Re: [PATCH/RFT v2 17/17] ARM: dts: da850: add usb device node

From: Axel Haslam
Date: Tue Oct 25 2016 - 04:04:39 EST


On Tue, Oct 25, 2016 at 2:48 AM, David Lechner <david@xxxxxxxxxxxxxx> wrote:
> On 10/24/2016 11:46 AM, ahaslam@xxxxxxxxxxxx wrote:
>>
>> From: Axel Haslam <ahaslam@xxxxxxxxxxxx>
>>
>> This adds the usb (ohci) device node for the da850 soc.
>> Also it enables it for the lcdk board
>>
>> Signed-off-by: Axel Haslam <ahaslam@xxxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++
>> arch/arm/boot/dts/da850.dtsi | 8 ++++++++
>> 2 files changed, 16 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/da850-lcdk.dts
>> b/arch/arm/boot/dts/da850-lcdk.dts
>> index 7b8ab21..fa91339 100644
>> --- a/arch/arm/boot/dts/da850-lcdk.dts
>> +++ b/arch/arm/boot/dts/da850-lcdk.dts
>> @@ -86,6 +86,14 @@
>> };
>> };
>>
>> +&usb_phy {
>> + status = "okay";
>> +};
>> +
>> +&usb {
>> + status = "okay";
>
>
> Don't you need to specify a regulator here using the vbus-supply property?

its is not mandatory, the regulator framework is giving a dummy supply
on regulator_get if it does not find a regulator on device tree. That is
what i could understand from: _regulator_get in regulator/core.c

Also, in the case of platform based boot, if the board init calls
regulator_has_full_constraints which is anyways needed for the phy to probe
correctly it will also return a dummy regulator.


>
>> +};
>> +
>> &serial2 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&serial2_rxtx_pins>;
>> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
>> index 33fcdce..ec2cec3 100644
>> --- a/arch/arm/boot/dts/da850.dtsi
>> +++ b/arch/arm/boot/dts/da850.dtsi
>> @@ -381,6 +381,14 @@
>> #phy-cells = <1>;
>> status = "disabled";
>> };
>> + usb: usb@0225000 {
>
>
> Don't need the leading 0 on usb@225000
>
> The alias (usb:) might need to be more specific since there is a second usb
> device that will be added later for musb. (The comments in the previous
> review only referred to the "usb" in "usb@", not the alias.)

ok.

>
>> + compatible = "ti,da830-ohci";
>> + reg = <0x225000 0x1000>;
>> + interrupts = <59>;
>> + phys = <&usb_phy 1>;
>> + phy-names = "usb-phy";
>> + status = "disabled";
>> + };
>> gpio: gpio@226000 {
>> compatible = "ti,dm6441-gpio";
>> gpio-controller;
>>
>