrseq instances together using both specific compatible string and
> > generic libraries.
> >
>
> Hi Vaibhav, would you please test if this series can support your case,
> you can add one instance like pwrseq_compatible_sample? If you are busy
> now, but think this series can satisfy your requirement, please ack it.
> I will delete pwrseq_compatible_sample, and only submit the generic one
> at next revision, you can add it later, thanks.
>

ping...

Vaibhav, if you have no more comments, I will delete the
pwrseq_compatible_sample, and send v8.

Peter
> Peter
>
> > Changes for v6:
> > - Add Matthias Kaehlcke's Reviewed-by and Tested-by. (patch [2/6])
> > - Change chipidea core of_node assignment for coming user. (patch [5/6])
> > - Applies Joshua Clayton's three dts changes for two boards,
> > the USB device's reg has only #address-cells, but without #size-cells.
> >
> > Changes for v5:
> > - Delete pwrseq_register/pwrseq_unregister, which is useless currently
> > - Fix the linker error when the pwrseq user is compiled as module
> >
> > Changes for v4:
> > - Create the patch on next-20160722
> > - Fix the of_node is not NULL after chipidea driver is unbinded [Patch 5/6]
> > - Using more friendly wait method for reset gpio [Patch 2/6]
> > - Support multiple input clocks [Patch 2/6]
> > - Add Rob Herring's ack for DT changes
> > - Add Joshua Clayton's Tested-by
> >
> > Changes for v3:
> > - Delete "power-sequence" property at binding-doc, and change related code
> > at both library and user code.
> > - Change binding-doc example node name with Rob's comments
> > - of_get_named_gpio_flags only gets the gpio, but without setting gpio flags,
> > add additional code request gpio with proper gpio flags
> > - Add Philipp Zabel's Ack and MAINTAINER's entry
> >
> > Changes for v2:
> > - Delete "pwrseq" prefix and clock-names for properties at dt binding
> > - Should use structure not but its pointer for kzalloc
> > - Since chipidea core has no of_node, let core's of_node equals glue
> > layer's at core's probe
> >
> > Joshua Clayton (2):
> > ARM: dts: imx6qdl: Enable usb node children with <reg>
> > ARM: dts: imx6q-evi: Fix onboard hub reset line
> >
> > Peter Chen (6):
> > binding-doc: power: pwrseq-generic: add binding doc for generic power
> > sequence library
> > power: add power sequence library
> > binding-doc: usb: usb-device: add optional properties for power
> > sequence
> > usb: core: add power sequence handling for USB devices
> > usb: chipidea: let chipidea core device of_node equal's glue layer
> > device of_node
> > ARM: dts: imx6qdl-udoo.dtsi: fix onboard USB HUB property
> >
> > .../bindings/power/pwrseq/pwrseq-generic.txt | 48 ++++++
> > .../devicetree/bindings/usb/usb-device.txt | 10 +-
> > MAINTAINERS | 9 +
> > arch/arm/boot/dts/imx6q-evi.dts | 25 +--
> > arch/arm/boot/dts/imx6qdl-udoo.dtsi | 26 ++-
> > arch/arm/boot/dts/imx6qdl.dtsi | 6 +
> > drivers/power/Kconfig | 1 +
> > drivers/power/Makefile | 1 +
> > drivers/power/pwrseq/Kconfig | 45 +++++
> > drivers/power/pwrseq/Makefile | 3 +
> > drivers/power/pwrseq/core.c | 190 +++++++++++++++++++++
> > drivers/power/pwrseq/pwrseq_compatible_sample.c | 178 +++++++++++++++++++
> > drivers/power/pwrseq/pwrseq_generic.c | 177 +++++++++++++++++++
> > drivers/usb/chipidea/core.c | 27 ++-
> > drivers/usb/core/hub.c | 41 ++++-
> > drivers/usb/core/hub.h | 1 +
> > include/linux/power/pwrseq.h | 73 ++++++++
> > 17 files changed, 820 insertions(+), 41 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt
> > create mode 100644 drivers/power/pwrseq/Kconfig
> > create mode 100644 drivers/power/pwrseq/Makefile
> > create mode 100644 drivers/power/pwrseq/core.c
> > create mode 100644 drivers/power/pwrseq/pwrseq_compatible_sample.c
> > create mode 100644 drivers/power/pwrseq/pwrseq_generic.c
> > create mode 100644 include/linux/power/pwrseq.h
> >
> > --
> > 2.7.4
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
>
> Best Regards,
> Peter Chen

--

Best Regards,
Peter Chen