[PATCH v2 0/3] support smc91x on mainstone and devicetree

From: Robert Jarzmik
Date: Sat Oct 15 2016 - 15:31:56 EST

This serie aims at bringing support to mainstone board on a device-tree based
build, as what is already in place for legacy mainstone.

The bulk of the mainstone "specific" behavior is that a u16 write doesn't work
on a address of the form 4*n + 2, while it works on 4*n.

The legacy workaround was in SMC_outw(), with calls to
machine_is_mainstone(). These calls don't work with a pxa27x-dt machine type,
which is used when a generic device-tree pxa27x machine is used to boot the
mainstone board.

Therefore, this serie enables the smc91c111 adapter of the mainstone board to
work on a device-tree build, exaclty as it's been working for years with the
legacy arch/arm/mach-pxa/mainstone.c definition.



Robert Jarzmik (3):
net: smc91x: isolate u16 writes alignment workaround
net: smc91x: take into account half-word workaround
net: smsc91x: add u16 workaround for pxa platforms

.../devicetree/bindings/net/smsc-lan91c111.txt | 2 +
drivers/net/ethernet/smsc/smc91x.c | 8 ++-
drivers/net/ethernet/smsc/smc91x.h | 78 ++++++++++++----------
3 files changed, 52 insertions(+), 36 deletions(-)