[PATCHv2] clk: xgene: Don't call __pa on ioremaped address

From: Laura Abbott
Date: Fri Oct 28 2016 - 13:00:05 EST


ioremaped addresses are not linearly mapped so the physical
address can not be figured out via __pa. More generally, there
is no guarantee that backing value of an ioremapped address
is a physical address at all. The value here is only used
for debugging so just drop the call to __pa on the ioremapped
address.

Fixes: 6ae5fd381251 ("clk: xgene: Silence sparse warnings")
Signed-off-by: Laura Abbott <labbott@xxxxxxxxxx>
---
v2: Fix up one more format string

I put the fixes tag to match with the cleanup that was done.
If there is interest in this fix for pre-4.2 kernels for
stable, I can submit a patch for that as well.
---
drivers/clk/clk-xgene.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/clk-xgene.c b/drivers/clk/clk-xgene.c
index 3433132..1e67655 100644
--- a/drivers/clk/clk-xgene.c
+++ b/drivers/clk/clk-xgene.c
@@ -243,22 +243,20 @@ static int xgene_clk_enable(struct clk_hw *hw)
struct xgene_clk *pclk = to_xgene_clk(hw);
unsigned long flags = 0;
u32 data;
- phys_addr_t reg;

if (pclk->lock)
spin_lock_irqsave(pclk->lock, flags);

if (pclk->param.csr_reg != NULL) {
pr_debug("%s clock enabled\n", clk_hw_get_name(hw));
- reg = __pa(pclk->param.csr_reg);
/* First enable the clock */
data = xgene_clk_read(pclk->param.csr_reg +
pclk->param.reg_clk_offset);
data |= pclk->param.reg_clk_mask;
xgene_clk_write(data, pclk->param.csr_reg +
pclk->param.reg_clk_offset);
- pr_debug("%s clock PADDR base %pa clk offset 0x%08X mask 0x%08X value 0x%08X\n",
- clk_hw_get_name(hw), &reg,
+ pr_debug("%s clk offset 0x%08X mask 0x%08X value 0x%08X\n",
+ clk_hw_get_name(hw),
pclk->param.reg_clk_offset, pclk->param.reg_clk_mask,
data);

@@ -268,8 +266,8 @@ static int xgene_clk_enable(struct clk_hw *hw)
data &= ~pclk->param.reg_csr_mask;
xgene_clk_write(data, pclk->param.csr_reg +
pclk->param.reg_csr_offset);
- pr_debug("%s CSR RESET PADDR base %pa csr offset 0x%08X mask 0x%08X value 0x%08X\n",
- clk_hw_get_name(hw), &reg,
+ pr_debug("%s csr offset 0x%08X mask 0x%08X value 0x%08X\n",
+ clk_hw_get_name(hw),
pclk->param.reg_csr_offset, pclk->param.reg_csr_mask,
data);
}
--
2.7.4