Re: [RESEND PATCH 2/3] ARM: davinci: hawk: Remove vbus and over current gpios

From: Sekhar Nori
Date: Tue Nov 22 2016 - 05:38:56 EST

On Monday 21 November 2016 10:23 PM, Axel Haslam wrote:
> The hawk board VBUS is fixed to a 5v source, and the over
> current pin is actually not connected to the SoC.
> Do not reseve these gpios for OHCI as they are not related
> to usb.
> Signed-off-by: Axel Haslam <ahaslam@xxxxxxxxxxxx>

As discussed over the MMC/SD patches, this patch should be based off the
hawkboard schematic, not the LCDK schematic.