[PATCH] regulator/overview.txt: Use ".." for ranges, instead of "->"

From: Pavel Machek
Date: Tue Oct 11 2016 - 03:33:01 EST


Using "->" to indicate range is not too common, switch to ".."

Signed-off-by: Pavel Machek <pavel@xxxxxx>

--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -90,7 +90,7 @@ Some terms used in this document:-
operating parameters and is specified in the regulator
datasheet. i.e.

- - voltage output is in the range 800mV -> 3500mV.
+ - voltage output is in the range 800mV .. 3500mV.
- regulator current output limit is 20mA @ 5V but is
10mA @ 10V.

@@ -99,8 +99,8 @@ Some terms used in this document:-
power domain to a particular power range. i.e.

- Domain-1 voltage is 3300mV
- - Domain-2 voltage is 1400mV -> 1600mV
- - Domain-3 current limit is 0mA -> 20mA.
+ - Domain-2 voltage is 1400mV .. 1600mV
+ - Domain-3 current limit is 0mA .. 20mA.

Consumer Level: This is defined by consumer drivers
dynamically setting voltage or current limit levels.

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature