[PATCH] regulator: pwm: fix syntax errors in the examples

From: Peter Rosin
Date: Sat Oct 15 2016 - 09:02:21 EST


While at it, clean up some other things as well.

Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
.../devicetree/bindings/regulator/pwm-regulator.txt | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index 3aeba9f86ed8..6d98fbaeb506 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -55,11 +55,11 @@ Optional properties:
- enable-gpios: GPIO to use to enable/disable the regulator

Any property defined as part of the core regulator binding can also be used.
-(See: ../regulator/regulator.txt)
+(See: regulator.txt)

Continuous Voltage With Enable GPIO Example:
- pwm_regulator {
- compatible = "pwm-regulator;
+ pwm-regulator {
+ compatible = "pwm-regulator";
pwms = <&pwm1 0 8448 0>;
enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
regulator-min-microvolt = <1016000>;
@@ -71,12 +71,12 @@ Continuous Voltage With Enable GPIO Example:
* Inverted PWM logic, and the duty cycle range is limited
* to 30%-70%.
*/
- pwm-dutycycle-range <700 300>; /* */
+ pwm-dutycycle-range <700 300>;
};

Voltage Table Example:
- pwm_regulator {
- compatible = "pwm-regulator;
+ pwm-regulator {
+ compatible = "pwm-regulator";
pwms = <&pwm1 0 8448 0>;
regulator-min-microvolt = <1016000>;
regulator-max-microvolt = <1114000>;
--
2.1.4